My Inquiry
My Account
Diodes Incorporated AP7115-30SEG-7
- Part No.:
- AP7115-30SEG-7
- Manufacturer:
- Diodes Incorporated
- Package:
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet:
-
AP7115-30SEG-7.pdf
- Description:
- IC REG LINEAR 3V 150MA SOT353
- Quantity:
- Payment:
- Shipping:
Inventory:2,263
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP7115-30SEG-7 from Diodes Incorporated is a 150mA fixed-output (3.0V) low-dropout linear regulator in SOT353 package, featuring 200mV dropout at full load, ±2% output voltage accuracy, and 50µA quiescent current. It integrates current-limit, thermal shutdown, and enable control for battery-powered wireless handsets and portable peripherals.
For engineers reviewing the AP7115-30SEG-7 datasheet, AP7115-30SEG-7 pinout, AP7115-30SEG-7 application, or AP7115-30SEG-7 equivalent, key selection criteria include dropout performance at 150mA, EN-controlled shutdown behavior, BP bypass capacitor requirements, and thermal derating in SOT353 layout.
Technical Context
The AP7115-30SEG-7 uses a PMOS pass element with bandgap reference and error amplifier feedback to regulate 3.0V output across 2.5–5.5V input. Its internal current-limit circuit clamps output at 200–250mA and enables indefinite short-circuit survival without damage.
Thermal shutdown activates at +150°C junction temperature with 30°C hysteresis, and the BP pin accepts a 0.1µF ceramic capacitor to reduce output noise by stabilizing the bandgap reference node.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 3.0V ±2% over -40°C to +85°C ambient and 1–150mA load |
| Dropout Voltage | 200mV typical at 150mA - enables regulation from 3.2V input in 3.0V systems |
| Quiescent Current | 50µA typical at zero load - extends battery life in always-on standby modes |
| EN Pin Threshold | VIH = 2.0V min, VIL = 0.7V max - compatible with 1.8V/3.3V logic without level shift |
| PSRR | 70dB at 1kHz - suppresses ripple from noisy DC-DC converter inputs |
| Thermal Shutdown | Activates at +150°C junction, auto-recovers after 30°C cooldown - prevents permanent damage during overload |
| Output Noise | 50µVrms (10Hz–100kHz) - suitable for RF power supply rails and precision analog subsystems |
Pinout & Package
SOT353 (5-pin, 2.15mm × 2.10mm × 0.90mm) surface-mount package with exposed pad not electrically connected; JEDEC-compliant footprint per Diodes Inc. outline drawing SOT353.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 IN | Input voltage supply | Accepts 2.5–5.5V; requires 1µF ceramic decoupling to GND |
| 2 GND | Ground reference | Common return path for input/output capacitors and BP bypass |
| 3 EN | Enable control input | Active-high logic; drives high to enable regulator, low to reduce shutdown current to 0.1µA |
| 4 BP | Bandgap reference bypass | Connects 0.1µF ceramic capacitor to GND to reduce output voltage noise and improve stability |
| 5 OUT | Regulated output | Delivers up to 150mA at 3.0V; requires ≥1µF ceramic output capacitor with ESR <1Ω |
Key Features
| Feature | Design Value |
|---|---|
| Low dropout architecture | 200mV @ 150mA enables single-cell Li-ion (3.0–4.2V) and 3.3V rail regulation without headroom loss |
| Ultra-low quiescent current | 50µA typical ensures >1-year battery life in 10µA sleep-mode IoT sensors powered by CR2032 |
| Integrated protection suite | Current limit (250mA typ), thermal shutdown (+150°C), and short-circuit survival eliminate need for external fault management |
| High PSRR & low noise | 70dB PSRR at 1kHz and 50µVrms noise support clean power for GSM transceivers and ADC references |
| Green packaging | SOT353 package is halogen-free, antimony-free, and fully RoHS-compliant per EU Directive 2011/65/EU |
Applications
| GSM/GPRS Handset Power Rail | USB Peripheral LDO Supply |
|---|---|
|
Use Scenario: Regulating 3.3V USB VBUS down to stable 3.0V for baseband processor I/O and SIM card interface in compact mobile handsets. IC Role / Device Role / Timing Role: Primary LDO supplying critical digital I/O domain with fast transient response to burst data traffic. Use Value: 200mV dropout preserves margin under USB voltage sag; 50µA IQ minimizes standby drain during call idle states. |
Use Scenario: Providing clean 3.0V power to USB-to-UART bridge ICs and flash memory in docking stations and card readers. IC Role / Device Role / Timing Role: Post-regulator isolating noise-sensitive logic from switching USB power sources. Use Value: 70dB PSRR rejects 1MHz switching noise from upstream DC-DC; 50µVrms output noise prevents UART bit errors. |
| Wireless Sensor Node Core Supply | CD-ROM/DVD Drive Servo Control |
|
Use Scenario: Powering ultra-low-power microcontrollers and BLE radios in coin-cell–powered environmental sensors. IC Role / Device Role / Timing Role: Always-on system LDO enabling sub-µA deep-sleep modes while maintaining RTC and wake-up circuitry. Use Value: 0.1µA shutdown current extends CR2032 life beyond 5 years; ±2% accuracy ensures reliable brown-out detection. |
Use Scenario: Delivering regulated 3.0V to laser diode driver and spindle motor control ICs in optical disc drives. IC Role / Device Role / Timing Role: Precision analog supply for servo loop amplifiers requiring low drift and minimal ripple. Use Value: 50ppm/°C output tempco maintains servo gain stability across 0–70°C operating range; BP bypass reduces jitter in analog feedback paths. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-output LDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCP1700T-3002E/MB | 300mA rated, 170mV dropout, 2.0µA IQ - higher current but lower quiescent current | Lacks EN and BP pins; no shutdown control or noise-reduction bypass capability | Choose when higher output current is required and EN/BP features are unnecessary |
| AP7315-30SAG-7 | Same manufacturer, pin-compatible SOT25 variant - identical electrical specs, different package thermal resistance (θJA = 200°C/W vs. 337°C/W) | SOT25 offers better thermal performance for continuous 150mA operation in confined PCB areas | Choose when board space allows SOT25 and thermal dissipation exceeds 250mW |
Compared with MCP1700T-3002E/MB, AP7115-30SEG-7 provides enable control and BP noise filtering at the cost of higher IQ; versus AP7315-30SAG-7, it trades thermal performance for smaller footprint in space-constrained designs.
Availability
AP7115-30SEG-7 is available at Aetrix Electronics and suitable for GSM handset power rails, USB peripheral LDO supplies, and wireless sensor node core supplies requiring stable component supply with guaranteed long-term traceability.
Supply support for AP7115-30SEG-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor company specializing in discrete, analog, and mixed-signal devices, with design and manufacturing operations across Asia, the US, and Europe.
The AP7115 product line delivers ultra-low-IQ, enable-capable LDOs optimized for battery-powered portable electronics where size, efficiency, and reliability are critical.
FAQ
What is the minimum input voltage required for AP7115-30SEG-7 to maintain 3.0V output at 150mA?
The minimum input voltage is 3.2V, calculated as VOUT + VDO = 3.0V + 0.2V. At 150mA load, the device sustains regulation down to this headroom; below it, output voltage drops linearly with input. Input must remain ≥2.5V for functional enable and bias, but regulation ceases below 3.2V under full load.
Can the BP pin be left floating or tied directly to OUT?
No - the BP pin must be connected to a 0.1µF ceramic capacitor between BP and GND. Floating BP degrades output voltage accuracy and increases noise; connecting BP to OUT creates instability and may cause oscillation due to unintended feedback path into the bandgap reference node.
How does thermal shutdown behave during sustained overload?
When junction temperature reaches +150°C, the regulator disables the pass element and holds output at 0V until temperature falls by ~30°C. Recovery is automatic with no external reset needed. During repeated cycling, average output current is limited by ambient temperature and PCB copper area, not by datasheet-rated 150mA.
Is AP7115-30SEG-7 suitable for powering RF sections like GSM PA bias rails?
Yes - its 50µVrms output noise and 70dB PSRR at 1kHz make it appropriate for RF power supply filtering. However, ensure BP bypass capacitor placement minimizes loop inductance, and use separate 1µF input/output ceramics with low-ESR construction to avoid modulation artifacts in transmit bursts.
AP7115-30SEG-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 5-TSSOP, SC-70-5, SOT-353
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 5.5V
- Voltage - Output (Min/Fixed):
- 3V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.3V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 80 µA
- Current - Supply (Max):
- -
- PSRR:
- 70dB (1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-353
AP7115-30SEG-7 FAQ
1.How can I place an order for AP7115-30SEG-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP7115-30SEG-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP7115-30SEG-7 reliable?
The price and inventory of AP7115-30SEG-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP7115-30SEG-7 is usually 5 days.
3.What payment methods are accepted for AP7115-30SEG-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP7115-30SEG-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP7115-30SEG-7?
AP7115-30SEG-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP7115-30SEG-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP7115-30SEG-7?
For technical support, including AP7115-30SEG-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP7115-30SEG-7 requirements.
6.How does Aetrix verify that AP7115-30SEG-7 is sourced from the original manufacturer or authorized distributors?
All AP7115-30SEG-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP7115-30SEG-7 meets industry standards.
7.What is the process for return or replacement of AP7115-30SEG-7?
All AP7115-30SEG-7 units undergo pre-shipment inspection (PSI). If there is an issue with AP7115-30SEG-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP7115-30SEG-7 part is unused and in its original packaging.
Return procedure for AP7115-30SEG-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP7115-30SEG-7 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
