My Inquiry
My Account
Infineon Technologies CY8C26233-24PVXI
- Part No.:
- CY8C26233-24PVXI
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 20-SSOP (0.209", 5.30mm Width)
- Datasheet:
-
CY8C26233-24PVXI.pdf
- Description:
- IC MCU 8BIT 8KB FLASH 20SSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,655
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY8C26233-24PVXI from Cypress Semiconductor is a programmable System-on-Chip (PSoC™) integrating an M8C 8-bit Harvard architecture CPU, 8K Flash, 256 bytes SRAM, 12 configurable analog blocks (including up to 11-bit Delta-Sigma ADC and 9-bit DAC), and 8 digital PSoC blocks (supporting PWM, UART, SPI, CRC). It operates at up to 24 MHz with 3.0–5.25 V supply and targets embedded control in industrial sensors and motor interface modules.
For engineers reviewing the CY8C26233-24PVXI datasheet, CY8C26233-24PVXI pinout, CY8C26233-24PVXI application, or CY8C26233-24PVXI equivalent, key selection considerations include its 28-pin SSOP package, ISSP™ in-system programming capability, analog block configurability via PSoC Designer GUI, and legacy support status as Not Recommended for New Designs per Cypress Rev. *C documentation.
Technical Context
This device implements a fully static CMOS PSoC architecture with dual-array programmability: analog blocks support Delta-Sigma and incremental ADCs, programmable gain amplifiers, and differential comparators; digital blocks deliver multipurpose timers, full-duplex UARTs, and SPI master/slave operation. All peripherals are routed through a flexible interconnect matrix.
Clocking combines internal 24/48 MHz oscillators (±2.5%), optional 32.768 kHz crystal input for PLL synchronization, and low-speed oscillator for watchdog/sleep modes. Memory includes 50,000-cycle Flash with EEPROM emulation (2,304 bytes) and partial update support.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | M8C 8-bit Harvard architecture with 24 MHz max clock and hardware multiply/accumulate |
| Flash Memory | 8 KB program memory with 50,000 erase/write cycles and ISSP™ in-system programming |
| SRAM | 256 bytes data memory for runtime variables and stack |
| Analog Blocks | 12 user-configurable blocks supporting Delta-Sigma ADC (11-bit), DAC (9-bit), PGA, filters, comparators |
| Digital Blocks | 8 programmable blocks providing PWM, UART, SPI, CRC, and real-time clock functions |
| Operating Voltage | 3.0–5.25 V nominal; supports down to 1.0 V using on-chip switch-mode voltage pump |
| Temperature Range | -40°C to +85°C industrial grade operation |
Pinout & Package
Package: 28-pin SSOP (Small Outline Integrated Circuit), body width 5.3 mm, lead pitch 0.65 mm, JEDEC MO-153 compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD | Power supply input | Main 3.0–5.25 V supply for core and I/O; decoupling required near pin |
| VSS | Ground reference | Digital and analog ground common return path |
| XIN/XOUT | Crystal oscillator terminals | Supports external 32.768 kHz crystal for precision timing or PLL reference |
| RESET | Active-low reset input | Asynchronous reset assertion clears CPU registers and halts execution |
| P0[0]–P0[7] | General-purpose I/O port | Configurable TTL/Schmitt inputs; drive strength up to 25 mA; interrupt-on-change capable |
| P1[0]–P1[3] | General-purpose I/O port | Same electrical characteristics as P0; supports analog input/output when assigned to analog blocks |
| SWD | Serial Wire Debug interface | Two-wire debug channel used by PSoC Designer for programming and real-time debugging |
Key Features
| Feature | Design Value |
|---|---|
| Configurable Analog Array | 12 independent analog blocks enable mixed-signal system integration without external op-amps or ADCs |
| GUI-Based Peripheral Configuration | PSoC Designer software provides drag-and-drop placement of pre-verified User Modules (e.g., LCD controllers, filters) |
| In-System Serial Programming | ISSP™ allows field firmware updates without removing device from PCB |
| Flexible Clock Sources | Internal 24/48 MHz oscillator eliminates need for external crystal in cost-sensitive designs |
| EEPROM Emulation | 2,304 bytes of nonvolatile storage implemented in Flash with wear-leveling for parameter retention |
Applications
| Industrial Sensor Interface | Motor Control Feedback Module |
|---|---|
Use Scenario: Condition monitoring of temperature, pressure, and current in factory automation nodes. IC Role / Device Role / Timing Role: Configurable analog blocks condition sensor signals; digital blocks implement PWM-driven actuator control and UART telemetry. Use Value: Single-chip integration reduces BOM count and PCB area versus discrete MCU + ADC + op-amp solution. | Use Scenario: Closed-loop speed regulation in BLDC motor drives using hall-effect feedback. IC Role / Device Role / Timing Role: Incremental ADC digitizes hall sensor outputs; digital timers generate precise PWM with deadband for gate drivers. Use Value: On-chip analog front-end eliminates external signal conditioning, improving noise immunity and thermal stability. |
| Programmable Power Supply Monitor | Legacy Industrial Controller Upgrade |
Use Scenario: Real-time voltage/current supervision in DIN-rail mounted power supplies. IC Role / Device Role / Timing Role: Delta-Sigma ADC measures rail voltages; low-voltage detection circuit triggers fault response within 1 µs. Use Value: Internal voltage reference and programmable thresholds eliminate external supervisor ICs and trim components. | Use Scenario: Retrofitting aging PLC I/O modules with enhanced diagnostics and communication. IC Role / Device Role / Timing Role: SPI slave interface connects to host controller; SRAM buffers diagnostic logs; Flash stores configuration profiles. Use Value: ISSP™ enables field firmware updates to add new protocols or calibration algorithms without hardware change. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar programmable mixed-signal controller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CY8C27443-24PVXI | 16 KB Flash, 512 bytes SRAM, enhanced analog routing, silicon revision D vs. original C | Supports larger firmware images and more complex analog signal chains | Preferred for new designs requiring extended memory or improved analog performance |
| CY8C26443-24PVXI | 16 KB Flash, same 256 bytes SRAM, additional digital blocks (12 vs. 8), identical analog array | Better suited for designs needing multiple concurrent UART/SPI interfaces or advanced timer configurations | Select when digital peripheral count-not analog capability-is the limiting factor |
Compared with CY8C26233-24PVXI, CY8C27443 offers higher memory and updated silicon, while CY8C26443 adds digital resources without increasing analog capacity-making each suitable where their respective resource ceilings align with system requirements.
Availability
CY8C26233-24PVXI is available at Aetrix Electronics and suitable for industrial sensor interface, motor control feedback, and programmable power supply monitor applications requiring stable component supply across long-lifecycle embedded programs.
Supply support for CY8C26233-24PVXI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Cypress Semiconductor (now part of Infineon Technologies) designs high-performance, configurable mixed-signal ICs for embedded control and connectivity applications.
CY8C26233 belongs to the PSoC™ 1 family, engineered to replace discrete analog/digital components with a single programmable chip for cost-sensitive, medium-complexity industrial and consumer systems.
FAQ
Is CY8C26233-24PVXI still recommended for new designs?
No. Cypress explicitly labels this device "Not Recommended for New Designs" in Rev. *C documentation, directing users to CY8C27xxx series for enhanced Flash, SRAM, and analog routing. Legacy design support and obsolescence mitigation remain available through Aetrix Electronics' long-term supply program.
What development tools are required to program CY8C26233-24PVXI?
PSoC Designer IDE (v5.4 or earlier) is mandatory; it provides graphical peripheral configuration, code generation, and ISSP™ programming via MiniProg1 or compatible programmers. No third-party toolchains support the M8C core or PSoC 1 architecture.
Does CY8C26233-24PVXI support USB or CAN interfaces?
No. This device lacks native USB or CAN transceivers or protocol stacks. Communication is limited to UART, SPI, and I²C (via GPIO bit-banging only). External PHYs or bridge ICs are required for USB/CAN connectivity.
Can analog blocks be used simultaneously with digital blocks?
Yes. The PSoC 1 architecture allows concurrent operation: analog blocks process sensor signals while digital blocks execute PWM timing or UART transmission. Resource conflicts are resolved at compile time in PSoC Designer based on routing constraints and clock domain assignments.
CY8C26233-24PVXI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 20-SSOP (0.209", 5.30mm Width)
- Series:
- PSOC™1 CY8C26xxx
- Packaging:
- Tube
- Product Status:
- Obsolete
- Programmable:
- Verified
- Core Processor:
- M8C
- Core Size:
- 8-Bit
- Speed:
- 24MHz
- Connectivity:
- SPI, UART/USART
- Peripherals:
- LVD, POR, PWM, WDT
- Number of I/O:
- 16
- Program Memory Size:
- 8KB (8K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 256 x 8
- Voltage - Supply (Vcc/Vdd):
- 3V ~ 5.25V
- Data Converters:
- A/D 1x8b, 1x11b, 1x12b; D/A 1x9b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY8C26233-24PVXI FAQ
1.How can I place an order for CY8C26233-24PVXI through Aetrix?
Please submit a Request for Quotation (RFQ) for CY8C26233-24PVXI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY8C26233-24PVXI reliable?
The price and inventory of CY8C26233-24PVXI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY8C26233-24PVXI is usually 5 days.
3.What payment methods are accepted for CY8C26233-24PVXI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY8C26233-24PVXI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY8C26233-24PVXI?
CY8C26233-24PVXI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY8C26233-24PVXI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY8C26233-24PVXI?
For technical support, including CY8C26233-24PVXI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY8C26233-24PVXI requirements.
6.How does Aetrix verify that CY8C26233-24PVXI is sourced from the original manufacturer or authorized distributors?
All CY8C26233-24PVXI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY8C26233-24PVXI meets industry standards.
7.What is the process for return or replacement of CY8C26233-24PVXI?
All CY8C26233-24PVXI units undergo pre-shipment inspection (PSI). If there is an issue with CY8C26233-24PVXI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY8C26233-24PVXI part is unused and in its original packaging.
Return procedure for CY8C26233-24PVXI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY8C26233-24PVXI Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
