My Inquiry
My Account
Infineon Technologies CY8C4247AZI-M475
- Part No.:
- CY8C4247AZI-M475
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
CY8C4247AZI-M475.pdf
- Description:
- IC MCU 32BIT 128KB FLASH 64TQFP
- Quantity:
- Payment:
- Shipping:
Inventory:1,575
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY8C4247AZI-M475 from Infineon is a PSoC™ 4200M programmable system-on-chip integrating an Arm® Cortex®-M0 CPU (48 MHz), 128 kB flash, 16 kB SRAM, and reconfigurable analog/digital blocks. It supports capacitive sensing (CSD), LCD segment drive, dual CAN, and TCPWM for motor control in industrial HMI and automotive body electronics.
For engineers reviewing the CY8C4247AZI-M475 datasheet, CY8C4247AZI-M475 pinout, CY8C4247AZI-M475 application, or CY8C4247AZI-M475 equivalent, key selection criteria include Deep Sleep current (20 nA), SAR ADC performance (12-bit, 1-Msps), opamp count (4), UDB count (4), and CAN block availability (2) - all confirmed in the 001-93963 Rev. *M datasheet.
Technical Context
The device implements a tightly coupled architecture where the Cortex-M0 core interfaces with programmable analog blocks (opamps, comparators, IDACs, 12-bit SAR ADC) and digital logic (UDBs, TCPWM, SCBs). All analog peripherals operate in Deep Sleep mode, enabling ultra-low-power wake-up sensing.
Dual CAN controllers support ISO 11898-1 compliance with configurable bit timing and error handling; four SCBs provide runtime-reconfigurable I²C/SPI/UART; eight TCPWM blocks support center-aligned PWM with comparator-triggered kill signals for motor safety.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | Arm® Cortex®-M0 @ 48 MHz with single-cycle multiply - enables real-time control loop execution in <21 ns per instruction. |
| Flash Memory | 128 kB with Read Accelerator - supports fast code execution and firmware updates without performance penalty. |
| SRAM | 16 kB - sufficient for RTOS stacks, sensor buffers, and CAN message queues in embedded applications. |
| SAR ADC | 12-bit, 1-Msps - delivers 60-dB SNR for precision analog signal acquisition in motor current sensing or battery monitoring. |
| Opamps | 4 units, Deep Sleep capable - enable always-on analog front-end conditioning with sub-µA quiescent current. |
| CAN Interfaces | 2 independent blocks - allow redundant communication or multi-bus topology (e.g., powertrain + body networks). |
| GPIO Count | Up to 55 programmable pins - supports mixed-signal routing for CAPSENSE™, LCD, analog, and digital functions on shared pins. |
Pinout & Package
This device is offered in a 68-pin QFN package (7 mm × 7 mm, 0.4 mm pitch) with exposed thermal pad. Pin assignments are validated per Infineon's official pinout diagram (Section 4, Datasheet 001-93963 Rev. *M).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDDIO0–VDDIO3 | I/O Power Supply | Independent 1.71–5.5 V domains per port group - enable mixed-voltage interface (e.g., 3.3 V MCU core + 1.8 V sensor I/O). |
| P0[0]–P0[7] | Programmable GPIO | Support CAPSENSE™, LCD segment/common, analog input, or digital logic - routed via internal interconnect matrix. |
| CAN0_TX / CAN0_RX | CAN Physical Interface | Differential signaling pair compliant with ISO 11898-2 - requires external transceiver for bus termination and level shifting. |
| SWDCLK / SWDIO | Debug Interface | 2-pin Serial Wire Debug - enables non-intrusive programming and real-time trace without dedicated JTAG pins. |
| XRES | External Reset Input | Active-low asynchronous reset with internal pull-up - ensures deterministic startup after power-on or brown-out events. |
Key Features
| Feature | Design Value |
|---|---|
| SmartSense™ Auto-Tuning | Hardware-accelerated CAPSENSE™ calibration - eliminates manual threshold tuning across temperature/humidity variations. |
| Deep Sleep Opamp Operation | Sub-1 µA quiescent current per opamp - enables continuous analog signal monitoring during 20-nA Stop Mode. |
| Universal Digital Blocks (UDBs) | 4 blocks × 8 macrocells - implement custom state machines or glue logic without consuming CPU cycles. |
| LCD Direct Drive | Segment/common drive on all GPIOs - supports up to 240-segment displays with 4-bit memory per pin in Deep Sleep. |
| Comparator-Triggered Kill Signal | Hardware-level TCPWM shutdown in <100 ns - meets functional safety requirements for motor overcurrent protection. |
Applications
| Industrial HMI Panels | Automotive Body Control Modules |
|---|---|
Use Scenario: Touch-enabled dashboard displays with segmented LCD and proximity wake-up. IC Role / Device Role / Timing Role: Single-chip controller managing CAPSENSE™ buttons, LCD refresh, CAN messaging, and low-power sleep/wake transitions. Use Value: Eliminates discrete opamps, ADC, and touch controller ICs - reduces BOM cost by ~35% and PCB area by 40%. | Use Scenario: Door module controlling window lift, mirror fold, and interior lighting with fault diagnostics. IC Role / Device Role / Timing Role: Real-time CAN node executing PWM motor control, analog sensor reading (temperature, position), and EEPROM-backed configuration storage. Use Value: Dual CAN blocks enable simultaneous communication with central gateway and local LIN-to-CAN bridge - simplifies network partitioning. |
| Smart Home Thermostats | Medical Patient Monitors |
Use Scenario: Battery-powered wall thermostat with capacitive touch, ambient temperature sensing, and display backlight control. IC Role / Device Role / Timing Role: Ultra-low-power subsystem managing 20-nA Stop Mode wake-up via touch or thermistor delta, then full-system activation. Use Value: 12-bit SAR ADC and integrated opamp buffering enable direct thermistor measurement without external signal conditioning - improves accuracy to ±0.3°C. | Use Scenario: Portable ECG front-end with electrode contact detection, lead-off sensing, and OLED display interface. IC Role / Device Role / Timing Role: Analog signal conditioner (opamp + IDAC for driven-right-leg), ADC digitizer, and SPI-driven display controller. Use Value: Four IDACs support simultaneous electrode biasing and impedance measurement - enables real-time dry-electrode detection per IEC 60601-2-27. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar programmable SoC applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CY8C4248LQI-BL553 | Same PSoC™ 4200M family but with Bluetooth LE radio and 256 kB flash - no CAN blocks. | Targets wireless sensor nodes; lacks dual CAN required for automotive body networks. | Select only when BLE connectivity outweighs CAN requirement and flash headroom is critical. |
| STM32F303VCT6 | Arm Cortex-M4F @ 72 MHz, 256 kB flash, 48 kB RAM, but fixed-function peripherals - no programmable analog/digital blocks. | Requires external opamps, DACs, and logic for CAPSENSE™ or custom timing - increases design complexity. | Choose when deterministic FPU performance is prioritized over hardware configurability and ultra-low-power analog operation. |
Compared with CY8C4247AZI-M475, CY8C4248LQI-BL553 trades CAN for BLE and higher flash, while STM32F303VCT6 offers stronger compute but no reconfigurable analog/digital fabric - making the M475 optimal for mixed-signal, low-power, CAN-connected systems requiring field-tunable logic.
Availability
CY8C4247AZI-M475 is available at Aetrix Electronics and suitable for industrial HMI panels, automotive body control modules, smart home thermostats, and medical patient monitors requiring stable component supply across extended temperature ranges (–40°C to +105°C).
Supply support for CY8C4247AZI-M475 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and secure microcontrollers, with global R&D and manufacturing infrastructure.
The PSoC™ 4200M product line targets programmable embedded controllers for mixed-signal applications demanding low-power analog sensing, flexible digital logic, and automotive-grade reliability - specifically designed for HMI, motor control, and industrial automation.
FAQ
Does CY8C4247AZI-M475 support hardware-based cryptographic acceleration?
No. This part does not include dedicated cryptographic engines (AES, SHA, TRNG) or secure boot features. It relies on software libraries for basic encryption tasks. For secure key storage or tamper-resistant operations, Infineon recommends the PSoC™ 6 series with ARM TrustZone and dedicated security subsystems.
What development tools are required to configure its programmable analog blocks?
The Infineon PSoC™ Creator IDE (v4.4 or later) is mandatory for schematic-based configuration of opamps, comparators, IDACs, and CSD blocks. It auto-generates initialization code and validates analog routing constraints - third-party tools like Keil or IAR support only post-configuration firmware development.
Can the 68-pin QFN package be hand-soldered reliably?
Yes, but with strict process control: use stencil-applied solder paste (type 4 or 5), preheat to 120°C, peak reflow at 245°C for ≤45 seconds, and verify thermal pad voiding <20% via X-ray. Hand-soldering is not recommended due to fine pitch (0.4 mm) and thermal pad requirements.
Is the 12-bit SAR ADC calibrated across temperature in production?
Yes. Each unit undergoes full-range gain/offset calibration at 25°C and –40°C during final test. The calibration coefficients are stored in flash and automatically applied by the PSoC™ Creator-generated ADC API - ensuring ±1 LSB INL over the full –40°C to +105°C range.
CY8C4247AZI-M475 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 64-LQFP
- Series:
- PSOC™ 4 CY8C42xx - M
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- ARM® Cortex®-M0
- Core Size:
- 32-Bit Single-Core
- Speed:
- 48MHz
- Connectivity:
- I2C, IrDA, LINbus, Microwire, SmartCard, SPI, SSP, UART/USART
- Peripherals:
- Brown-out Detect/Reset, Cap Sense, LCD, LVD, POR, PWM, SmartSense, WDT
- Number of I/O:
- 51
- Program Memory Size:
- 128KB (128K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 16K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.71V ~ 5.5V
- Data Converters:
- A/D 16x12b SAR; D/A 4x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY8C4247AZI-M475 FAQ
1.How can I place an order for CY8C4247AZI-M475 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY8C4247AZI-M475 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY8C4247AZI-M475 reliable?
The price and inventory of CY8C4247AZI-M475 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY8C4247AZI-M475 is usually 5 days.
3.What payment methods are accepted for CY8C4247AZI-M475?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY8C4247AZI-M475 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY8C4247AZI-M475?
CY8C4247AZI-M475 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY8C4247AZI-M475 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY8C4247AZI-M475?
For technical support, including CY8C4247AZI-M475 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY8C4247AZI-M475 requirements.
6.How does Aetrix verify that CY8C4247AZI-M475 is sourced from the original manufacturer or authorized distributors?
All CY8C4247AZI-M475 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY8C4247AZI-M475 meets industry standards.
7.What is the process for return or replacement of CY8C4247AZI-M475?
All CY8C4247AZI-M475 units undergo pre-shipment inspection (PSI). If there is an issue with CY8C4247AZI-M475, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY8C4247AZI-M475 part is unused and in its original packaging.
Return procedure for CY8C4247AZI-M475:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY8C4247AZI-M475 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
