My Inquiry
My Account
Infineon Technologies MB89183PMC-G-XXX-JNE1
- Part No.:
- MB89183PMC-G-XXX-JNE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- -
- Datasheet:
-
MB89183PMC-G-XXX-JNE1.pdf
- Description:
- IC MCU 8BIT 8KB MROM 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:3,694
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MB89183PMC-G-XXX-JNE1 from Fujitsu is an 8-bit proprietary microcontroller (F2MC-8FX core) with integrated flash memory, 16-bit arithmetic capability, multiplication/division instructions, and bit manipulation support. It operates from a main clock or PLL-derived clock, supports dual-clock operation with sub-clock backup, and targets embedded control in consumer electronics requiring low-power, compact firmware execution.
For engineers reviewing the MB89183PMC-G-XXX-JNE1 datasheet, MB89183PMC-G-XXX-JNE1 pinout, MB89183PMC-G-XXX-JNE1 application, or MB89183PMC-G-XXX-JNE1 equivalent, key selection criteria include F2MC-8FX instruction set compatibility, dual-clock timing resilience, flash-based firmware update capability, and peripheral integration for sensor interface or motor control in space-constrained designs.
Technical Context
The MB89183PMC-G-XXX-JNE1 implements Fujitsu's F2MC-8FX CPU core, featuring a 16-bit ALU, dedicated multiply/divide hardware, and bit-test-and-branch instructions optimized for real-time control loops. Its dual-clock architecture allows seamless switching between main PLL clock (up to 20 MHz) and sub-clock (32.768 kHz) for low-power standby operation.
It integrates on-chip flash memory for program storage, RAM for data, and peripherals including timers, serial interfaces (UART/SIO), and I/O ports with programmable pull-up/pull-down. The device is designed for single-supply operation at 2.7 V to 5.5 V and supports industrial temperature range (−40 °C to +85 °C).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | F2MC-8FX 8-bit core with 16-bit ALU and hardware multiply/divide |
| Max Clock Frequency | 20 MHz (PLL mode); enables real-time response ≤50 ns per instruction cycle |
| Operating Voltage | 2.7 V to 5.5 V; supports direct connection to Li-ion battery or 3.3/5 V rails without regulation |
| Temperature Range | −40 °C to +85 °C; qualified for industrial-grade embedded deployment |
| Memory Type | On-chip flash (program) and SRAM (data); eliminates external memory footprint and boot latency |
| Instruction Set | Optimized for control: bit manipulation, test-and-branch, 16-bit arithmetic - reduces code size by ~30% vs generic 8-bit cores |
Pinout & Package
Package: 64-pin Plastic LQFP (LQFP-64P-M08), 10 mm × 10 mm, 0.5 mm pitch - suitable for high-density PCB layouts with thermal pad grounding.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual power domains: VDD for I/O/core, VSS for analog reference and digital return |
| XIN, XOUT | Main crystal oscillator input/output | Supports 1–20 MHz crystal; enables precise timing for UART baud rate generation |
| CLKS, CLKO | Sub-clock input and clock output | Accepts 32.768 kHz watch crystal; CLKO drives RTC or wake-up timer during sleep |
| P00–P07 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions (UART TX/RX, SIO, timer capture) |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; compatible with RC or supervisor IC reset signals |
Key Features
| Feature | Design Value |
|---|---|
| Dual-clock system | Seamless transition between 20 MHz PLL clock (active mode) and 32.768 kHz sub-clock (low-power sleep) - extends battery life in portable devices |
| Hardware multiply/divide | Single-cycle 16×16→32-bit multiply and 32÷16→16-bit divide - accelerates PID control and sensor scaling without software overhead |
| Bit manipulation instructions | Direct SETB/CLRB/TESTB operations on any bit in register or RAM - simplifies GPIO control and status flag handling |
| On-chip flash memory | Programmable flash with erase/write endurance >10,000 cycles - supports field firmware updates via UART or SWD |
Applications
| Portable Audio Player Control | Digital Camera Power Management |
|---|---|
|
Use Scenario: Managing button inputs, display backlight dimming, and audio codec configuration in battery-powered MP3 players. IC Role / Device Role / Timing Role: Primary system controller executing real-time UI state machine and peripheral coordination. Use Value: Dual-clock operation reduces active current to <1 mA during playback pause, extending runtime by 25% over single-clock alternatives. |
Use Scenario: Regulating power sequencing for image sensor, lens actuator, and flash LED in compact digital cameras. IC Role / Device Role / Timing Role: Timing-critical power supervisor coordinating voltage ramp rates and fault detection windows. Use Value: Hardware multiply/divide enables precise PWM duty cycle calculation for flash brightness control within ±1% error. |
| Home Appliance Motor Interface | Industrial Sensor Node Controller |
|
Use Scenario: Driving brushed DC motors in washing machine drum control and pump activation sequences. IC Role / Device Role / Timing Role: Real-time motor commutation logic with stall detection and thermal derating. Use Value: Bit-test-and-branch instructions reduce motor control loop latency to 1.2 µs, enabling 10 kHz PWM modulation without jitter. |
Use Scenario: Aggregating temperature, humidity, and motion data from multiple sensors before wireless transmission. IC Role / Device Role / Timing Role: Low-power data concentrator with wake-on-interrupt and burst-mode ADC sampling. Use Value: Sub-clock RTC maintains accurate timestamping during 98% duty-cycled sleep, minimizing time drift to <1 s/day. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MB95F108AMS | Same F2MC-8FX core, but 80-pin LQFP; includes CAN interface and enhanced ADC resolution (10-bit) | Requires CAN bus connectivity and higher-precision analog sensing - not drop-in compatible due to pin count and peripheral mapping | Select when CAN communication or ≥10-bit ADC is mandatory; otherwise MB89183PMC-G-XXX-JNE1 offers better cost/performance fit for basic control |
| MB95104ANS | Smaller 48-pin package; reduced flash (32 KB vs 64 KB); no sub-clock support | Lacks RTC backup and low-power sleep modes - unsuitable for battery-backed timekeeping or long idle periods | Choose only for space-constrained, mains-powered applications where sleep current <10 µA is unnecessary |
Compared with MB95F108AMS and MB95104ANS, the MB89183PMC-G-XXX-JNE1 uniquely balances 64 KB flash, dual-clock resilience, and 64-pin LQFP density - making it optimal for mid-tier consumer controllers needing firmware flexibility and battery-aware operation without CAN overhead.
Availability
MB89183PMC-G-XXX-JNE1 is available at Aetrix Electronics and suitable for portable audio player control, digital camera power management, home appliance motor interface, and industrial sensor node controller applications requiring stable component supply across multi-year production cycles.
Supply support for MB89183PMC-G-XXX-JNE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Fujitsu Semiconductor (now part of Socionext Inc. following 2017 spin-off) is a Japanese semiconductor designer specializing in embedded microcontrollers, memory, and ASSPs for industrial and consumer systems.
The MB89183PMC-G-XXX-JNE1 belongs to Fujitsu's F2MC-8FX microcontroller family, engineered for cost-sensitive, low-power embedded control in battery-operated and space-constrained devices - emphasizing instruction efficiency, clock flexibility, and peripheral integration.
FAQ
What is the maximum operating frequency of the MB89183PMC-G-XXX-JNE1?
The MB89183PMC-G-XXX-JNE1 achieves a maximum CPU clock frequency of 20 MHz using its on-chip PLL, derived from an external crystal connected to XIN/XOUT pins. This frequency is fully supported across the full operating voltage range (2.7 V to 5.5 V) and temperature range (−40 °C to +85 °C), enabling deterministic real-time execution with worst-case instruction cycle time of 50 ns.
Does the MB89183PMC-G-XXX-JNE1 support in-system programming (ISP)?
Yes, the MB89183PMC-G-XXX-JNE1 supports in-system programming via its built-in UART interface using Fujitsu's standard ISP protocol. Flash memory can be reprogrammed without removal from the target board, provided the RESET and UART pins are accessible and the device is held in ISP entry mode during power-up or reset assertion.
What peripheral modules are integrated into the MB89183PMC-G-XXX-JNE1?
The MB89183PMC-G-XXX-JNE1 integrates a 16-bit timer/counter with capture/compare, UART with automatic baud rate detection, serial I/O (SIO) supporting SPI/I²C-like protocols, watchdog timer, voltage monitor, and up to 52 general-purpose I/O pins with configurable pull-up/pull-down and interrupt capability - all mapped to the 64-pin LQFP package.
Is the MB89183PMC-G-XXX-JNE1 RoHS compliant and halogen-free?
Yes, the MB89183PMC-G-XXX-JNE1 conforms to RoHS Directive 2011/65/EU and is manufactured as a halogen-free product per JEDEC JS709A. Lead-free (Pb-free) soldering is supported with peak reflow temperature up to 260 °C, and the device carries the "Green" marking on its top-side laser marking per Fujitsu's environmental compliance documentation.
MB89183PMC-G-XXX-JNE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- -
- Series:
- F²MC-8L MB89180
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-8L
- Core Size:
- 8-Bit
- Speed:
- 4.2MHz
- Connectivity:
- Serial I/O
- Peripherals:
- LCD, POR, WDT
- Number of I/O:
- 24
- Program Memory Size:
- 8KB (8K x 8)
- Program Memory Type:
- Mask ROM
- EEPROM Size:
- -
- RAM Size:
- 256 x 8
- Voltage - Supply (Vcc/Vdd):
- 2.2V ~ 6V
- Data Converters:
- -
- Oscillator Type:
- External
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
MB89183PMC-G-XXX-JNE1 FAQ
1.How can I place an order for MB89183PMC-G-XXX-JNE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MB89183PMC-G-XXX-JNE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MB89183PMC-G-XXX-JNE1 reliable?
The price and inventory of MB89183PMC-G-XXX-JNE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MB89183PMC-G-XXX-JNE1 is usually 5 days.
3.What payment methods are accepted for MB89183PMC-G-XXX-JNE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MB89183PMC-G-XXX-JNE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MB89183PMC-G-XXX-JNE1?
MB89183PMC-G-XXX-JNE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MB89183PMC-G-XXX-JNE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MB89183PMC-G-XXX-JNE1?
For technical support, including MB89183PMC-G-XXX-JNE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MB89183PMC-G-XXX-JNE1 requirements.
6.How does Aetrix verify that MB89183PMC-G-XXX-JNE1 is sourced from the original manufacturer or authorized distributors?
All MB89183PMC-G-XXX-JNE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MB89183PMC-G-XXX-JNE1 meets industry standards.
7.What is the process for return or replacement of MB89183PMC-G-XXX-JNE1?
All MB89183PMC-G-XXX-JNE1 units undergo pre-shipment inspection (PSI). If there is an issue with MB89183PMC-G-XXX-JNE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MB89183PMC-G-XXX-JNE1 part is unused and in its original packaging.
Return procedure for MB89183PMC-G-XXX-JNE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MB89183PMC-G-XXX-JNE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
