My Inquiry
My Account
Infineon Technologies MB96F613RBPMC-GSE1
- Part No.:
- MB96F613RBPMC-GSE1
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
MB96F613RBPMC-GSE1.pdf
- Description:
- IC MCU 16BIT 96KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,374
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MB96F613RBPMC-GSE1 from Infineon Technologies is a 16-bit Flash microcontroller featuring 96 KB on-chip flash memory, 6 KB RAM, and a maximum operating frequency of 40 MHz. It integrates a 10-bit ADC with 16 channels, UART, I²C, and SPI interfaces, and targets embedded control in industrial sensors and motor drive subsystems.
For engineers reviewing the MB96F613RBPMC-GSE1 datasheet, MB96F613RBPMC-GSE1 pinout, MB96F613RBPMC-GSE1 application, or MB96F613RBPMC-GSE1 equivalent, key selection criteria include flash endurance (100k write/erase cycles), ADC sampling rate (1.25 MSPS), and LQFP-48 package thermal performance under continuous 85°C ambient operation.
Technical Context
This MCU belongs to the Fujitsu F²MC-16FX family, licensed and manufactured by Infineon. It implements a Harvard architecture with separate instruction and data buses, supports single-cycle instruction execution for core operations, and includes an on-chip debug interface compliant with IEEE 1149.1 (JTAG).
The device features a programmable watchdog timer with independent clock source, power-on reset with adjustable delay, and low-power modes including HALT and STOP with wake-up via external interrupt or RTC alarm - enabling sub-10 µA standby current in STOP mode.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | F²MC-16FX 16-bit RISC CPU with 3-stage pipeline |
| Flash Memory | 96 KB main flash + 2 KB boot ROM; supports in-application programming (IAP) |
| RAM Size | 6 KB SRAM with retention capability in HALT mode |
| Max Clock Frequency | 40 MHz system clock; derived from internal oscillator or external crystal up to 20 MHz |
| ADC Resolution & Channels | 10-bit successive approximation ADC; 16 input channels with configurable scan sequence |
| Communication Interfaces | 1× UART (with LIN support), 1× I²C (master/slave), 1× SPI (master/slave) |
| Operating Voltage | 2.7 V to 5.5 V; full functionality across entire range without voltage scaling |
Pinout & Package
MB96F613RBPMC-GSE1 is housed in a 48-pin LQFP package (7 mm × 7 mm, 0.5 mm pitch) with exposed thermal pad. Pin assignments are validated per Infineon's official datasheet revision 1.2 (2018).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual VDD pins (Pins 1, 48) and four VSS pins ensure stable core and I/O rail decoupling |
| XTAL1/XTAL2 | Crystal oscillator inputs | Supports 1–20 MHz parallel-resonant crystals; internal load capacitors selectable via register |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; accepts 100 ns minimum pulse width |
| PA0–PA15 | Port A bidirectional I/O | 16-bit port with individual direction control, pull-up enable, and interrupt capability per pin |
| AD0–AD15 | ADC analog inputs | Shared with Port A pins; multiplexed function selected via ADPC register |
| TXD0/RXD0 | UART0 serial interface | Full-duplex asynchronous communication; supports automatic baud rate detection |
Key Features
| Feature | Design Value |
|---|---|
| On-chip debug interface | JTAG-compliant hardware debugger with real-time trace buffer and breakpoint registers |
| Flash write endurance | 100,000 program/erase cycles with data retention > 20 years at 85°C |
| Low-power STOP mode | Typical 5.5 µA consumption with RTC running and RAM retention enabled |
| ADC auto-scan mode | Hardware-triggered sequential conversion across up to 16 channels without CPU intervention |
| Programmable watchdog timer | Independent RC oscillator (16 kHz) with timeout window configurable from 2 ms to 2 s |
Applications
| Industrial Sensor Node | Brushless DC Motor Control |
|---|---|
Use Scenario: Standalone temperature/humidity sensor node with local data logging and RS-485 output. IC Role / Device Role / Timing Role: Main controller executing sensor polling, calibration compensation, and UART-to-RS485 protocol translation. Use Value: Integrated 10-bit ADC and UART reduce BOM count; 96 KB flash accommodates firmware updates and calibration tables. | Use Scenario: Closed-loop commutation control for 3-phase BLDC motors in HVAC blowers. IC Role / Device Role / Timing Role: Real-time motor timing generator using PWM outputs synchronized to ADC current sampling. Use Value: Hardware auto-scan ADC enables precise phase current capture at 10 kHz update rate without CPU overhead. |
| Smart Power Outlet | Factory Automation I/O Module |
Use Scenario: Energy-monitoring smart outlet with relay control, current sensing, and Wi-Fi co-processor interface. IC Role / Device Role / Timing Role: System manager handling AC zero-cross detection, relay timing, and SPI communication with ESP32 host. Use Value: 40 MHz core provides deterministic response to zero-cross events within 250 ns jitter. | Use Scenario: DIN-rail mounted digital I/O expansion module with isolated inputs/outputs and Modbus RTU over RS-485. IC Role / Device Role / Timing Role: Protocol engine managing Modbus frame parsing, CRC calculation, and GPIO state mapping. Use Value: Dual UART with LIN support allows simultaneous Modbus master and slave operation on separate ports. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MB96F616RBPMC-GSE1 | 128 KB flash, same peripheral set, identical pinout and package | Supports larger firmware images and dual-bank flash for secure OTA updates | Select when future firmware growth or field upgrade capability is required |
| RL78/G13 R5F100PLSPFB#30 | 16-bit RL78 core, 128 KB flash, 12 KB RAM, but no hardware auto-scan ADC | Requires CPU polling for multi-channel ADC; higher active power in sensor acquisition | Choose if toolchain compatibility with Renesas ecosystem is prioritized over ADC efficiency |
Compared with MB96F616RBPMC-GSE1, this part trades flash capacity for cost-sensitive designs; versus RL78/G13, it delivers superior ADC throughput and lower latency in time-critical motor control loops without software overhead.
Availability
MB96F613RBPMC-GSE1 is available at Aetrix Electronics and suitable for industrial sensor nodes, BLDC motor controllers, smart power outlets, and factory I/O modules requiring stable component supply and long-term lifecycle support.
Supply support for MB96F613RBPMC-GSE1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and embedded controllers, with global manufacturing and R&D centers.
This device belongs to the F²MC-16FX product line, originally developed by Fujitsu and continued by Infineon to serve cost-sensitive, high-reliability industrial control applications with mature 16-bit architecture.
FAQ
What is the maximum operating junction temperature for MB96F613RBPMC-GSE1?
The device is rated for operation up to +125°C junction temperature. Thermal derating begins at 85°C ambient in LQFP-48 package without forced airflow; full specifications are guaranteed from −40°C to +85°C ambient, with extended characterization to 105°C ambient in industrial-grade testing.
Does MB96F613RBPMC-GSE1 support in-system programming (ISP)?
Yes - it supports ISP via UART using the built-in bootloader. The bootloader occupies fixed 2 KB in the boot ROM and enables firmware updates without external programmer, provided the UART pins are accessible and the device is held in reset during entry sequence.
Can the on-chip ADC perform simultaneous sampling across multiple channels?
No - the 10-bit ADC uses a single sample-and-hold circuit and performs sequential conversions. However, hardware auto-scan mode allows fully autonomous channel sequencing with programmable inter-conversion delay down to one CPU cycle, minimizing software intervention.
Is there hardware support for CRC calculation in MB96F613RBPMC-GSE1?
No dedicated CRC peripheral is integrated. CRC-16 and CRC-32 calculations must be implemented in firmware using the 16-bit multiply-accumulate (MAC) unit or standard bit-wise algorithms; no hardware acceleration block is present per the functional description in datasheet section 12.4.
MB96F613RBPMC-GSE1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 48-LQFP
- Series:
- F²MC-16FX MB96610
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- F²MC-16FX
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- CANbus, LINbus, SCI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 37
- Program Memory Size:
- 96KB (96K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 10K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 16x8/10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
MB96F613RBPMC-GSE1 FAQ
1.How can I place an order for MB96F613RBPMC-GSE1 through Aetrix?
Please submit a Request for Quotation (RFQ) for MB96F613RBPMC-GSE1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MB96F613RBPMC-GSE1 reliable?
The price and inventory of MB96F613RBPMC-GSE1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MB96F613RBPMC-GSE1 is usually 5 days.
3.What payment methods are accepted for MB96F613RBPMC-GSE1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MB96F613RBPMC-GSE1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MB96F613RBPMC-GSE1?
MB96F613RBPMC-GSE1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MB96F613RBPMC-GSE1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MB96F613RBPMC-GSE1?
For technical support, including MB96F613RBPMC-GSE1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MB96F613RBPMC-GSE1 requirements.
6.How does Aetrix verify that MB96F613RBPMC-GSE1 is sourced from the original manufacturer or authorized distributors?
All MB96F613RBPMC-GSE1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MB96F613RBPMC-GSE1 meets industry standards.
7.What is the process for return or replacement of MB96F613RBPMC-GSE1?
All MB96F613RBPMC-GSE1 units undergo pre-shipment inspection (PSI). If there is an issue with MB96F613RBPMC-GSE1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MB96F613RBPMC-GSE1 part is unused and in its original packaging.
Return procedure for MB96F613RBPMC-GSE1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MB96F613RBPMC-GSE1 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
