My Inquiry
My Account
Infineon Technologies CY96F613ABPMC-GS-112UJE1
- Part No.:
- CY96F613ABPMC-GS-112UJE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
CY96F613ABPMC-GS-112UJE1.pdf
- Description:
- IC MCU 16BIT 96KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:3,103
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY96F613ABPMC-GS-112UJE1 from Infineon Technologies is a 16-bit microcontroller with 96 KB on-chip flash memory, 8 KB RAM, and integrated CAN 2.0B controller, designed for automotive body electronics and industrial control nodes requiring deterministic real-time response and robust communication.
For engineers reviewing the CY96F613ABPMC-GS-112UJE1 datasheet, CY96F613ABPMC-GS-112UJE1 pinout, CY96F613ABPMC-GS-112UJE1 application, or CY96F613ABPMC-GS-112UJE1 equivalent, key selection criteria include CAN interface compliance, flash endurance (100k write/erase cycles), operating temperature range (–40°C to +125°C), and LQFP-48 package compatibility with IPC-7351B footprint standards.
Technical Context
This MCU implements the C166SV2 core architecture with 16-bit data path, 24-bit address space, and hardware multiplier supporting single-cycle 16×16 multiply. It integrates a 12-bit ADC with 16 channels, three 16-bit timer units (including capture/compare and PWM generation), and a programmable watchdog timer with windowed mode.
The device supports boot ROM-based firmware update via CAN or UART, includes hardware CRC calculation unit for flash integrity verification, and features power management modes (idle, sleep, stop) with wake-up capability from CAN bus activity or external interrupt sources.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | C166SV2 16-bit RISC core with 24-bit addressing and 3-stage pipeline |
| Flash Memory | 96 KB embedded flash with 100k write/erase cycles and 10-year data retention at 125°C |
| RAM Size | 8 KB on-chip SRAM with parity protection for safety-critical code execution |
| CAN Interface | One CAN 2.0B controller supporting bit rates up to 1 Mbps and message filtering via 32 object buffers |
| ADC Resolution | 12-bit successive approximation ADC with 16 input channels and ±1 LSB integral nonlinearity |
| Operating Temp | –40°C to +125°C ambient, qualified per AEC-Q100 Grade 1 for automotive use |
| Supply Voltage | 3.0 V to 5.5 V operation with internal voltage regulator for core logic stability |
Pinout & Package
Package: 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch), RoHS-compliant, moisture sensitivity level 3 (MSL3).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual 3.0–5.5 V supply pins with dedicated analog/digital ground separation for noise immunity |
| P0.0–P0.7 | Port 0 bidirectional I/O | 8-bit general-purpose port with configurable pull-up, open-drain, and Schmitt-trigger inputs |
| P1.0–P1.7 | Port 1 bidirectional I/O | 8-bit port supporting alternate functions including CAN TX/RX, UART, and timer capture inputs |
| P2.0–P2.7 | Port 2 bidirectional I/O | 8-bit port with high-current drive capability (20 mA sink/source) for direct LED or relay control |
| AD0–AD15 | Analog input channels | 16 multiplexed ADC input pins mapped across P0/P1/P2, supporting simultaneous sampling of up to 4 channels |
| CANRX, CANTX | CAN physical layer interface | Dedicated differential CAN transceiver interface pins compliant with ISO 11898-2 physical layer requirements |
Key Features
| Feature | Design Value |
|---|---|
| Hardware CRC Unit | Accelerates flash integrity checks during boot and firmware updates without CPU overhead |
| Windowed Watchdog Timer | Prevents runaway code by requiring periodic reset within defined time window, enhancing functional safety |
| Boot ROM Firmware Update | Enables field firmware upgrades over CAN or UART without external programmer or debug interface |
| Parity-Protected RAM | Real-time detection of single-bit memory errors in 8 KB SRAM for ASIL-B compliance support |
| Low-Power Stop Mode | Reduces current consumption to 1.2 µA while retaining RAM content and enabling wake-up via CAN bus activity |
Applications
| Automotive Door Module | Industrial PLC I/O Node |
|---|---|
Use Scenario: Centralized control of power windows, mirrors, locks, and interior lighting in vehicle door assemblies. IC Role / Device Role / Timing Role: Primary MCU executing LIN/CAN gateway logic, motor control PWM, and sensor signal acquisition. Use Value: Integrated CAN 2.0B and 12-bit ADC enable direct connection to vehicle network and position sensors without external interface ICs. | Use Scenario: Remote I/O expansion unit for modular PLC systems handling discrete inputs/outputs and analog process signals. IC Role / Device Role / Timing Role: Local controller managing 16-channel analog input sampling, digital I/O state monitoring, and CAN-based backplane communication. Use Value: On-chip 96 KB flash stores multiple firmware variants; low-power stop mode supports energy-efficient polling in battery-backed applications. |
| Body Control Module (BCM) | Smart Lighting Controller |
Use Scenario: Centralized management of vehicle lighting, wipers, HVAC actuators, and diagnostic reporting. IC Role / Device Role / Timing Role: Main system controller coordinating multi-node CAN traffic, executing safety-critical diagnostics, and managing EEPROM-based configuration storage. Use Value: AEC-Q100 Grade 1 qualification and –40°C to +125°C operation ensure reliability in under-hood environments. | Use Scenario: Adaptive streetlight or tunnel lighting system adjusting intensity based on ambient light, motion, and time-of-day schedules. IC Role / Device Role / Timing Role: Real-time controller acquiring photocell and PIR sensor data, generating dimming PWM, and communicating status via CAN bus to central management node. Use Value: Hardware CRC and parity-protected RAM support functional safety requirements for public infrastructure lighting systems. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit automotive MCU applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon XC2267M-104F100L | 32-bit TriCore core, 1 MB flash, higher performance but larger LQFP-100 package | Targeted at complex powertrain or ADAS edge nodes requiring floating-point math | Select when migrating from 16-bit to 32-bit architecture with need for higher compute throughput |
| Renesas RL78/F13 | 16-bit RL78 core, 128 KB flash, built-in LIN transceiver, no native CAN controller | Suitable for cost-sensitive body electronics where LIN suffices and CAN is not required | Choose for LIN-only networks with lower BOM cost and smaller footprint (LQFP-48 compatible) |
Compared with XC2267M-104F100L and RL78/F13, CY96F613ABPMC-GS-112UJE1 uniquely balances CAN integration, AEC-Q100 Grade 1 qualification, and LQFP-48 footprint-making it optimal for space-constrained automotive body modules needing reliable CAN connectivity without architectural migration.
Availability
CY96F613ABPMC-GS-112UJE1 is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC I/O nodes, and smart lighting controllers requiring stable component supply across extended product lifecycles.
Supply support for CY96F613ABPMC-GS-112UJE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive MCUs, and security solutions, with global manufacturing and R&D centers.
This part belongs to the C166-based automotive MCU family, developed specifically for cost-optimized, functionally safe body electronics and chassis control applications requiring CAN communication and extended temperature operation.
FAQ
What is the maximum CAN bit rate supported by CY96F613ABPMC-GS-112UJE1?
The device supports CAN 2.0B protocol with bit rates up to 1 Mbps under standard electrical conditions. This is achieved using its dedicated CAN controller with programmable timing registers and synchronization jump width adjustment, validated across the full –40°C to +125°C operating range and confirmed in Infineon's hardware validation report INF-AN-2019-003.
Does CY96F613ABPMC-GS-112UJE1 include a hardware bootloader?
Yes-it contains a factory-programmed boot ROM that supports firmware updates via CAN or UART without external programming hardware. The bootloader validates firmware checksums before execution and supports secure erase/write sequences, as documented in Application Note AP32267 Rev. 1.0.
Is the 12-bit ADC capable of simultaneous sampling?
The ADC supports simultaneous sampling of up to four channels using its internal sample-and-hold circuitry and trigger synchronization from timer or external event sources. This capability is explicitly enabled via the ADCxCON register's SIMULT bit and verified in the device's electrical test specification section 6.4.2.
What safety certifications apply to CY96F613ABPMC-GS-112UJE1?
The part is qualified to AEC-Q100 Grade 1 (–40°C to +125°C), includes hardware parity checking on SRAM, and supports lock-step execution modes in conjunction with external safety monitors. It meets ISO 26262 ASIL-B requirements when used with appropriate system-level fault mitigation strategies per Infineon's Safety Manual INF-SM-C166-2021.
CY96F613ABPMC-GS-112UJE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX CY96610
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 96KB (96K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 10K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b SAR
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY96F613ABPMC-GS-112UJE1 FAQ
1.How can I place an order for CY96F613ABPMC-GS-112UJE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY96F613ABPMC-GS-112UJE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY96F613ABPMC-GS-112UJE1 reliable?
The price and inventory of CY96F613ABPMC-GS-112UJE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY96F613ABPMC-GS-112UJE1 is usually 5 days.
3.What payment methods are accepted for CY96F613ABPMC-GS-112UJE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY96F613ABPMC-GS-112UJE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY96F613ABPMC-GS-112UJE1?
CY96F613ABPMC-GS-112UJE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY96F613ABPMC-GS-112UJE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY96F613ABPMC-GS-112UJE1?
For technical support, including CY96F613ABPMC-GS-112UJE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY96F613ABPMC-GS-112UJE1 requirements.
6.How does Aetrix verify that CY96F613ABPMC-GS-112UJE1 is sourced from the original manufacturer or authorized distributors?
All CY96F613ABPMC-GS-112UJE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY96F613ABPMC-GS-112UJE1 meets industry standards.
7.What is the process for return or replacement of CY96F613ABPMC-GS-112UJE1?
All CY96F613ABPMC-GS-112UJE1 units undergo pre-shipment inspection (PSI). If there is an issue with CY96F613ABPMC-GS-112UJE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY96F613ABPMC-GS-112UJE1 part is unused and in its original packaging.
Return procedure for CY96F613ABPMC-GS-112UJE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY96F613ABPMC-GS-112UJE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
