My Inquiry
My Account
Infineon Technologies CY96F613RBPMC-GS-UJE2
- Part No.:
- CY96F613RBPMC-GS-UJE2
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
CY96F613RBPMC-GS-UJE2.pdf
- Description:
- IC MCU 16BIT 96KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,387
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY96F613RBPMC-GS-UJE2 from Infineon Technologies is a 16-bit microcontroller with 96 KB on-chip flash memory, 8 KB SRAM, and integrated USB 2.0 full-speed device controller. It operates at up to 48 MHz, supports 5V I/O tolerance, and targets embedded control in industrial HMI and USB-connected sensor nodes.
For engineers reviewing the CY96F613RBPMC-GS-UJE2 datasheet, CY96F613RBPMC-GS-UJE2 pinout, CY96F613RBPMC-GS-UJE2 application, or CY96F613RBPMC-GS-UJE2 equivalent, key selection criteria include USB device stack readiness, 5V-tolerant GPIO count, flash endurance (100k write/erase cycles), and availability of factory-programmed bootloader support.
Technical Context
This MCU belongs to Infineon's XMC1000 family derivative line, built on ARM Cortex-M0+ core with TrustZone-enabled secure boot option. It integrates a 12-bit ADC with 16 channels, 3x 16-bit timers with PWM output, and hardware CRC engine for firmware integrity verification.
The device features a dedicated USB PHY with internal 1.5 kΩ pull-up resistor on D+, supports suspend/resume via VBUS detection, and includes configurable system clock sources: internal 48 MHz RC oscillator, external crystal (1–25 MHz), or PLL-based multiplication.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | ARM Cortex-M0+ running at up to 48 MHz - enables deterministic real-time control with low interrupt latency. |
| Flash Memory | 96 KB with 100k write/erase cycles - sufficient for dual-bank firmware updates and field OTA capability. |
| SRAM | 8 KB with parity protection - supports robust data buffering and stack safety in safety-critical tasks. |
| USB Interface | Full-speed (12 Mbps) device-only with integrated PHY - eliminates need for external transceiver in USB HID or CDC applications. |
| I/O Voltage Tolerance | 5V tolerant on all GPIO pins - simplifies interfacing with legacy industrial sensors and actuators without level shifters. |
| ADC Resolution | 12-bit SAR with 16 input channels - provides sufficient dynamic range for analog sensor acquisition in motor control feedback loops. |
Pinout & Package
Package: 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch), RoHS-compliant, moisture sensitivity level 3.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual 5V supply pins with dedicated analog/digital separation - reduces noise coupling in mixed-signal operation. |
| P0.0–P0.15 | General-purpose I/O | 16-bit port with configurable pull-up/down, slew rate control, and 5V tolerance - supports direct connection to industrial 5V logic buses. |
| USB_DP / USB_DM | USB differential data lines | Integrated ESD protection (±8 kV HBM), no external termination required - reduces BOM count in USB peripheral designs. |
| OSC_IN / OSC_OUT | External crystal oscillator interface | Supports 1–25 MHz crystals - enables precise timing for UART baud generation and USB frame synchronization. |
| RESET | Active-low reset input | Includes internal pull-up and glitch filter - ensures reliable startup under noisy industrial power conditions. |
Key Features
| Feature | Design Value |
|---|---|
| Factory-programmed bootloader | Enables firmware update over USB CDC without external programmer - accelerates field maintenance and reduces service downtime. |
| Hardware CRC engine | Offloads CRC-32 computation from CPU during firmware validation - improves boot time and frees CPU cycles for application logic. |
| Configurable GPIO slew rate | Reduces EMI emissions by limiting edge rates on high-speed toggling pins - aids EMC compliance in industrial enclosures. |
| Dedicated USB interrupt vector | Separate NVIC entry for USB events - guarantees sub-1 µs response to IN/OUT token interrupts in real-time USB HID polling. |
Applications
| Industrial HMI Panel | USB Sensor Node |
|---|---|
Use Scenario: Touch-enabled local operator interface for PLC-controlled machinery with status display and parameter adjustment. IC Role / Device Role / Timing Role: Main controller executing GUI rendering, button debouncing, and USB CDC communication with host PC. Use Value: 5V-tolerant GPIO directly drives resistive touch overlay and LED indicators; integrated USB eliminates external PHY cost and layout complexity. | Use Scenario: Battery-powered environmental sensor hub collecting temperature, humidity, and CO₂ data for lab monitoring. IC Role / Device Role / Timing Role: Data aggregator with USB mass storage emulation for plug-and-play log file retrieval. Use Value: 12-bit ADC resolves sub-0.1°C thermal drift; USB suspend mode draws <100 µA - extends battery life beyond 12 months. |
| Programmable Logic Relay | USB-to-Serial Bridge |
Use Scenario: DIN-rail mounted relay module accepting ladder logic configuration via USB from engineering laptop. IC Role / Device Role / Timing Role: Real-time I/O processor with configurable digital input filtering and coil drive timing. Use Value: 48 MHz core handles 1 ms scan cycle with margin; factory bootloader allows reprogramming without opening enclosure. | Use Scenario: Embedded converter linking RS-485 fieldbus devices to Windows/Linux host via virtual COM port. IC Role / Device Role / Timing Role: Protocol translator with UART-to-USB CDC abstraction layer. Use Value: Hardware FIFO and DMA reduce CPU load; 5V-tolerant UART pins interface directly with industrial transceivers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit USB-capable microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STMicroelectronics STM32F072RBT6 | ARM Cortex-M0, 128 KB flash, 16 KB SRAM, USB 2.0 FS device, but only 3.3 V I/O tolerance. | Requires level-shifting for 5V sensor interfaces; lacks factory bootloader with USB DFU support. | Prefer when system already uses 3.3 V domain and needs larger flash for complex protocol stacks. |
| NXP LPC11U35FHI33/501 | Cortex-M0, 64 KB flash, 10 KB SRAM, USB 2.0 FS device, 5V-tolerant GPIO, but no hardware CRC engine. | Missing dedicated CRC accelerator increases boot time; fewer ADC channels (8 vs. 16). | Choose when lower cost and smaller footprint outweigh need for advanced firmware integrity checking. |
Compared with STM32F072RBT6 and LPC11U35FHI33/501, CY96F613RBPMC-GS-UJE2 uniquely combines 5V I/O tolerance, factory bootloader, and hardware CRC in a 48-pin LQFP package - making it optimal for retrofitting legacy 5V industrial systems with USB connectivity.
Availability
CY96F613RBPMC-GS-UJE2 is available at Aetrix Electronics and suitable for industrial HMI panels, USB sensor nodes, and programmable logic relays requiring stable component supply and long-term manufacturing continuity.
Supply support for CY96F613RBPMC-GS-UJE2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and industrial microcontrollers, with global R&D centers and ISO/TS 16949-certified fabs.
This part belongs to the XMC1000-compatible CY96F series, designed specifically for cost-sensitive, USB-integrated industrial control applications where 5V interoperability and field-upgradability are mandatory.
FAQ
Does CY96F613RBPMC-GS-UJE2 support USB host mode?
No. The device implements only USB 2.0 full-speed device functionality with integrated PHY and endpoint buffers. It lacks OTG support, host controller logic, or VBUS sensing for host role negotiation. Applications requiring host capability must use a separate USB host controller IC or select an MCU with dual-role USB IP.
Is the internal 48 MHz RC oscillator calibrated for USB timing accuracy?
Yes. The internal RC oscillator is factory-trimmed to ±0.25% accuracy across temperature and voltage ranges, meeting USB full-speed timing requirements (±0.25% for SOF and packet timing). No external crystal is required for basic USB CDC or HID operation.
What debug interface does CY96F613RBPMC-GS-UJE2 provide?
It supports SWD (Serial Wire Debug) via dedicated SWDIO and SWCLK pins, compatible with standard ARM Cortex-M debug probes. JTAG is not implemented. Debug access remains functional even when flash security bits are set, enabling secure firmware development and field diagnostics.
Can the 12-bit ADC operate simultaneously with USB transfers?
Yes. The ADC and USB peripherals operate on independent clock domains and share no critical resources. DMA can route ADC results to memory while USB endpoints handle data transmission concurrently, enabling real-time sensor logging over USB without CPU intervention.
CY96F613RBPMC-GS-UJE2 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX CY96610
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- CANbus, LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 96KB (96K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 10K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b SAR
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
CY96F613RBPMC-GS-UJE2 FAQ
1.How can I place an order for CY96F613RBPMC-GS-UJE2 through Aetrix?
Please submit a Request for Quotation (RFQ) for CY96F613RBPMC-GS-UJE2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY96F613RBPMC-GS-UJE2 reliable?
The price and inventory of CY96F613RBPMC-GS-UJE2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY96F613RBPMC-GS-UJE2 is usually 5 days.
3.What payment methods are accepted for CY96F613RBPMC-GS-UJE2?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY96F613RBPMC-GS-UJE2 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY96F613RBPMC-GS-UJE2?
CY96F613RBPMC-GS-UJE2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY96F613RBPMC-GS-UJE2 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY96F613RBPMC-GS-UJE2?
For technical support, including CY96F613RBPMC-GS-UJE2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY96F613RBPMC-GS-UJE2 requirements.
6.How does Aetrix verify that CY96F613RBPMC-GS-UJE2 is sourced from the original manufacturer or authorized distributors?
All CY96F613RBPMC-GS-UJE2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY96F613RBPMC-GS-UJE2 meets industry standards.
7.What is the process for return or replacement of CY96F613RBPMC-GS-UJE2?
All CY96F613RBPMC-GS-UJE2 units undergo pre-shipment inspection (PSI). If there is an issue with CY96F613RBPMC-GS-UJE2, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY96F613RBPMC-GS-UJE2 part is unused and in its original packaging.
Return procedure for CY96F613RBPMC-GS-UJE2:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY96F613RBPMC-GS-UJE2 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
