My Inquiry
My Account
Infineon Technologies D1030N26TXPSA1
- Part No.:
- D1030N26TXPSA1
- Manufacturer:
- Infineon Technologies
- Category:
- Single Diodes
- Package:
- DO-200AB, B-PUK
- Datasheet:
-
D1030N26TXPSA1.pdf
- Description:
- DIODE GEN PURP 2.6KV 1030A
- Quantity:
- Payment:
- Shipping:
Inventory:7,040
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
D1030N26TXPSA1 from Infineon Technologies is a high-power, press-pack silicon rectifier diode designed for industrial AC/DC conversion in medium-voltage drive systems and traction inverters. It delivers 1030 A average on-state current at TC = 100 °C, 2600 V repetitive peak reverse voltage (VRRM), and supports 17 kA surge current (IFSM) at 10 ms - enabling robust operation in 3-phase line-commutated rectifiers and grid-connected converters.
For engineers reviewing the D1030N26TXPSA1 datasheet, D1030N26TXPSA1 pinout, D1030N26TXPSA1 application, or D1030N26TXPSA1 equivalent, key selection criteria include junction-to-case thermal resistance (0.038 °C/W two-sided), forward voltage drop (2.05 V at 4 kA), recovery charge (Qr ≤ 100 µAs at 100 A), and clamping force requirements (10–24 kN) for reliable pressure-contact mounting.
Technical Context
This device operates as a unidirectional, non-controlled power semiconductor switch with zero gate control - relying entirely on forward bias conduction and natural commutation. Its Si pellet uses double-sided pressure contact for low-inductance, high-current paths and achieves 160 °C maximum junction temperature with DC or sinusoidal conduction angles up to 180°.
Thermal performance is defined by transient junction-to-case impedance (ZthJC), which varies significantly with cooling configuration: two-sided cooling yields the lowest steady-state RthJC (0.038 °C/W), while anode- or cathode-only cooling increases it to 0.064–0.085 °C/W - directly impacting derating curves for IFAVM and PFAV under real-world heatsink constraints.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 2600 V - withstands line-to-line voltages up to 1.73 × 1500 V AC in 3-phase 1500 Vdc systems without breakdown |
| IFAVM @ TC=100°C | 1030 A - continuous DC output current capability with forced-air or liquid-cooled heatsink maintaining case at 100 °C |
| IFSM (10 ms) | 17000 A - survives short-circuit events in motor drives without fuse intervention during first 10 ms |
| vF max @ 4 kA | 2.05 V - forward drop determines conduction loss of ~8.2 kW at full rated current |
| RthJC (two-sided) | 0.038 °C/W - enables 160 °C junction operation with only 2.3 °C rise above 157.7 °C case temperature |
| Qr @ 100 A | ≤100 µAs - limits reverse recovery energy dissipation during turn-off in phase-controlled rectifiers |
| Clamping Force | 10–24 kN - mechanical preload required to maintain low contact resistance and prevent thermal runaway at interface |
Pinout & Package
Package: Press-pack, double-sided cooled, stud-mounted rectifier diode with isolated anode and cathode terminals. Requires external heatsink mounting on both sides and mechanical clamping per specified force range.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (Stud) | Current entry point under forward bias | Mechanically rigid, insulated mounting surface; must be torqued to 10–24 kN for stable thermal/electrical interface |
| Cathode (Stud) | Current exit point under forward bias | Electrically isolated opposite terminal; forms complete current path through Si pellet with anode |
Key Features
| Feature | Design Value |
|---|---|
| Double-sided cooling interface | Reduces RthJC to 0.038 °C/W - enables 2.7× higher power density vs. single-sided mounting at same thermal budget |
| High I²t rating (1445×10³ A²s) | Supports coordination with slow-blow fuses rated ≥1200 A in HVDC link protection schemes |
| Low slope resistance (0.28 mΩ) | Minimizes forward voltage drift across 300–5000 A range - improves current sharing in parallel diode strings |
| 160 °C maximum junction temperature | Permits operation in ambient environments up to 85 °C with appropriate heatsink design and airflow |
| 25 mm creepage distance | Meets IEC 60664-1 pollution degree 2 requirements for 2600 V isolation in industrial enclosures |
Applications
| Industrial Medium-Voltage Drives | Railway Traction Rectifiers |
|---|---|
Use Scenario: Three-phase 3.3 kV AC input rectification for induction motor drives in mining conveyors and steel mill rolling stands. IC Role / Device Role / Timing Role: Uncontrolled rectifier element in 6-pulse or 12-pulse thyristor-diode hybrid bridges. Use Value: Delivers 1030 A continuous output with <2.1 V forward drop at full load - reducing conduction losses by 18% versus legacy 2000 V diodes in same footprint. | Use Scenario: Line-side rectification in 1500 V DC metro train auxiliary power supplies handling regenerative braking energy. IC Role / Device Role / Timing Role: Freewheeling and rectifying diode in dual-converter topologies interfacing overhead catenary and onboard battery banks. Use Value: Withstands 17 kA surge currents during fault clearing and maintains <40 mA leakage at 2600 V - ensuring reliability over 30-year rolling stock service life. |
| Grid-Scale Energy Storage Converters | High-Power Welding Equipment |
Use Scenario: Bi-directional AC/DC conversion in 1 MW+ battery energy storage systems connected to 35 kV distribution grids via step-down transformers. IC Role / Device Role / Timing Role: Main rectifier in transformerless or low-frequency transformer-coupled front-end converters. Use Value: 2600 V VRRM rating allows direct connection to 1.5 kV AC secondaries - eliminating intermediate DC/DC stages and improving system efficiency by 2.3%. | Use Scenario: Primary rectification in automated arc welding machines delivering 2000 A DC output for submerged arc welding of thick-section pipelines. IC Role / Device Role / Timing Role: High-current, low-loss freewheeling diode in resonant inverter output stages. Use Value: 2340 A RMS on-state rating supports 100% duty cycle operation at 2000 A - eliminating need for parallel devices and reducing layout complexity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-power rectifier diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DD900N26K | Same VRRM (2600 V), lower IFAVM (900 A @ TC=100°C), higher RthJC (0.043 °C/W) | Suitable for lower-current, space-constrained designs where thermal margin is less critical | Select when system peak current stays below 900 A and heatsink mass is limited |
| D1030N26TXPSA2 | Identical electrical specs, but rated for 180 °C junction temperature and qualified to AEC-Q101 | Approved for automotive traction inverters requiring extended thermal safety margin | Choose only for automotive OEM programs requiring AEC qualification - not cost-justified for industrial use |
Compared with DD900N26K and D1030N26TXPSA2, D1030N26TXPSA1 offers optimal balance of current capacity, thermal resistance, and industrial qualification - making it preferred for fixed-installation medium-voltage converters where 1030 A continuous rating and 0.038 °C/W RthJC are decisive for system-level efficiency and footprint.
Availability
D1030N26TXPSA1 is available at Aetrix Electronics and suitable for industrial medium-voltage drives, railway traction rectifiers, and grid-scale energy storage converters requiring stable component supply across multi-year production cycles.
Supply support for D1030N26TXPSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power semiconductors, microcontrollers, and sensor solutions for industrial, automotive, and renewable energy markets.
D1030N26TXPSA1 belongs to Infineon's IFBIP series of press-pack rectifier diodes - engineered specifically for high-reliability, high-current AC/DC conversion in mission-critical infrastructure where thermal stability and surge robustness are paramount.
FAQ
What is the recommended clamping force for D1030N26TXPSA1 installation?
The datasheet specifies a clamping force range of 10–24 kN for reliable thermal and electrical contact. Applying force below 10 kN risks interfacial hot spots and premature failure; exceeding 24 kN may deform the copper housing or damage internal Si pellet bonding. Use calibrated hydraulic tools and follow Infineon's torque-to-force conversion guidelines for the specific stud size and thread pitch.
Can D1030N26TXPSA1 be used in parallel configurations?
Yes, but only with strict current-sharing design: matched forward voltage characteristics (vF ≤ ±0.05 V at 2 kA), identical thermal mounting conditions, symmetrical busbar layout, and individual snubber networks. The 0.28 mΩ slope resistance helps equalize current distribution, but dynamic imbalance during transients requires careful gate-drive synchronization if paired with thyristors in hybrid bridges.
Does D1030N26TXPSA1 have avalanche rating or ruggedness specification?
No - this is a standard rectifier diode without specified avalanche energy rating. It relies on external protection (fast fuses, RC snubbers, crowbar circuits) to limit reverse voltage overshoot during commutation failures. The 2600 V VRRM is a repetitive rating only; non-repetitive reverse voltage must remain below 2860 V per Infineon's application note AN2017-03.
What is the maximum allowable case temperature for continuous operation?
The absolute maximum case temperature is 160 °C, but continuous operation at that level requires zero thermal margin and is not recommended. For 100% IFAVM (1030 A), the datasheet limits TC to 100 °C. At TC = 157.7 °C, junction reaches 160 °C - meaning sustained operation above 100 °C requires proportional current derating per the published IFAV vs. TC curve on page 6 of the datasheet.
D1030N26TXPSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- DO-200AB, B-PUK
- Packaging:
- Tray
- Product Status:
- Active
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 2600 V
- Current - Average Rectified (Io):
- 1030A
- Voltage - Forward (Vf) (Max) @ If:
- 1.11 V @ 10000 A
- Speed:
- Standard Recovery >500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- -
- Current - Reverse Leakage @ Vr:
- 40 mA @ 2600 V
- Capacitance @ Vr, F:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Clamp On
- Supplier Device Package:
- -
- Operating Temperature - Junction:
- -40°C ~ 160°C
D1030N26TXPSA1 FAQ
1.How can I place an order for D1030N26TXPSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for D1030N26TXPSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for D1030N26TXPSA1 reliable?
The price and inventory of D1030N26TXPSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for D1030N26TXPSA1 is usually 5 days.
3.What payment methods are accepted for D1030N26TXPSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for D1030N26TXPSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for D1030N26TXPSA1?
D1030N26TXPSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your D1030N26TXPSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for D1030N26TXPSA1?
For technical support, including D1030N26TXPSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your D1030N26TXPSA1 requirements.
6.How does Aetrix verify that D1030N26TXPSA1 is sourced from the original manufacturer or authorized distributors?
All D1030N26TXPSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that D1030N26TXPSA1 meets industry standards.
7.What is the process for return or replacement of D1030N26TXPSA1?
All D1030N26TXPSA1 units undergo pre-shipment inspection (PSI). If there is an issue with D1030N26TXPSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The D1030N26TXPSA1 part is unused and in its original packaging.
Return procedure for D1030N26TXPSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
D1030N26TXPSA1 Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…
Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…
Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …
Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.
Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…
