My Inquiry
My Account
Infineon Technologies ETD580N16P60HPSA1
- Part No.:
- ETD580N16P60HPSA1
- Manufacturer:
- Infineon Technologies
- Category:
- SCRs - Modules
- Package:
- Module
- Datasheet:
-
ETD580N16P60HPSA1.pdf
- Description:
- SCR MODULE 1.6KV 700A MODULE
- Quantity:
- Payment:
- Shipping:
Inventory:8,768
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ETD580N16P60HPSA1 from Infineon Technologies is a phase-control thyristor module with 1600 V repetitive peak off-state voltage (VDRM/VRRM), 586 A average on-state current at TC = 85°C (ITAVM), and 0.327 mΩ slope resistance (rT). It uses pressure-contact technology and features electrically insulated baseplate construction for high-reliability industrial power control in soft starters and static switches.
For engineers reviewing the ETD580N16P60HPSA1 datasheet, ETD580N16P60HPSA1 pinout, ETD580N16P60HPSA1 application, or ETD580N16P60HPSA1 equivalent, key selection criteria include junction-to-case thermal resistance (0.0645 K/W), critical dv/dt rating (1000 V/µs), gate trigger current (≤250 mA), and surge current capability (16.5 kA).
Technical Context
This dual-thyristor module operates in phase-controlled AC power regulation, supporting conduction angles from 30° to 180° in rectifier and crowbar applications. Its pressure-contact die assembly enables robust thermal cycling performance and low parasitic inductance, critical for high-current switching stability.
The device integrates two anti-parallel thyristor arms in a single 60 mm baseplate package, rated for 135 °C maximum junction temperature and 3.6 kV insulation test voltage (1 sec). Gate drive requirements are defined by triggering voltage ≤2 V and holding current ≤300 mA under standard conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDRM / VRRM | 1600 V - Maximum repetitive blocking voltage per thyristor arm, defining safe AC line voltage compatibility up to 1150 V RMS. |
| ITAVM (TC = 85°C) | 586 A - Continuous DC or sinusoidal average current per arm, determining steady-state thermal design margin. |
| ITSM (10 ms) | 16500 A - Non-repetitive surge current capability, enabling short-circuit protection in motor drives and UPS systems. |
| RthJC | 0.0645 K/W - Junction-to-case thermal resistance per arm, directly setting heatsink sizing requirements for 85°C case temperature operation. |
| (dv/dt)cr | 1000 V/µs - Minimum critical rate-of-rise of off-state voltage, specifying snubber design necessity for inductive loads. |
| VTO / rT | 0.8 V / 0.327 mΩ - Threshold voltage and slope resistance, jointly defining forward conduction loss profile at high current. |
| tq | 300 µs - Typical commutated turn-off time, constraining minimum operating frequency in phase-controlled rectifiers. |
Pinout & Package
ETD580N16P60HPSA1 is housed in an industrial-standard press-pack module with electrically insulated 60 mm baseplate and six main terminals: two anodes (A1, A2), two cathodes (K1, K2), and two gate terminals (G1, G2), arranged for dual anti-parallel thyristor configuration.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 | Anode of Thyristor Arm 1 | High-side AC input connection for first thyristor in anti-parallel pair; carries full load current during positive half-cycle. |
| K1 | Kathode of Thyristor Arm 1 | Output node for Arm 1; tied to common DC bus or load return in bridge configurations. |
| G1 | Gate of Thyristor Arm 1 | Low-energy control input requiring ≤250 mA trigger current; isolated from power terminals per IEC61140 Class 1 insulation. |
| A2 | Anode of Thyristor Arm 2 | High-side AC input for second thyristor; conducts during negative half-cycle in full-wave phase control. |
| K2 | Kathode of Thyristor Arm 2 | Output node for Arm 2; typically connected to same DC node as K1 in symmetrical bridge layouts. |
| G2 | Gate of Thyristor Arm 2 | Independent gate drive path for Arm 2; enables separate firing angle control in asymmetrical applications. |
Key Features
| Feature | Design Value |
|---|---|
| Pressure-contact die assembly | Eliminates wire bonds and solder layers, delivering >10⁵ thermal cycles and stable RthJC over lifetime. |
| Electrically insulated baseplate | AlN ceramic isolation (Class 1, IEC61140) enables direct mounting to grounded heatsinks without additional insulation. |
| Advanced Medium Power Technology (AMPT) | Optimized emitter geometry and gate layout reduce gate charge and improve di/dt immunity up to 200 A/µs. |
| 60 mm industrial package | Standardized mechanical footprint compatible with existing soft-starter and drive module heatsink interfaces. |
Applications
| Soft Starter | Rectifier for Drives |
|---|---|
Use Scenario: Controlled ramp-up of induction motor voltage during startup to limit inrush current and mechanical stress. IC Role / Device Role / Timing Role: Phase-controlled thyristor pair regulating AC voltage amplitude via firing-angle delay in each half-cycle. Use Value: Enables 3–5× reduction in starting current versus direct-on-line, preserving motor winding integrity and grid stability. | Use Scenario: AC-to-DC conversion in variable-frequency drive front-ends with regenerative braking support. IC Role / Device Role / Timing Role: Dual-arm thyristor module forming B6 six-pulse bridge, synchronized to line frequency for controllable DC bus voltage. Use Value: Delivers 1200 A output current capability at 135 °C junction temperature with <0.065 K/W thermal resistance per arm. |
| Crowbar Protection | Static Switch |
Use Scenario: Overvoltage protection in UPS and power supply systems by shorting output to ground during fault conditions. IC Role / Device Role / Timing Role: Fast-turn-on thyristor triggered by voltage monitor circuit to bypass load within microseconds. Use Value: Withstand 16.5 kA surge current for 10 ms and recover after fault clearance due to robust junction design. | Use Scenario: Solid-state replacement of electromechanical contactors in HVAC and industrial heating control. IC Role / Device Role / Timing Role: Bidirectional AC switching element controlled by zero-crossing or phase-fired logic for precise power delivery. Use Value: Achieves >10⁷ switching cycles with no contact wear, supported by 1000 V/µs dv/dt immunity and 300 µs turn-off time. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar phase-control thyristor module applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TT580N16KOF | Same VDRM (1600 V) and ITAVM (586 A), but non-insulated baseplate and higher RthJC (0.067 K/W). | Requires external isolation kit for grounded heatsink mounting; less suitable for space-constrained UPS designs. | Select when cost sensitivity outweighs insulation convenience and thermal margin is sufficient. |
| SKKT580/16E | Lower ITSM (12.5 kA vs. 16.5 kA), higher VTO (0.95 V), and larger 70 mm baseplate footprint. | Limited surge handling in crowbar applications; requires redesigned mechanical interface and heatsink clamping. | Prefer for legacy SKiiP-based systems where board-level compatibility is mandatory. |
Compared with TT580N16KOF and SKKT580/16E, ETD580N16P60HPSA1 offers superior thermal resistance (0.0645 K/W), integrated baseplate insulation, and highest surge current rating-making it optimal for new-design soft starters and compact UPS rectifiers demanding reliability and layout simplicity.
Availability
ETD580N16P60HPSA1 is available at Aetrix Electronics and suitable for soft starters, static switches, and battery charger rectifiers requiring stable component supply across industrial OEM production programs.
Supply support for ETD580N16P60HPSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power electronics, automotive ICs, and security solutions, with global manufacturing and R&D infrastructure.
This part belongs to Infineon's eTT series of high-power thyristor modules, engineered specifically for ruggedized industrial phase-control applications including motor control, energy conversion, and grid-tied protection systems.
FAQ
What is the maximum allowable case temperature for continuous operation?
The maximum case temperature (TC) for continuous operation is +135 °C, as specified in the thermal characteristics table. Operation above this temperature risks irreversible degradation of the pressure-contact interface and AlN insulation layer. Derating curves in the datasheet show ITAVM decreases to 420 A at TC = 100 °C for 180° conduction angle.
Does ETD580N16P60HPSA1 require forced-air cooling?
No forced-air cooling is mandated, but thermal design must ensure case temperature remains ≤135 °C under worst-case load. With RthCH ≈ 0.015 K/W (module-to-heatsink) and RthCA ≤ 0.15 K/W (heatsink-to-ambient), natural convection suffices only below ~300 A ITAVM; above that, forced air or liquid cooling is recommended.
Can gate terminals G1 and G2 be driven with a shared isolated gate driver?
Yes, G1 and G2 may share a single isolated gate driver if both thyristor arms are intended to fire simultaneously (e.g., in full-wave AC switching). However, independent gate control is required for asymmetrical firing or regeneration modes, necessitating two separate isolated drivers referenced to their respective cathodes.
What is the creepage distance and why does it matter for safety certification?
The creepage distance is 19 mm between primary-side terminals (A/K) and the insulated baseplate. This value satisfies IEC 61800-5-1 requirements for Pollution Degree 2 environments and supports reinforced insulation classification, enabling UL/EN 62109 certification in UPS and drive inverters without additional potting or barriers.
ETD580N16P60HPSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- Module
- Packaging:
- Tray
- Product Status:
- Active
- Structure:
- Series Connection - SCR/Diode
- Number of SCRs, Diodes:
- 1 SCR, 1 Diode
- Voltage - Off State:
- 1.6 kV
- Current - On State (It (AV)) (Max):
- 586 A
- Current - On State (It (RMS)) (Max):
- 700 A
- Voltage - Gate Trigger (Vgt) (Max):
- 2 V
- Current - Gate Trigger (Igt) (Max):
- 250 mA
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- 16500A @ 50Hz
- Current - Hold (Ih) (Max):
- 300 mA
- Operating Temperature:
- -40°C ~ 135°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Chassis Mount
ETD580N16P60HPSA1 FAQ
1.How can I place an order for ETD580N16P60HPSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for ETD580N16P60HPSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ETD580N16P60HPSA1 reliable?
The price and inventory of ETD580N16P60HPSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ETD580N16P60HPSA1 is usually 5 days.
3.What payment methods are accepted for ETD580N16P60HPSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ETD580N16P60HPSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ETD580N16P60HPSA1?
ETD580N16P60HPSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ETD580N16P60HPSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ETD580N16P60HPSA1?
For technical support, including ETD580N16P60HPSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ETD580N16P60HPSA1 requirements.
6.How does Aetrix verify that ETD580N16P60HPSA1 is sourced from the original manufacturer or authorized distributors?
All ETD580N16P60HPSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ETD580N16P60HPSA1 meets industry standards.
7.What is the process for return or replacement of ETD580N16P60HPSA1?
All ETD580N16P60HPSA1 units undergo pre-shipment inspection (PSI). If there is an issue with ETD580N16P60HPSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ETD580N16P60HPSA1 part is unused and in its original packaging.
Return procedure for ETD580N16P60HPSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ETD580N16P60HPSA1 Tags
-
MCC95-16IO1B
IXYS
-
TT190N16SOFHPSA2
Infineon Technologies
-
MCC162-16IO1
IXYS
-
B612F-2T
Sensata-Crydom
-
MCC312-16IO1
IXYS
-
TT250N16KOFHPSA1
Infineon Technologies
-
CLA60PD1200NA
IXYS
-
MCC56-16IO1B
IXYS
-
TD120N16SOFHPSA1
Infineon Technologies
-
MCC95-12IO1B
IXYS
-
MCMA140P1600TA
IXYS
-
B512F-2
Sensata-Crydom
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
