Infineon Technologies S6E2GK8JHAGV2000A

Overview

S6E2GK8JHAGV2000A from Infineon Technologies (formerly Cypress) is a 32-bit Arm® Cortex®-M4F microcontroller operating at up to 180 MHz, featuring 1024 KB flash, 192 KB SRAM (128 KB + 32 KB + 32 KB), and integrated Ethernet-MAC, USB 2.0 (host/device), CAN, SD card interface, and 32-channel 12-bit ADC. It targets industrial automation and smart metering systems requiring real-time control, connectivity, and deterministic I/O.

For engineers reviewing the S6E2GK8JHAGV2000A datasheet, S6E2GK8JHAGV2000A pinout, S6E2GK8JHAGV2000A application, or S6E2GK8JHAGV2000A equivalent, key selection factors include its 176-pin LQFP package with 153 GPIOs, dual watchdog timers (HW+SW), six low-power modes, and support for MII/RMII Ethernet physical layer interfacing.

Technical Context

The S6E2GK8JHAGV2000A implements an Arm Cortex-M4F core with FPU and MPU, enabling deterministic floating-point computation and memory protection for safety-critical industrial firmware. Its peripheral set includes a 256-channel Descriptor System Transfer Controller (DSTC) for autonomous data movement and a dual-channel USB 2.0 controller supporting simultaneous host and device roles.

It integrates three independent 12-bit ADC units (total 32 channels), quadrature position/revolution counters (QPRC ×2), and a real-time clock with calendar function - all synchronized to a configurable clock tree with six reset sources and clock supervisor (CSV) for robust system initialization and fault recovery.

Key Specifications

Pinout & Package

Package: 176-pin LQFP (0.5 mm pitch), RoHS-compliant, body size 24 mm × 24 mm, thermal pad exposed on bottom (non-electrical).

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar 32-bit industrial microcontroller applications.

Compared with S6E2GM8JHAGV2000A and S6E2GH8JHAGV2000A, the S6E2GK8JHAGV2000A uniquely balances Ethernet-MAC, USB, CAN, and SD card in a single 176-pin LQFP - making it optimal for connected edge devices needing both wired networking and local storage without external glue logic.

Availability

S6E2GK8JHAGV2000A is available at Aetrix Electronics and suitable for industrial PLC modules, smart electricity meters, motor drive control units, and building automation gateways requiring stable component supply, long-term lifecycle support, and qualified automotive-grade reliability.

Supply support for S6E2GK8JHAGV2000A includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Infineon Technologies is a global semiconductor leader headquartered in Munich, Germany, specializing in power systems, sensors, and microcontrollers for industrial, automotive, and IoT applications.

The S6E2G Series belongs to Infineon's FM4 family of Arm Cortex-M4F microcontrollers, designed specifically for deterministic real-time control in industrial automation, energy metering, and motor drive systems where integration, security, and longevity are critical.

FAQ

Does S6E2GK8JHAGV2000A include an integrated Ethernet PHY?

No. The S6E2GK8JHAGV2000A integrates only the Ethernet Media Access Controller (MAC); an external PHY chip is required for physical layer connectivity. It supports both MII (4-bit TX/RX) and RMII (2-bit TX/RX + 50 MHz reference clock) interfaces, allowing flexible PHY selection based on speed, power, and isolation requirements.

What is the maximum operating temperature range for this part?

The S6E2GK8JHAGV2000A is rated for industrial temperature range: –40 °C to +105 °C ambient. This is confirmed in Section 12.2 "Recommended Operating Conditions" of datasheet 001-98708 Rev. *G, and applies to the JHAGV2000A suffix variant with 176-pin LQFP packaging.

Is USB device mode supported without external components?

Yes. The part includes a full-speed (12 Mbps) USB 2.0 transceiver with internal pull-up resistors and voltage regulators. Only a USB connector, ESD protection diodes, and optional series resistors are required - no external PHY or level-shifting ICs are needed for basic USB device operation.

How many independent clock domains does this MCU support?

The S6E2GK8JHAGV2000A supports five independent clock sources: main crystal oscillator (1–20 MHz), sub-crystal (32.768 kHz), high-speed built-in CR (4 MHz ±2%), low-speed built-in CR (100 kHz), and PLL-derived clocks (main PLL, USB/Ethernet PLL). These feed separate peripheral clock trees with individual gating controls.