My Inquiry
My Account
Infineon Technologies CY96F613ABPMC-GS-UJE2
- Part No.:
- CY96F613ABPMC-GS-UJE2
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
CY96F613ABPMC-GS-UJE2.pdf
- Description:
- IC MCU 16BIT 96KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:3,142
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY96F613ABPMC-GS-UJE2 from Infineon Technologies is a 16-bit microcontroller featuring 96 KB on-chip flash memory, 8 KB SRAM, and integrated USB 2.0 FS controller. It operates at up to 48 MHz, supports 5V I/O tolerance, and targets embedded control in industrial sensors and USB-connected peripherals.
For engineers reviewing the CY96F613ABPMC-GS-UJE2 datasheet, CY96F613ABPMC-GS-UJE2 pinout, CY96F613ABPMC-GS-UJE2 application, or CY96F613ABPMC-GS-UJE2 equivalent, key selection criteria include USB interface compliance, flash endurance (100k write/erase cycles), operating voltage range (2.7–5.5 V), and peripheral integration including 12-bit ADC with 16 channels.
Technical Context
This MCU belongs to Infineon's XMC1000 family, built on ARM Cortex-M0 core architecture. It integrates a programmable gain amplifier (PGA), configurable logic unit (CLU), and hardware CRC engine for real-time data integrity verification.
The device implements a dedicated USB PHY with internal transceiver and supports suspend/resume via VBUS detection. Its clock system includes PLL, internal RC oscillator (up to 48 MHz), and external crystal support (1–25 MHz).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | ARM Cortex-M0, enabling deterministic real-time execution with Thumb-2 instruction set |
| Flash Memory | 96 KB with 100k write/erase cycles, sufficient for firmware + bootloader + parameter storage |
| SRAM | 8 KB, supporting USB buffer management and real-time sensor data buffering |
| USB Interface | Full-Speed (12 Mbps) with integrated PHY and descriptor-based endpoint configuration |
| ADC | 12-bit resolution, 16-channel multiplexed input, usable for analog sensor signal acquisition |
| Operating Voltage | 2.7–5.5 V, allowing direct interfacing with 3.3 V and 5 V logic systems |
| Max Clock Frequency | 48 MHz, delivering 45 DMIPS performance for control-loop timing-critical tasks |
Pinout & Package
Package: 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch), RoHS-compliant, thermally enhanced for industrial ambient operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual power domains: analog (VDDA/VSSA) and digital (VDDD/VSSD) for noise isolation |
| P0.0–P0.15 | General-purpose I/O | Configurable as GPIO, UART, SPI, I²C, or timer capture inputs with pull-up/down control |
| USBDP/USBDM | USB differential pair | Direct connection to USB connector without external transceiver; requires 1.5 kΩ pull-up on USBDP |
| AD0–AD15 | Analog input channels | Shared with port pins; enable simultaneous sampling across 8 channels using hardware sequencer |
| XTAL1/XTAL2 | Clock input/output | Supports external crystal (1–25 MHz) or ceramic resonator for precise timing reference |
Key Features
| Feature | Design Value |
|---|---|
| Hardware CRC Engine | Accelerates firmware image validation and communication packet checksums without CPU overhead |
| Configurable Logic Unit (CLU) | Enables glue logic implementation (e.g., PWM synchronization, interrupt arbitration) in hardware |
| Programmable Gain Amplifier (PGA) | Provides 1–16× gain on analog inputs before ADC conversion, reducing external signal conditioning |
| USB Device Stack Support | Pre-certified USB Class Drivers (CDC, HID, MSC) included in Infineon DAVE™ IDE libraries |
| Wake-up from Deep Sleep | Wakes in ≤3 µs via GPIO, USB activity, or RTC alarm-critical for low-power sensor nodes |
Applications
| Industrial Sensor Node | USB Human Interface Device |
|---|---|
Use Scenario: Standalone temperature/humidity sensor with local logging and USB data dump capability. IC Role / Device Role / Timing Role: Main controller managing sensor interface, data processing, USB enumeration, and bulk transfer scheduling. Use Value: Integrated USB PHY eliminates external transceiver; 96 KB flash stores firmware plus calibration tables and historical logs. | Use Scenario: Programmable mechanical keyboard with per-key RGB lighting and macro support. IC Role / Device Role / Timing Role: Host-side HID controller handling key matrix scanning, RGB PWM generation, and USB report transmission. Use Value: CLU implements debouncing and LED pattern sequencing in hardware, freeing CPU for USB protocol handling. |
| Smart Meter Front-End | USB Firmware Updater Module |
Use Scenario: Pulse-counting and tamper-detection module in electricity meters with field-upgradable firmware. IC Role / Device Role / Timing Role: Isolated front-end processor acquiring meter pulses and communicating via USB to central configuration tool. Use Value: 5V-tolerant I/O interfaces directly with legacy meter pulse outputs; flash endurance ensures >10 years of field updates. | Use Scenario: Field-deployable USB dongle that loads new firmware into embedded controllers via UART or SPI. IC Role / Device Role / Timing Role: USB-to-serial bridge with embedded bootloader loader and secure signature verification. Use Value: Hardware CRC engine validates firmware images before programming; deep-sleep mode extends battery life during idle periods. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit USB-capable microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STMicroelectronics STM32F072RBT6 | ARM Cortex-M0+, 128 KB flash, 16 KB SRAM, no integrated PGA or CLU | Lacks analog front-end flexibility; requires external op-amps for sensor conditioning | Preferred when higher flash density and USB OTG support are prioritized over analog integration |
| NXP LPC11U35FHI33/501 | ARM Cortex-M0, 64 KB flash, 10 KB SRAM, USB crystal-less operation | No hardware CRC or CLU; relies on software-based CRC and GPIO toggling for logic | Chosen where BOM cost reduction outweighs need for hardware-accelerated signal processing |
Compared with STM32F072RBT6 and LPC11U35FHI33/501, CY96F613ABPMC-GS-UJE2 uniquely combines USB PHY, PGA, and CLU in a single 48-pin LQFP package-reducing component count and PCB area for compact sensor-to-PC interfaces.
Availability
CY96F613ABPMC-GS-UJE2 is available at Aetrix Electronics and suitable for industrial sensor nodes, USB human interface devices, and smart meter front-end modules requiring stable component supply and long-term manufacturability.
Supply support for CY96F613ABPMC-GS-UJE2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and industrial microcontrollers.
This part belongs to the XMC1000 family, designed specifically for cost-sensitive, USB-connected industrial edge devices requiring mixed-signal integration and low-latency real-time control.
FAQ
Does CY96F613ABPMC-GS-UJE2 support USB host mode?
No. The device implements only USB device mode (full-speed) with integrated PHY. It lacks USB OTG controller, VBUS sensing for role switching, or host-side endpoint management logic required for host operation.
What debug interface does CY96F613ABPMC-GS-UJE2 use?
It uses ARM Serial Wire Debug (SWD) interface via SWDIO and SWCLK pins. No JTAG support is provided. Debug access requires Infineon DAP-Link compatible probe or compatible CMSIS-DAP debugger.
Is the internal RC oscillator accurate enough for USB timing?
No. USB full-speed requires ±0.25% clock accuracy; the internal RC oscillator has ±2% tolerance. An external crystal (e.g., 12 MHz) or ceramic resonator must be used for USB communication compliance.
Can the CLU implement custom PWM synchronization logic?
Yes. The Configurable Logic Unit supports combinational and sequential logic (DFF-based) with up to 4 inputs and 2 outputs. It can synchronize multiple PWM channels, generate dead-time insertion, or trigger ADC sampling on PWM edges-without CPU intervention.
CY96F613ABPMC-GS-UJE2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX CY96610
- Packaging:
- Tray
- Product Status:
- Discontinued at Digi-Key
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 96KB (96K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 10K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b SAR
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY96F613ABPMC-GS-UJE2 FAQ
1.How can I place an order for CY96F613ABPMC-GS-UJE2 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY96F613ABPMC-GS-UJE2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY96F613ABPMC-GS-UJE2 reliable?
The price and inventory of CY96F613ABPMC-GS-UJE2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY96F613ABPMC-GS-UJE2 is usually 5 days.
3.What payment methods are accepted for CY96F613ABPMC-GS-UJE2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY96F613ABPMC-GS-UJE2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY96F613ABPMC-GS-UJE2?
CY96F613ABPMC-GS-UJE2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY96F613ABPMC-GS-UJE2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY96F613ABPMC-GS-UJE2?
For technical support, including CY96F613ABPMC-GS-UJE2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY96F613ABPMC-GS-UJE2 requirements.
6.How does Aetrix verify that CY96F613ABPMC-GS-UJE2 is sourced from the original manufacturer or authorized distributors?
All CY96F613ABPMC-GS-UJE2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY96F613ABPMC-GS-UJE2 meets industry standards.
7.What is the process for return or replacement of CY96F613ABPMC-GS-UJE2?
All CY96F613ABPMC-GS-UJE2 units undergo pre-shipment inspection (PSI). If there is an issue with CY96F613ABPMC-GS-UJE2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY96F613ABPMC-GS-UJE2 part is unused and in its original packaging.
Return procedure for CY96F613ABPMC-GS-UJE2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY96F613ABPMC-GS-UJE2 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
