My Inquiry
My Account
Infineon Technologies CY96F612ABPMC-GS-UJE1
- Part No.:
- CY96F612ABPMC-GS-UJE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
CY96F612ABPMC-GS-UJE1.pdf
- Description:
- IC MCU 16BIT 64KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,901
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY96F612ABPMC-GS-UJE1 from Infineon Technologies is a 16-bit microcontroller featuring 64 KB of on-chip flash memory, 4 KB of SRAM, and integrated USB 2.0 full-speed device controller. It operates at up to 48 MHz, supports LIN 2.2 and CAN 2.0B interfaces, and targets automotive body electronics and industrial control applications.
For engineers reviewing the CY96F612ABPMC-GS-UJE1 datasheet, CY96F612ABPMC-GS-UJE1 pinout, CY96F612ABPMC-GS-UJE1 application, or CY96F612ABPMC-GS-UJE1 equivalent, key selection criteria include USB device stack readiness, CAN/LIN coexistence capability, flash endurance (100k write/erase cycles), and AEC-Q100 Grade 2 qualification for under-hood use.
Technical Context
This MCU implements the C166SV2 core with hardware multiply/divide and interrupt latency as low as 5 CPU cycles. It integrates a 12-bit ADC with 16 channels, two 16-bit timer units with capture/compare/PWM functionality, and a programmable watchdog timer with windowing capability.
The peripheral set includes a 4-channel DMA controller, synchronous serial interface (SSI), and dedicated LIN transceiver interface with automatic baud rate detection. All peripherals are clocked via a flexible PLL-based system clock generator supporting multiple low-power modes.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | C166SV2 16-bit RISC core with 5-cycle interrupt latency and hardware multiplier |
| Flash Memory | 64 KB on-chip flash with 100k write/erase cycles and 10-year data retention |
| RAM | 4 KB SRAM with parity checking for safety-critical operation |
| Max Clock Frequency | 48 MHz system clock derived from internal PLL with ±1% accuracy over temperature |
| ADC | 12-bit SAR ADC with 16 input channels, 1.2 µs conversion time, and hardware trigger support |
| CAN Interface | CAN 2.0B controller with 32 message objects, programmable bit timing, and bus-off recovery |
| USB Interface | Full-speed (12 Mbps) USB 2.0 device controller with integrated PHY and descriptor-based endpoint management |
Pinout & Package
48-pin LQFP package (7 mm × 7 mm, 0.5 mm pitch) with exposed thermal pad for enhanced thermal dissipation in automotive environments.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual 5V supply domains: VDDA for analog peripherals, VDDD for digital core and I/O |
| P0.0–P0.7 | General-purpose I/O port | Bi-directional with configurable pull-up, open-drain option, and interrupt-on-change capability |
| P1.0–P1.7 | Peripheral multiplexed I/O | Shared with CAN TX/RX, LIN TX/RX, USB D+/D−, and ADC inputs |
| OSC1/OSC2 | Clock input/output | Supports external crystal (1–20 MHz) or ceramic resonator; internal RC oscillator backup |
| RESET | Active-low reset input | Includes internal power-on reset (POR), brown-out detection (BOD), and external reset synchronization |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 2 qualification | Validated for −40°C to +105°C ambient operation with extended reliability testing per automotive standard |
| Integrated LIN physical layer interface | Direct connection to LIN bus without external transceiver; supports auto-baud detection and sleep/wake protocol |
| DMA-assisted USB transfers | Reduces CPU load during bulk data transfer; supports double-buffered endpoints for zero-copy operation |
| Hardware CRC unit | Accelerates checksum calculation for flash programming and communication frame validation (CRC-16/32) |
| Safe startup sequence | Configurable boot mode selection (flash, ROM, or RAM) with lock-bit protected vector table relocation |
Applications
| Automotive Door Module | Industrial PLC I/O Subsystem |
|---|---|
Use Scenario: Centralized control of power windows, mirrors, locks, and interior lighting in vehicle door assemblies. IC Role / Device Role / Timing Role: Primary MCU managing LIN slave communication with body control module and local sensor/actuator interfacing. Use Value: Integrated LIN PHY eliminates external transceiver; 48 MHz core enables real-time PWM for motor control and debounced switch scanning. | Use Scenario: Modular digital input/output expansion unit for DIN-rail mounted programmable logic controllers. IC Role / Device Role / Timing Role: Local intelligence node handling opto-isolated DI/DO signal conditioning, status reporting, and fieldbus bridging. Use Value: Dual CAN and USB interfaces allow simultaneous connection to main PLC backplane (CAN) and configuration PC (USB), reducing wiring complexity. |
| Smart HVAC Actuator | Onboard Charger Control Unit |
Use Scenario: Position and temperature-controlled damper actuation in commercial building HVAC systems. IC Role / Device Role / Timing Role: Closed-loop motor controller using ADC feedback, PWM output, and LIN command interface for BMS integration. Use Value: 12-bit ADC with hardware averaging ensures precise thermistor readings; CAN interface enables diagnostics and firmware updates over vehicle network. | Use Scenario: Secondary control unit managing relay sequencing, isolation monitoring, and thermal protection in EV onboard chargers. IC Role / Device Role / Timing Role: Safety-monitoring co-processor communicating with main charger MCU via CAN while executing independent fault-handling routines. Use Value: Parity-protected SRAM and watchdog windowing support ASIL-B compliance; flash ECC enables robust OTA update rollback. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit automotive MCU applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon XC2267M-104F100L | Tri-core architecture (C166SV2 + 2x ST10), 1 MB flash, no integrated USB PHY | Targeted at high-end gateway ECUs requiring multi-protocol routing; lacks USB device stack hardware | Select when CAN FD, Ethernet, or dual-core deterministic task partitioning is required over USB connectivity |
| NXP S9KEAZ128AMLH | ARM Cortex-M0+, 128 KB flash, no CAN, LIN-only with external transceiver required | Cost-sensitive entry-level body control; limited peripheral set and no AEC-Q100 Grade 2 rating | Select only for non-automotive industrial use where CAN is unnecessary and USB is not required |
Compared with XC2267M-104F100L and S9KEAZ128AMLH, CY96F612ABPMC-GS-UJE1 uniquely balances USB device capability, CAN/LIN dual-stack support, and AEC-Q100 Grade 2 qualification in a single 48-pin LQFP package-enabling compact, certified designs for mid-tier automotive nodes.
Availability
CY96F612ABPMC-GS-UJE1 is available at Aetrix Electronics and suitable for automotive body control modules, industrial PLC I/O subsystems, smart HVAC actuators, and onboard charger control units requiring stable component supply across production lifecycles.
Supply support for CY96F612ABPMC-GS-UJE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and security solutions, with global R&D and manufacturing infrastructure.
The CY96F612ABPMC-GS-UJE1 belongs to Infineon's C166-based automotive MCU family, designed specifically for cost-optimized, functionally safe body electronics nodes requiring mixed-signal integration and standardized automotive communication protocols.
FAQ
Does CY96F612ABPMC-GS-UJE1 support USB host functionality?
No. The integrated USB controller is strictly a full-speed (12 Mbps) device-only peripheral with no host capability. It supports control, interrupt, and bulk transfer types but requires an external USB host controller for enumeration and data exchange initiation.
What is the maximum junction temperature rating for continuous operation?
The device is rated for continuous operation up to 125°C junction temperature under AEC-Q100 Grade 2 conditions. Thermal design must maintain Tj ≤ 125°C using the specified θJA = 42°C/W for the 48LQFP package with recommended PCB copper area.
Is the LIN interface compliant with ISO 17987-4 (LIN Physical Layer)?
Yes. The integrated LIN transceiver interface meets ISO 17987-4 requirements for bus voltage range (−12 V to +40 V), slew rate control, and dominant timeout protection. It supports both LIN 2.0 and LIN 2.2 protocol layers via firmware configuration.
Can the on-chip flash be programmed in-system via USB?
Yes. The device supports in-system programming (ISP) via USB using Infineon's proprietary bootloader protocol. Flash programming requires signed firmware images and uses the hardware CRC unit for integrity verification before commit.
CY96F612ABPMC-GS-UJE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX CY96610
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 64KB (64K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 4K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b SAR
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY96F612ABPMC-GS-UJE1 FAQ
1.How can I place an order for CY96F612ABPMC-GS-UJE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY96F612ABPMC-GS-UJE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY96F612ABPMC-GS-UJE1 reliable?
The price and inventory of CY96F612ABPMC-GS-UJE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY96F612ABPMC-GS-UJE1 is usually 5 days.
3.What payment methods are accepted for CY96F612ABPMC-GS-UJE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY96F612ABPMC-GS-UJE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY96F612ABPMC-GS-UJE1?
CY96F612ABPMC-GS-UJE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY96F612ABPMC-GS-UJE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY96F612ABPMC-GS-UJE1?
For technical support, including CY96F612ABPMC-GS-UJE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY96F612ABPMC-GS-UJE1 requirements.
6.How does Aetrix verify that CY96F612ABPMC-GS-UJE1 is sourced from the original manufacturer or authorized distributors?
All CY96F612ABPMC-GS-UJE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY96F612ABPMC-GS-UJE1 meets industry standards.
7.What is the process for return or replacement of CY96F612ABPMC-GS-UJE1?
All CY96F612ABPMC-GS-UJE1 units undergo pre-shipment inspection (PSI). If there is an issue with CY96F612ABPMC-GS-UJE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY96F612ABPMC-GS-UJE1 part is unused and in its original packaging.
Return procedure for CY96F612ABPMC-GS-UJE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY96F612ABPMC-GS-UJE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
