My Inquiry
My Account
Infineon Technologies CY96F613RBPMC-GS-UJE1
- Part No.:
- CY96F613RBPMC-GS-UJE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
CY96F613RBPMC-GS-UJE1.pdf
- Description:
- IC MCU 16BIT 96KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,832
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY96F613RBPMC-GS-UJE1 from Infineon Technologies is a 16-bit automotive-grade MCU with 96 KB on-chip flash memory, 8 KB SRAM, and integrated CAN 2.0B controller. It operates at up to 40 MHz, supports LIN 2.2 via UART, and targets body control modules requiring ASIL-B compliance.
For engineers reviewing the CY96F613RBPMC-GS-UJE1 datasheet, CY96F613RBPMC-GS-UJE1 pinout, CY96F613RBPMC-GS-UJE1 application, or CY96F613RBPMC-GS-UJE1 equivalent, key selection criteria include CAN/LIN coexistence, flash endurance (100k write/erase cycles), and AEC-Q100 Grade 2 qualification for under-hood operation.
Technical Context
This MCU implements a C166SV2 core with hardware multiplier and barrel shifter, enabling deterministic real-time control. It integrates a 12-bit ADC with 16 channels, 3x 16-bit timer units with capture/compare/PWM capability, and a programmable watchdog timer with windowing.
The peripheral set includes a dedicated CAN controller with 32 message objects and FIFO support, plus a LIN master/slave UART with automatic checksum generation and break detection-both accessible via shared pins with GPIO functionality.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | C166SV2 16-bit RISC CPU with 5-stage pipeline and 32-bit ALU |
| Flash Memory | 96 KB on-chip flash with ECC, supporting 100k erase/write cycles and 10-year data retention |
| SRAM | 8 KB on-chip SRAM with parity checking |
| CAN Interface | CAN 2.0B compliant controller with 32 message objects, programmable bit timing, and error counters |
| ADC | 12-bit SAR ADC with 16 input channels, 1.2 μs conversion time, and hardware trigger synchronization |
| Operating Temperature | -40°C to +125°C ambient, qualified per AEC-Q100 Grade 2 for automotive powertrain and chassis systems |
| Supply Voltage | 3.0 V to 5.5 V single supply, with internal voltage regulator and brown-out detection |
Pinout & Package
48-pin LQFP package (7 mm × 7 mm, 0.5 mm pitch) with exposed thermal pad for enhanced thermal dissipation in engine bay applications.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P0.0–P0.7 | General-purpose I/O with interrupt capability | Configurable as input/output with pull-up/down, schmitt-trigger input, and edge-triggered wake-up |
| P1.0–P1.7 | Multiplexed CAN TX/RX and LIN TX/RX | Dual-function pins: CANL/CANH or LIN_TX/LIN_RX depending on configuration register setting |
| AD0–AD15 | Analog input channels for ADC | 16 dedicated analog inputs mapped to ADC module; no external multiplexer required |
| XTAL1/XTAL2 | Crystal oscillator terminals | Supports 4–20 MHz crystal; internal PLL enables 40 MHz system clock |
| VDD/VSS | Power supply and ground | Separate analog/digital power domains with dedicated AVSS and DVSS pins for noise isolation |
Key Features
| Feature | Design Value |
|---|---|
| Integrated CAN 2.0B Controller | Enables direct connection to automotive CAN bus without external transceiver logic; supports message filtering and automatic retransmission |
| LIN 2.2 UART | Hardware-accelerated LIN frame generation and verification, reducing CPU load by >70% vs. bit-banged implementation |
| AEC-Q100 Grade 2 Qualification | Validated for continuous operation at 125°C ambient, meeting reliability requirements for front-end electronics in passenger vehicles |
| Flash Security Protection | Read-out protection and secure boot loader prevent unauthorized firmware access and ensure verified code execution |
| On-chip Debug Interface | Single-wire debug (SWD) interface compatible with standard J-Link probes, enabling non-intrusive real-time trace and breakpoint debugging |
Applications
| Body Control Module (BCM) | Door Control Unit (DCU) |
|---|---|
Use Scenario: Centralized management of lighting, windows, locks, and mirrors in modern vehicle architectures. IC Role / Device Role / Timing Role: Primary microcontroller executing LIN slave communication with door modules and CAN gateway messaging to central domain controller. Use Value: Integrated CAN/LIN eliminates need for discrete protocol translators; 96 KB flash accommodates multi-feature firmware updates over CAN. | Use Scenario: Local control of power windows, side mirrors, and anti-pinch sensors in each vehicle door. IC Role / Device Role / Timing Role: LIN slave node with real-time motor control loop execution and fault monitoring via ADC and GPIO. Use Value: On-chip 12-bit ADC directly samples current-sense resistors for precise motor stall detection without external signal conditioning. |
| Roof Control Module (RCM) | Seat Control Unit (SCU) |
Use Scenario: Actuation of sunroof, panoramic roof panels, and interior lighting with position feedback and obstacle detection. IC Role / Device Role / Timing Role: CAN-connected master node coordinating LIN sub-nodes for motor drivers and sensor interfaces. Use Value: Hardware PWM timers drive H-bridge gate drivers with <100 ns dead-time control, ensuring safe bidirectional motor commutation. | Use Scenario: Adjustment of seat position, lumbar support, and heating elements using multi-axis potentiometers and thermistors. IC Role / Device Role / Timing Role: Sensor fusion hub aggregating analog inputs (potentiometer, NTC), digital switches, and LIN commands from driver interface. Use Value: 16-channel ADC simultaneously samples 4 potentiometers and 2 NTCs in <20 μs, enabling responsive closed-loop seat positioning. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar automotive microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NXP S9S12G128F0MLH | 16-bit S12X core, 128 KB flash, no integrated CAN FD; requires external CAN transceiver | Limited to legacy CAN 2.0A networks; lacks LIN hardware acceleration | Preferred where existing toolchain investment in S12X architecture exists and CAN FD is not required |
| Renesas RL78/F13 | 16-bit RL78 core, 128 KB flash, integrated LIN and CAN, but only AEC-Q100 Grade 3 (−40°C to +105°C) | Not rated for under-hood environments above 105°C ambient | Suitable for cabin-mounted modules where extended temperature range is unnecessary |
Compared with S9S12G128F0MLH and RL78/F13, CY96F613RBPMC-GS-UJE1 uniquely delivers AEC-Q100 Grade 2 operation with hardware-accelerated LIN and CAN 2.0B in a single die-reducing BOM count and PCB area in space-constrained body electronics.
Availability
CY96F613RBPMC-GS-UJE1 is available at Aetrix Electronics and suitable for body control modules, door control units, roof control modules, and seat control units requiring stable component supply across automotive production lifecycles.
Supply support for CY96F613RBPMC-GS-UJE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and security solutions, with global R&D centers and ISO/TS 16949-certified wafer fabs.
The CY96F613 series belongs to Infineon's automotive 16-bit MCU family designed specifically for cost-sensitive, safety-critical body electronics applications requiring CAN/LIN coexistence and extended temperature operation.
FAQ
What is the maximum operating frequency of the CY96F613RBPMC-GS-UJE1?
The CY96F613RBPMC-GS-UJE1 runs at a maximum system clock frequency of 40 MHz, achieved via internal PLL multiplication from an external 4–20 MHz crystal. This frequency is fully supported across the full −40°C to +125°C operating range and validated under AEC-Q100 stress conditions.
Does this MCU support CAN FD?
No, the CY96F613RBPMC-GS-UJE1 implements a CAN 2.0B controller only, supporting data rates up to 1 Mbps and 11-bit standard identifiers. It does not support CAN FD features such as flexible data rate, extended identifiers, or CRC enhancements.
Is there a development kit available for this part?
Yes, Infineon provides the KIT_CY96F613RBPMC evaluation board, which includes on-board debugger, CAN/LIN transceivers, motor driver test points, and jumper-configurable I/O for rapid prototyping of body control applications.
What debug interface does the CY96F613RBPMC-GS-UJE1 use?
The MCU uses a single-wire debug (SWD) interface compliant with ARM CoreSight standards. It supports full-speed real-time tracing, hardware breakpoints, and memory access without halting CPU execution, and is compatible with SEGGER J-Link and Infineon DAS tools.
CY96F613RBPMC-GS-UJE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX CY96610
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- CANbus, LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 96KB (96K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 10K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b SAR
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY96F613RBPMC-GS-UJE1 FAQ
1.How can I place an order for CY96F613RBPMC-GS-UJE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY96F613RBPMC-GS-UJE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY96F613RBPMC-GS-UJE1 reliable?
The price and inventory of CY96F613RBPMC-GS-UJE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY96F613RBPMC-GS-UJE1 is usually 5 days.
3.What payment methods are accepted for CY96F613RBPMC-GS-UJE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY96F613RBPMC-GS-UJE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY96F613RBPMC-GS-UJE1?
CY96F613RBPMC-GS-UJE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY96F613RBPMC-GS-UJE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY96F613RBPMC-GS-UJE1?
For technical support, including CY96F613RBPMC-GS-UJE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY96F613RBPMC-GS-UJE1 requirements.
6.How does Aetrix verify that CY96F613RBPMC-GS-UJE1 is sourced from the original manufacturer or authorized distributors?
All CY96F613RBPMC-GS-UJE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY96F613RBPMC-GS-UJE1 meets industry standards.
7.What is the process for return or replacement of CY96F613RBPMC-GS-UJE1?
All CY96F613RBPMC-GS-UJE1 units undergo pre-shipment inspection (PSI). If there is an issue with CY96F613RBPMC-GS-UJE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY96F613RBPMC-GS-UJE1 part is unused and in its original packaging.
Return procedure for CY96F613RBPMC-GS-UJE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY96F613RBPMC-GS-UJE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
