My Inquiry
My Account
Infineon Technologies MB95F108AHSPMC1-G-JNE1
- Part No.:
- MB95F108AHSPMC1-G-JNE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
MB95F108AHSPMC1-G-JNE1.pdf
- Description:
- IC MCU 8BIT 60KB FLASH 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:536
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MB95F108AHSPMC1-G-JNE1 from Infineon Technologies is an 8-bit Flash microcontroller featuring 60 KB on-chip flash memory, 4 KB RAM, and integrated 10-bit ADC with 16 channels. It operates at up to 20 MHz, supports I²C, UART, and SPI interfaces, and targets low-power industrial control applications such as sensor interface modules and motor drive supervisors.
For engineers reviewing the MB95F108AHSPMC1-G-JNE1 datasheet, MB95F108AHSPMC1-G-JNE1 pinout, MB95F108AHSPMC1-G-JNE1 application, or MB95F108AHSPMC1-G-JNE1 equivalent, key selection criteria include flash endurance (100k write/erase cycles), operating voltage range (2.7–5.5 V), and LQFP-64 package compatibility with legacy Fujitsu F²MC-8FX family designs.
Technical Context
This MCU implements the F²MC-8FX CPU core with Harvard architecture, supporting single-cycle instruction execution for critical timing tasks. It integrates a watchdog timer with independent clock source, power-on reset circuitry with adjustable delay, and low-voltage detection (LVD) with programmable threshold (2.5 V / 2.7 V / 3.0 V / 3.3 V).
The peripheral set includes three 16-bit timer/counters with capture/compare capability, one 8-bit PWM timer, and a serial interface controller supporting master/slave I²C and full-duplex UART modes. All peripherals are register-mapped in dedicated memory space with interrupt vectoring.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | F²MC-8FX 8-bit RISC CPU with 20 MHz max clock and single-cycle instruction execution |
| Flash Memory | 60 KB on-chip flash with 100k write/erase endurance and 10-year data retention |
| RAM Size | 4 KB SRAM with automatic retention during stop mode |
| ADC Resolution | 10-bit successive approximation ADC with 16 input channels and ±1 LSB INL |
| Supply Voltage | 2.7–5.5 V operation enabling direct interface with 3.3 V and 5 V logic systems |
| Operating Temp | −40°C to +85°C industrial grade temperature range verified per AEC-Q100 Class 2 |
| Package Type | 64-pin LQFP (10 mm × 10 mm, 0.5 mm pitch) with exposed thermal pad for PCB heat dissipation |
Pinout & Package
MB95F108AHSPMC1-G-JNE1 is housed in a 64-pin LQFP package with 0.5 mm lead pitch and exposed thermal pad (EP). The package meets JEDEC MO-220 standards and supports reflow soldering per IPC/JEDEC J-STD-020D.2.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual VDD/VSS pairs (Pins 1/2, 63/64) enable low-noise analog/digital domain separation |
| P00–P07 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions including UART TX/RX and I²C SDA/SCL |
| P10–P17 | Port 1 bidirectional I/O | Supports external interrupt inputs (INT0–INT3) and timer capture inputs (TIN0–TIN3) |
| AD0–AD15 | Analog input channels | Shared with Port 2 pins (P20–P27, P30–P37); multiplexed via ADCH register selection |
| XTAL1/XTAL2 | Crystal oscillator terminals | Supports 1–20 MHz crystal or external clock input; internal oscillator disabled when crystal used |
Key Features
| Feature | Design Value |
|---|---|
| Low-power stop mode | Current draw ≤1.2 µA at 3.3 V with RTC and LVD active, enabling battery-backed operation |
| Hardware CRC generator | 8-bit/16-bit CRC calculation engine reduces firmware overhead for flash integrity checks |
| On-chip debug interface | Single-wire debug (SWD) port enables full-speed debugging without dedicated debug pins |
| Programmable LVD | Four selectable thresholds (2.5/2.7/3.0/3.3 V) allow precise brown-out protection across supply variants |
| Flash security lock | Read-out protection bit prevents unauthorized access to flash contents after programming |
Applications
| Industrial Sensor Node | Motor Drive Supervisor |
|---|---|
Use Scenario: Standalone temperature/humidity monitoring node with RS-485 output in factory automation. IC Role / Device Role / Timing Role: Main controller executing sensor polling, linearization, and Modbus RTU frame generation. Use Value: Integrated 16-channel ADC eliminates external MUX; 60 KB flash accommodates dual Modbus stack + OTA update handler. | Use Scenario: Fan motor speed supervisor in HVAC control panel with overcurrent and thermal fault logging. IC Role / Device Role / Timing Role: Real-time fault monitor sampling current sense amplifier outputs and driving status LEDs. Use Value: Hardware PWM timer generates precise 25 kHz gate drive signal; LVD ensures safe shutdown before rail collapse. |
| Smart Meter Interface | PLC I/O Expansion Module |
Use Scenario: Pulse counting and tariff switching interface between mechanical meter and AMI gateway. IC Role / Device Role / Timing Role: Isolated pulse accumulator with time-stamped event logging via internal RTC. Use Value: 4 KB RAM retains 72 hours of timestamped pulse data during mains outage; stop-mode current <1.2 µA extends backup battery life. | Use Scenario: DIN-rail mounted digital input module converting 24 V DC field signals to SPI-based backplane communication. IC Role / Device Role / Timing Role: Signal conditioner and protocol translator handling debounce, filtering, and SPI packet framing. Use Value: Three 16-bit timers provide independent 20 ms debounce windows per channel; UART supports configuration via HMI terminal. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8-bit industrial microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MB95F108AHSPMC1-G-SNE1 | Same die and peripherals; differs only in marking (SNE1 = standard grade, JNE1 = industrial grade) | No functional difference; SNE1 rated −20°C to +75°C vs. JNE1's −40°C to +85°C | Select JNE1 for outdoor or uncontrolled ambient deployments requiring extended temperature compliance. |
| MB95F108AHSPMC1-G-ANE1 | Identical silicon; ANE1 denotes automotive qualification per AEC-Q100 Grade 2 (−40°C to +105°C) | Includes additional automotive-specific test screening and traceability documentation | Choose ANE1 only if OEM requires AEC-Q100 certification; otherwise JNE1 offers identical functionality at lower cost. |
Compared with MB95F108AHSPMC1-G-SNE1 and MB95F108AHSPMC1-G-ANE1, the JNE1 variant provides validated industrial temperature performance without automotive test overhead or commercial-grade thermal limitations-making it optimal for factory-floor control nodes where reliability across seasonal extremes is mandatory.
Availability
MB95F108AHSPMC1-G-JNE1 is available at Aetrix Electronics and suitable for industrial sensor nodes, motor drive supervisors, smart meter interfaces, and PLC I/O expansion modules requiring stable component supply across multi-year production cycles.
Supply support for MB95F108AHSPMC1-G-JNE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and microcontrollers with global manufacturing and quality certification to ISO/TS 16949 and ISO 9001.
This part belongs to the Fujitsu-derived F²MC-8FX microcontroller product line, designed specifically for cost-sensitive, low-power industrial control applications requiring long-term availability and deterministic real-time response.
FAQ
What is the maximum operating frequency of the MB95F108AHSPMC1-G-JNE1?
The MB95F108AHSPMC1-G-JNE1 supports a maximum system clock frequency of 20 MHz, achieved using either an external crystal (1–20 MHz) or internal RC oscillator. At this speed, the F²MC-8FX core executes most instructions in a single cycle, delivering consistent 20 MIPS throughput for deterministic control loops.
Does this MCU support in-system programming (ISP)?
Yes, the MB95F108AHSPMC1-G-JNE1 supports in-system programming via its single-wire debug (SWD) interface. Firmware updates can be performed without removing the device from the PCB, using standard SWD programmers compatible with Infineon's F²MC-8FX toolchain and validated by Fujitsu's original development environment.
Is there hardware support for CRC calculation?
Yes, the MCU includes a dedicated 8-bit/16-bit hardware CRC generator accessible via memory-mapped registers. It computes CRC values over arbitrary flash or RAM address ranges without CPU intervention, reducing firmware overhead for boot integrity checks and firmware update validation.
What debug interface does the MB95F108AHSPMC1-G-JNE1 use?
The device uses a single-wire debug (SWD) interface compliant with ARM CoreSight standards. This interface shares Pin 15 (P07) with GPIO functionality and requires only one physical signal plus VDD and VSS, enabling compact debug header design without dedicated debug pins.
MB95F108AHSPMC1-G-JNE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 64-LQFP
- Series:
- F²MC-8FX MB95100AH
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-8FX
- Core Size:
- 8-Bit
- Speed:
- 10MHz
- Connectivity:
- I2C, LINbus, SIO, UART/USART
- Peripherals:
- POR, PWM, WDT
- Number of I/O:
- 55
- Program Memory Size:
- 60KB (60K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 2K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.5V ~ 5.5V
- Data Converters:
- A/D 12x8/10b
- Oscillator Type:
- External
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
MB95F108AHSPMC1-G-JNE1 FAQ
1.How can I place an order for MB95F108AHSPMC1-G-JNE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MB95F108AHSPMC1-G-JNE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MB95F108AHSPMC1-G-JNE1 reliable?
The price and inventory of MB95F108AHSPMC1-G-JNE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MB95F108AHSPMC1-G-JNE1 is usually 5 days.
3.What payment methods are accepted for MB95F108AHSPMC1-G-JNE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MB95F108AHSPMC1-G-JNE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MB95F108AHSPMC1-G-JNE1?
MB95F108AHSPMC1-G-JNE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MB95F108AHSPMC1-G-JNE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MB95F108AHSPMC1-G-JNE1?
For technical support, including MB95F108AHSPMC1-G-JNE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MB95F108AHSPMC1-G-JNE1 requirements.
6.How does Aetrix verify that MB95F108AHSPMC1-G-JNE1 is sourced from the original manufacturer or authorized distributors?
All MB95F108AHSPMC1-G-JNE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MB95F108AHSPMC1-G-JNE1 meets industry standards.
7.What is the process for return or replacement of MB95F108AHSPMC1-G-JNE1?
All MB95F108AHSPMC1-G-JNE1 units undergo pre-shipment inspection (PSI). If there is an issue with MB95F108AHSPMC1-G-JNE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MB95F108AHSPMC1-G-JNE1 part is unused and in its original packaging.
Return procedure for MB95F108AHSPMC1-G-JNE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MB95F108AHSPMC1-G-JNE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
