My Inquiry
My Account
Diodes Incorporated AP7583Q-MP-13
- Part No.:
- AP7583Q-MP-13
- Manufacturer:
- Diodes Incorporated
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Datasheet:
-
AP7583Q-MP-13.pdf
- Description:
- LDO CMOS LOWCURR MSOP-8EP T&R 2.
- Quantity:
- Payment:
- Shipping:
Inventory:1,825
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP7583Q-MP-13 from Diodes Incorporated is an AEC-Q100 qualified 300mA ultra-low-quiescent-current LDO regulator with 3V–42V input range, 3.3V fixed output, 2.5µA typical IQ, and 320mV dropout at 300mA - designed for always-on automotive subsystems including MCU core rails and CAN transceiver power supplies.
For engineers reviewing the AP7583Q-MP-13 datasheet, AP7583Q-MP-13 pinout, AP7583Q-MP-13 application, or AP7583Q-MP-13 equivalent, this part supports critical low-power, high-reliability vehicle electronics where wide VIN tolerance, thermal robustness, and precise voltage regulation under light-load conditions are mandatory.
Technical Context
The AP7583Q integrates a precision 1.207V reference, error amplifier, current-limit circuit, thermal shutdown protection, and chip-enable logic in a single monolithic IC. Its architecture delivers ±1.5% output accuracy across -40°C to +125°C and maintains stability with ceramic capacitors as low as 4.7µF.
It operates without minimum load requirement and features EN-controlled startup with 0.8ms turn-on delay and 200µs output ramp time. The device implements internal current limiting (310–690mA), thermal cycling protection (175°C trip, 20°C hysteresis), and UVLO (2.4V nominal enable threshold).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 3V to 42V - supports direct connection to automotive battery rail with cold-crank and load-dump immunity. |
| Output Voltage | Fixed 3.3V ±1.5% - meets MCU I/O and CAN transceiver VCC requirements without external feedback resistors. |
| Max Output Current | 300mA - sufficient for dual-core microcontrollers and integrated CAN/LIN transceivers in body control modules. |
| Dropout Voltage | 320mV @300mA - enables stable 3.3V output even when VIN drops to 3.62V, critical during engine cranking. |
| Quiescent Current | 2.5µA typ - minimizes standby power loss in always-on domains such as alarm systems and remote keyless entry receivers. |
| Thermal Shutdown | 175°C trip temperature - protects against sustained overloads in enclosed ECUs with limited airflow. |
| PSRR | 70dB @100Hz - suppresses alternator ripple and switching noise from adjacent DC/DC converters. |
Pinout & Package
AP7583Q-MP-13 uses the MSOP-8EP package (3.0mm × 4.9mm × 1.1mm) with exposed thermal pad. PCB layout requires large copper area connected to GND under the EP for optimal thermal dissipation (θJA = 36.1°C/W).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 VIN | Input supply connection | Accepts 3–42V unregulated automotive battery; must be decoupled with ≥10µF ceramic capacitor placed adjacent to pin. |
| 2 EN | Enable control input | Active-high logic interface (VIH ≥1.7V); ties to VIN for permanent ON operation; supports controlled power sequencing. |
| 3,7 NC | No-connect terminal | Internally unconnected; recommended to tie to GND for enhanced thermal conduction via PCB copper fill. |
| 4,5 GND | Ground reference | Dual ground pins reduce impedance path for return current and improve PSRR performance. |
| 6 VOUT | Regulated output | Delivers stable 3.3V ±1.5%; requires ≥4.7µF ceramic output capacitor; supports up to 300mA continuous load. |
| 8 EP | Exposed thermal pad | Not electrically functional; must be soldered to GND plane for thermal management - not used as primary GND electrode. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 2.5µA typ enables >10-year battery life in always-on vehicle modules powered by 12V lead-acid batteries. |
| Wide input voltage range | 3V–42V operation accommodates automotive transients including ISO 7637-2 pulse 5a (load dump up to 40V) without external clamping. |
| Low dropout voltage | 320mV @300mA ensures regulation during cold-crank events where battery dips below 6V while maintaining 3.3V system rail. |
| Integrated thermal shutdown | 175°C trip with 20°C hysteresis prevents latch-up during short-circuit faults and allows safe auto-recovery in thermally constrained enclosures. |
| AEC-Q100 qualification | Qualified to Grade 1 (-40°C to +125°C) with PPAP capability and IATF16949 manufacturing - suitable for safety-critical body and powertrain ECUs. |
Applications
| Automotive Body Control Module (BCM) | Engine Control Unit (ECU) Standby Rail |
|---|---|
|
Use Scenario: Powering microcontroller peripherals, LIN transceivers, and sensor interfaces in door modules and lighting controllers. IC Role / Device Role / Timing Role: Primary 3.3V LDO supplying always-on logic and wake-up circuitry with minimal parasitic drain. Use Value: 2.5µA IQ extends vehicle sleep-mode battery life beyond 30 days without recharge, meeting OEM parasitic draw specifications. |
Use Scenario: Providing auxiliary 3.3V supply to ECU watchdog timers, CAN interface buffers, and non-volatile memory during ignition-off state. IC Role / Device Role / Timing Role: Secondary regulated rail enabling fast wake-up response and secure firmware retention after key-off. Use Value: 320mV dropout ensures uninterrupted operation down to 3.62V battery voltage, preventing brown-out resets during cranking. |
| CAN Transceiver Power Supply | EV Battery Management System (BMS) Monitoring Node |
|
Use Scenario: Dedicated 3.3V rail for high-speed CAN FD transceivers in gateway and domain controllers. IC Role / Device Role / Timing Role: Low-noise, high-PSRR local regulator isolating transceiver VCC from noisy main DC/DC outputs. Use Value: 70dB PSRR at 100Hz attenuates alternator ripple, reducing bit error rate in CAN communication under charging conditions. |
Use Scenario: Powering cell monitoring ICs and isolated ADCs in high-voltage BMS slave boards operating from 12V auxiliary supply. IC Role / Device Role / Timing Role: Input-tolerant LDO delivering clean 3.3V to precision analog front-ends despite wide battery voltage swings. Use Value: ±1.5% output accuracy ensures consistent ADC reference scaling across temperature, improving SOC estimation fidelity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar automotive LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AP7583AQ-MP-13 | Includes open-drain PG output (90% VOUT threshold); 3µA IQ vs. 2.5µA | Required where power sequencing or supply monitoring is needed (e.g., multi-rail ECUs) | Select AQ version if system-level fault detection or coordinated power-up/down timing is required. |
| TLE42744G V33 | Higher IQ (15µA), lower max current (250mA), same AEC-Q100 Grade 1 rating | Suitable for simpler, lower-current nodes but lacks ultra-low-IQ advantage for long-term standby | Choose TLE42744G only when legacy Infineon footprint compatibility is mandatory and IQ budget allows. |
Compared with AP7583AQ-MP-13, the Q version trades PG functionality for 0.5µA lower IQ - critical for multi-month battery-off endurance. Versus TLE42744G, AP7583Q delivers 20% higher current capacity and one-sixth the quiescent current, making it superior for next-gen low-power automotive nodes.
Availability
AP7583Q-MP-13 is available at Aetrix Electronics and suitable for automotive body control modules, EV battery monitoring nodes, CAN transceiver power supplies, and engine ECU standby rails requiring stable component supply across extended temperature and lifecycle demands.
Supply support for AP7583Q-MP-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor manufacturer specializing in discrete, analog, and mixed-signal solutions for automotive, industrial, and consumer markets, with IATF16949-certified production facilities.
The AP7583Q belongs to Diodes' automotive-grade ultra-low-IQ LDO product line, engineered specifically for always-on vehicle electronics demanding AEC-Q100 compliance, wide-input resilience, and sub-3µA quiescent operation.
FAQ
What is the minimum input voltage required for AP7583Q-MP-13 to regulate 3.3V output at full 300mA load?
The dropout voltage is 320mV typ at 300mA, so minimum VIN = 3.3V + 0.32V = 3.62V. This ensures regulation during cold-crank events where battery voltage may dip below 6V. Absolute minimum VIN per datasheet is 3.0V, but output will drop out below 3.62V under full load.
Can AP7583Q-MP-13 operate without an external output capacitor?
No - a minimum 4.7µF ceramic output capacitor is required for stability. The device is optimized for 10µF, and operation outside 4.7–100µF may cause oscillation or poor transient response. No minimum load current is needed, but capacitor is mandatory.
Is the EN pin 5V-tolerant when used with a 12V automotive microcontroller GPIO?
No - VIH is specified as 1.7V to VIN, and maximum EN voltage is VIN. Direct connection to 12V GPIO would exceed absolute maximum ratings. Use a level-shifting resistor divider or buffer to limit EN voltage to ≤VIN (max 42V) and ensure VIH ≥1.7V.
Does AP7583Q-MP-13 require thermal derating above +85°C ambient?
Yes - θJA is 36.1°C/W on JEDEC-standard board. At TA = +85°C, maximum allowable power dissipation before reaching TJ = +125°C is PD = (125–85)/36.1 ≈ 1.11W. For VIN = 14V and VOUT = 3.3V, max sustainable IOUT = 1.11W / (14–3.3) ≈ 104mA above +85°C.
AP7583Q-MP-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Adjustable
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 42V
- Voltage - Output (Min/Fixed):
- 1.2V
- Voltage - Output (Max):
- 5V
- Voltage Dropout (Max):
- 0.7V @ 300mA
- Current - Output:
- 300mA
- Current - Quiescent (Iq):
- 4 µA
- Current - Supply (Max):
- -
- PSRR:
- 70dB (100Hz)
- Control Features:
- Current Limit, Enable
- Protection Features:
- Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-MSOP-EP
AP7583Q-MP-13 FAQ
1.How can I place an order for AP7583Q-MP-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP7583Q-MP-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP7583Q-MP-13 reliable?
The price and inventory of AP7583Q-MP-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP7583Q-MP-13 is usually 5 days.
3.What payment methods are accepted for AP7583Q-MP-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP7583Q-MP-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP7583Q-MP-13?
AP7583Q-MP-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP7583Q-MP-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP7583Q-MP-13?
For technical support, including AP7583Q-MP-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP7583Q-MP-13 requirements.
6.How does Aetrix verify that AP7583Q-MP-13 is sourced from the original manufacturer or authorized distributors?
All AP7583Q-MP-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP7583Q-MP-13 meets industry standards.
7.What is the process for return or replacement of AP7583Q-MP-13?
All AP7583Q-MP-13 units undergo pre-shipment inspection (PSI). If there is an issue with AP7583Q-MP-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP7583Q-MP-13 part is unused and in its original packaging.
Return procedure for AP7583Q-MP-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP7583Q-MP-13 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
