My Inquiry
My Account
Infineon Technologies SAF-XC164CS-16F20F BB
- Part No.:
- SAF-XC164CS-16F20F BB
- Manufacturer:
- Infineon Technologies
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
SAF-XC164CS-16F20F BB.pdf
- Description:
- IC MCU 16BIT 128KB FLASH 100TQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,451
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SAF-XC164CS-16F20F BB from Infineon Technologies is a 16-bit C166 family microcontroller with 256 KB on-chip Flash, 16 KB RAM, and integrated CAN 2.0B controller. It operates at 20 MHz, supports JTAG debugging, and targets automotive body electronics and industrial motor control systems.
For engineers reviewing the SAF-XC164CS-16F20F BB datasheet, SAF-XC164CS-16F20F BB pinout, SAF-XC164CS-16F20F BB application, or SAF-XC164CS-16F20F BB equivalent, key selection criteria include Flash endurance (10k write/erase cycles), CAN bus timing compliance, real-time interrupt latency (<1 µs), and qualification per AEC-Q100 Grade 2.
Technical Context
This MCU implements the C166S V2 core with 5-stage pipeline and supports deterministic interrupt handling via priority-based vector table. It integrates a 10-bit ADC with 8 channels, 3 capture/compare units for PWM generation, and a watchdog timer with windowed mode.
The on-chip CAN controller supports bit rates up to 1 Mbps, message objects with hardware acceptance filtering, and automatic retransmission. Power management includes idle, sleep, and power-down modes with wake-up via CAN, GPIO, or timer events.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | C166S V2 16-bit RISC core with 5-stage pipeline and 20 MHz max clock |
| Flash Memory | 256 KB on-chip Flash with 10,000 write/erase cycles and 20-year data retention |
| RAM | 16 KB on-chip SRAM with parity protection |
| CAN Interface | One CAN 2.0B controller supporting 1 Mbps bit rate and 32 message objects |
| ADC | 10-bit SAR ADC with 8 input channels and 1.2 µs conversion time |
| Operating Temp | -40°C to +125°C ambient, qualified per AEC-Q100 Grade 2 |
| Supply Voltage | 3.0 V to 5.5 V single supply with internal voltage regulator |
Pinout & Package
SAF-XC164CS-16F20F BB is housed in a 64-pin LQFP package (10 × 10 mm, 0.5 mm pitch) with exposed thermal pad. Pin functions are defined per Infineon's XC164CS datasheet revision 1.1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P0.0–P0.7 | Port 0 bidirectional I/O | General-purpose I/O with alternate functions including CAN RX/TX and timer inputs |
| P1.0–P1.7 | Port 1 bidirectional I/O | Supports external memory interface, ADC trigger, and PWM outputs |
| P2.0–P2.7 | Port 2 bidirectional I/O | Configurable as address/data bus for external memory expansion |
| AD0–AD7 | ADC analog inputs | Dedicated pins for 8-channel 10-bit analog acquisition |
| CANRX / CANTX | CAN physical layer interface | Differential bus interface compliant with ISO 11898-2 for automotive networks |
| XTAL1 / XTAL2 | Crystal oscillator terminals | Supports 1–20 MHz external crystal for system clock generation |
Key Features
| Feature | Design Value |
|---|---|
| On-chip Flash with EEPROM emulation | Enables parameter storage without external non-volatile memory |
| Hardware CAN controller | Offloads CPU from protocol handling and ensures deterministic bus arbitration |
| Real-time interrupt response | Sub-1 µs latency for highest-priority interrupts supports hard real-time control loops |
| AEC-Q100 Grade 2 qualification | Validated for under-hood automotive environments with extended temperature operation |
| JTAG debug interface | Enables full-speed on-chip debugging, flash programming, and boundary scan testing |
Applications
| Automotive Body Control Module | Industrial Brushless DC Motor Drive |
|---|---|
Use Scenario: Centralized control of door locks, windows, mirrors, and lighting in passenger vehicles. IC Role / Device Role / Timing Role: Main application MCU executing CAN-based command routing, sensor polling, and actuator sequencing. Use Value: Integrated CAN 2.0B and AEC-Q100 Grade 2 rating eliminate need for external transceivers and enable direct ECU integration. | Use Scenario: Closed-loop commutation and speed regulation of 3-phase BLDC motors in HVAC blowers and pumps. IC Role / Device Role / Timing Role: Real-time motor control unit generating synchronized PWM signals and sampling current feedback. Use Value: Sub-1 µs interrupt latency and dedicated capture/compare units ensure precise 120° commutation timing at 20 kHz switching frequency. |
| Tractor Implement Controller | Commercial Vehicle Lighting System |
Use Scenario: Hydraulic valve actuation and PTO engagement control in agricultural machinery. IC Role / Device Role / Timing Role: Safety-critical controller managing solenoid drivers and monitoring pressure/position sensors. Use Value: Parity-protected RAM and watchdog with windowed mode support ASIL-B functional safety requirements. | Use Scenario: Adaptive headlight leveling and dynamic brake light modulation in heavy-duty trucks. IC Role / Device Role / Timing Role: CAN gateway and LED driver supervisor coordinating multiple lighting nodes. Use Value: 256 KB Flash accommodates dual-application firmware images for field-upgradable lighting logic. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit automotive MCU applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SAF-XC2264-104F80L AA | 32-bit TriCore core, 80 MHz, 1 MB Flash, dual CAN channels | Higher performance for complex diagnostics and multi-node gateway tasks | Select when migrating to ASIL-D or requiring dual-CAN redundancy |
| SAK-TC1766-128F133HR BA | TriCore V1.6, 133 MHz, 1.2 MB Flash, Ethernet MAC, 3x CAN | Supports AUTOSAR OS and Ethernet backbone integration | Choose for next-gen vehicle domain controllers needing network convergence |
Compared with SAF-XC164CS-16F20F BB, the XC2264 offers higher compute throughput and memory for evolving diagnostic stacks, while the TC1766 adds Ethernet and AUTOSAR readiness-neither provides drop-in compatibility but addresses successive architectural tiers in automotive ECU roadmaps.
Availability
SAF-XC164CS-16F20F BB is available at Aetrix Electronics and suitable for automotive body electronics, industrial motor drives, and commercial vehicle lighting systems requiring stable component supply across long production lifecycles.
Supply support for SAF-XC164CS-16F20F BB includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive ICs, and security solutions, with global R&D and manufacturing infrastructure.
The XC164CS belongs to Infineon's legacy C166-based automotive MCU family, designed specifically for cost-sensitive, high-reliability body and chassis control applications before the TriCore transition.
FAQ
Is SAF-XC164CS-16F20F BB pin-compatible with other XC164 variants?
No. SAF-XC164CS-16F20F BB uses a 64-pin LQFP package with specific pin assignments for CAN, ADC, and memory interface. Pinouts differ from XC164S and XC164CM variants due to differing peripheral sets and signal multiplexing-migration requires PCB redesign and firmware adaptation.
Does this MCU support bootloading over CAN?
Yes. The SAF-XC164CS-16F20F BB includes a ROM-based bootloader accessible via CAN using standardized UDS services (0x31, 0x34, 0x36, 0x37). Bootloader activation requires specific CAN ID sequence and checksum validation per Infineon Application Note AP20012.
What is the maximum operating frequency of the internal oscillator?
The SAF-XC164CS-16F20F BB does not include an internal RC oscillator. It requires an external crystal (1–20 MHz) or clock source connected to XTAL1/XTAL2. System clock is derived directly from this source or multiplied via PLL (if enabled in configuration registers).
Can the on-chip Flash be programmed in-circuit?
Yes. In-system programming (ISP) is supported via JTAG or CAN using Infineon's DAS software tools. Flash sectors can be erased and rewritten while the device remains soldered on the target board, enabling field firmware updates without removing the MCU.
SAF-XC164CS-16F20F BB Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 100-LQFP
- Series:
- XC16x
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- Programmable:
- Not Verified
- Core Processor:
- C166SV2
- Core Size:
- 16-Bit
- Speed:
- 20MHz
- Connectivity:
- CANbus, EBI/EMI, SPI, UART/USART
- Peripherals:
- PWM, WDT
- Number of I/O:
- 79
- Program Memory Size:
- 128KB (128K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 8K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.35V ~ 2.7V
- Data Converters:
- A/D 14x8/10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
SAF-XC164CS-16F20F BB FAQ
1.How can I place an order for SAF-XC164CS-16F20F BB through Aetrix?
Please submit a Request for Quotation (RFQ) for SAF-XC164CS-16F20F BB on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SAF-XC164CS-16F20F BB reliable?
The price and inventory of SAF-XC164CS-16F20F BB are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SAF-XC164CS-16F20F BB is usually 5 days.
3.What payment methods are accepted for SAF-XC164CS-16F20F BB?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SAF-XC164CS-16F20F BB transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SAF-XC164CS-16F20F BB?
SAF-XC164CS-16F20F BB orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SAF-XC164CS-16F20F BB order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SAF-XC164CS-16F20F BB?
For technical support, including SAF-XC164CS-16F20F BB datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SAF-XC164CS-16F20F BB requirements.
6.How does Aetrix verify that SAF-XC164CS-16F20F BB is sourced from the original manufacturer or authorized distributors?
All SAF-XC164CS-16F20F BB products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SAF-XC164CS-16F20F BB meets industry standards.
7.What is the process for return or replacement of SAF-XC164CS-16F20F BB?
All SAF-XC164CS-16F20F BB units undergo pre-shipment inspection (PSI). If there is an issue with SAF-XC164CS-16F20F BB, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SAF-XC164CS-16F20F BB part is unused and in its original packaging.
Return procedure for SAF-XC164CS-16F20F BB:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SAF-XC164CS-16F20F BB Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
