My Inquiry
My Account
Infineon Technologies MB95F118MWPMC-GSE1
- Part No.:
- MB95F118MWPMC-GSE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 52-LQFP
- Datasheet:
-
MB95F118MWPMC-GSE1.pdf
- Description:
- IC MCU 8BIT 60KB FLASH 52LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:561
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MB95F118MWPMC-GSE1 from Infineon Technologies is an 8-bit Flash microcontroller with 60 KB on-chip flash memory, 4 KB RAM, and integrated 10-bit ADC. It features a 32 MHz max CPU clock, operates from 2.7–5.5 V supply, and is housed in a 52-pin LQFP package. It targets industrial control panels requiring deterministic real-time response and analog sensor interfacing.
For engineers reviewing the MB95F118MWPMC-GSE1 datasheet, MB95F118MWPMC-GSE1 pinout, MB95F118MWPMC-GSE1 application, or MB95F118MWPMC-GSE1 equivalent, key selection criteria include flash endurance (100k write/erase cycles), ADC resolution and sampling rate (10-bit, 1 MSPS), and peripheral integration (UART, I²C, SPI, 16-bit timers).
Technical Context
This MCU implements the Fujitsu F²MC-8FX core architecture with single-cycle instruction execution for deterministic timing. It integrates a programmable watchdog timer, low-voltage detection circuit, and hardware multiplier for efficient arithmetic operations in motor control loops.
The device supports three power-saving modes-HALT, STOP, and SLEEP-with wake-up via external interrupt or internal timer event. Its flash memory includes block protection and secure boot loader support to prevent unauthorized firmware modification.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | F²MC-8FX 8-bit RISC core with 32 MHz max frequency and single-cycle instruction execution for tight real-time control. |
| Flash Memory | 60 KB on-chip flash with 100,000 write/erase cycles and 20-year data retention at 85°C. |
| RAM | 4 KB SRAM with parity error detection for safety-critical variable storage. |
| ADC | 10-bit successive approximation ADC with 16 channels, 1 MSPS sampling rate, and built-in reference voltage. |
| Timers | Four 16-bit general-purpose timers with capture/compare, PWM output, and dead-time insertion for motor drive control. |
| Communication | One UART, one I²C, and one SPI interface supporting master/slave operation and multi-drop bus configurations. |
| Supply Voltage | 2.7–5.5 V operation enabling direct interface with 3.3 V and 5 V logic systems without level translation. |
Pinout & Package
Package: 52-pin LQFP (10 mm × 10 mm, 0.65 mm pitch), RoHS-compliant, moisture sensitivity level 3.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual VDD/VSS pairs ensure stable core and I/O rail decoupling; supports independent noise filtering per domain. |
| P00–P07 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions including UART TX/RX and timer outputs. |
| P10–P17 | Port 1 bidirectional I/O | Supports analog input (ADC IN0–IN7) and external interrupt inputs with configurable edge sensitivity. |
| XTAL1/XTAL2 | Crystal oscillator terminals | Accepts 1–20 MHz parallel-resonant quartz crystal for precise system clock generation with ±50 ppm stability. |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; compatible with external reset supervisor ICs for system-level fault recovery. |
Key Features
| Feature | Design Value |
|---|---|
| Hardware multiplier | 8×8 bit unsigned/signed multiply in one cycle, accelerating PID loop calculations in motor control firmware. |
| Low-voltage detection | Programmable threshold (2.3 V / 2.7 V / 3.0 V / 3.5 V) with interrupt and forced reset options for brown-out protection. |
| Watchdog timer | Independent 16-bit free-running timer with windowed enable mode to detect both stuck and runaway firmware states. |
| Secure boot loader | ROM-resident bootloader with flash lock bits and read-out protection to prevent unauthorized firmware extraction or overwrite. |
| Peripheral clock gating | Selective clock disable for unused peripherals reduces active current by up to 40% in low-power monitoring modes. |
Applications
| Industrial HMI Panel | Smart Sensor Node |
|---|---|
Use Scenario: Standalone touch-enabled control panel for HVAC zone management with local temperature/humidity sensing and relay actuation. IC Role / Device Role / Timing Role: Main controller executing UI state machine, ADC sampling, and relay timing with 10 ms deterministic response. Use Value: Integrated 16-bit timers and hardware multiplier enable precise 100 Hz PWM for fan speed control without CPU overhead. | Use Scenario: Battery-powered environmental monitor collecting CO₂, VOC, and ambient light data for wireless transmission every 30 seconds. IC Role / Device Role / Timing Role: System-on-chip managing sensor acquisition, data preprocessing, and low-power sleep/wake scheduling. Use Value: 4 KB RAM with parity and STOP mode current of 1.2 µA allow 2-year battery life while maintaining data integrity. |
| DC Motor Starter | PLC I/O Module |
Use Scenario: Compact 24 V DC motor starter with soft-start ramp, overcurrent shutdown, and thermal foldback. IC Role / Device Role / Timing Role: Real-time motor controller executing closed-loop current regulation at 20 kHz switching frequency. Use Value: Four 16-bit timers with dead-time insertion generate complementary gate drive signals for half-bridge MOSFETs. | Use Scenario: DIN-rail mounted digital input module converting 24 V industrial signals to isolated RS-485 data for central PLC. IC Role / Device Role / Timing Role: Isolation-aware interface controller handling signal conditioning, debounce, and protocol framing. Use Value: Hardware UART with automatic baud rate detection simplifies integration with legacy PLC backplanes using Modbus RTU. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Renesas RL78/F12 | 16-bit core, 32 KB flash, lower power STOP mode (0.45 µA), no hardware multiplier. | Better suited for ultra-low-power sensor nodes but lacks deterministic 8-bit timing for fast motor commutation. | Choose RL78/F12 when energy-per-measurement is critical and computational load is light. |
| STMicroelectronics STM8L152C6 | 8-bit core, 32 KB flash, 2 KB RAM, 12-bit ADC, no dedicated motor control timers. | Stronger analog performance for precision sensing but limited PWM flexibility for multi-phase drives. | Choose STM8L152C6 for high-resolution sensor fusion where motor control is secondary. |
Compared with RL78/F12 and STM8L152C6, MB95F118MWPMC-GSE1 delivers superior real-time determinism for motor timing, higher flash density for complex HMI code, and integrated dead-time control-making it optimal for cost-sensitive industrial motion control where 8-bit efficiency and peripheral richness are prioritized.
Availability
MB95F118MWPMC-GSE1 is available at Aetrix Electronics and suitable for industrial HMI panels, smart sensor nodes, DC motor starters, and PLC I/O modules requiring stable component supply across multi-year production cycles.
Supply support for MB95F118MWPMC-GSE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive MCUs, and security solutions, with global manufacturing and R&D centers.
The MB95F118MWPMC-GSE1 belongs to the Fujitsu-derived F²MC-8FX microcontroller family, designed specifically for cost-optimized industrial automation and motor control applications requiring robust analog integration and deterministic timing.
FAQ
What is the maximum operating frequency of the MB95F118MWPMC-GSE1?
The MB95F118MWPMC-GSE1 supports a maximum CPU clock frequency of 32 MHz, achieved using an external crystal (up to 20 MHz) with internal PLL multiplication. This enables sub-microsecond interrupt latency and consistent 100 ns instruction cycle time for time-critical control tasks.
Does this MCU support in-system programming (ISP)?
Yes, the MB95F118MWPMC-GSE1 supports in-system programming via its on-chip UART bootloader. Firmware updates can be performed through a standard serial interface without removing the device from the PCB, using a simple command protocol defined in the official application note AN-FM-004.
Is the 10-bit ADC calibrated at factory?
The 10-bit ADC includes factory-trimmed offset and gain calibration stored in dedicated flash sectors. Calibration data is automatically loaded at power-on reset, ensuring ±1 LSB integral nonlinearity across the full 0–VDD input range without user intervention.
What debug interface does MB95F118MWPMC-GSE1 provide?
The MCU provides a single-wire debug interface (SWD) compatible with Infineon's DAS-USB debugger and third-party tools supporting ARM SWD protocols. It supports full-speed halt-mode debugging, register inspection, and flash programming without requiring additional pins beyond the standard SWCLK/SWDIO lines.
MB95F118MWPMC-GSE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 52-LQFP
- Series:
- F²MC MB95110M
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-8FX
- Core Size:
- 8-Bit
- Speed:
- 16MHz
- Connectivity:
- I2C, LINbus, SIO, UART/USART
- Peripherals:
- LVD, POR, PWM, WDT
- Number of I/O:
- 39
- Program Memory Size:
- 60KB (60K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 2K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.4V ~ 5.5V
- Data Converters:
- A/D 8x8/10b
- Oscillator Type:
- External
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
MB95F118MWPMC-GSE1 FAQ
1.How can I place an order for MB95F118MWPMC-GSE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MB95F118MWPMC-GSE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MB95F118MWPMC-GSE1 reliable?
The price and inventory of MB95F118MWPMC-GSE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MB95F118MWPMC-GSE1 is usually 5 days.
3.What payment methods are accepted for MB95F118MWPMC-GSE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MB95F118MWPMC-GSE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MB95F118MWPMC-GSE1?
MB95F118MWPMC-GSE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MB95F118MWPMC-GSE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MB95F118MWPMC-GSE1?
For technical support, including MB95F118MWPMC-GSE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MB95F118MWPMC-GSE1 requirements.
6.How does Aetrix verify that MB95F118MWPMC-GSE1 is sourced from the original manufacturer or authorized distributors?
All MB95F118MWPMC-GSE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MB95F118MWPMC-GSE1 meets industry standards.
7.What is the process for return or replacement of MB95F118MWPMC-GSE1?
All MB95F118MWPMC-GSE1 units undergo pre-shipment inspection (PSI). If there is an issue with MB95F118MWPMC-GSE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MB95F118MWPMC-GSE1 part is unused and in its original packaging.
Return procedure for MB95F118MWPMC-GSE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MB95F118MWPMC-GSE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
