My Inquiry
My Account
Vishay Siliconix DG2301DL-T1-E3
- Part No.:
- DG2301DL-T1-E3
- Manufacturer:
- Vishay Siliconix
- Package:
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet:
-
DG2301DL-T1-E3.pdf
- Description:
- IC SWITCH SPST-NOX1 7OHM SC70-5
- Quantity:
- Payment:
- Shipping:
Inventory:2,354
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG2301DL-T1-E3 from Vishay Siliconix is a high-speed, single-pole single-throw (SPST) analog bus switch in SC-70-5 package, featuring 7 Ω typical on-resistance at 4.5 V, <1 ns propagation delay, and TTL-compatible control inputs. It enables bidirectional signal routing between ports A and B under OE control for low-latency data path switching in portable logic systems.
For engineers reviewing the DG2301DL-T1-E3 datasheet, DG2301DL-T1-E3 pinout, DG2301DL-T1-E3 application, or DG2301DL-T1-E3 equivalent, key selection criteria include guaranteed 7 Ω rON at 4.5 V, sub-5 ns enable/disable timing, 50 pF load-driven AC performance, and SC-70 footprint compatibility with space-constrained PCB layouts.
Technical Context
The DG2301DL-T1-E3 implements a CMOS transmission gate architecture with rail-to-rail analog signal handling up to V+ = 5.5 V. Its OE-controlled switch operates bidirectionally between A and B terminals without polarity constraints, supporting flow-through mode with zero contact bounce.
Dynamic behavior is defined by RC-limited propagation (tPHL/tPLH ≤ 1 ns) and fast enable/disable transitions (tPZL ≤ 4.5 ns, tPHZ ≤ 1.0 ns), all specified across -40 °C to +85 °C with 4.0 V to 5.5 V supply range and 50 pF capacitive load per AC test circuit Figure 1.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| On-Resistance (rON) | 7 Ω typical at V+ = 4.5 V, VA = 0 V, IB = 64 mA - ensures minimal voltage drop and signal attenuation in 3.3 V/5 V logic paths |
| Propagation Delay | 1 ns max (tPHL/tPLH) - supports >500 MHz data rate in short-reach digital interconnects |
| Enable/Disable Time | tPZL ≤ 4.5 ns, tPHZ ≤ 1.0 ns at V+ = 4.0 V - enables precise timing control in synchronous bus gating |
| Supply Range | 4.0 V to 5.5 V - compatible with standard 3.3 V I/O domains via level-shifting interfaces |
| Input Leakage | ±10 µA max (IIL/IIH) - reduces standby power impact in battery-operated systems |
| Channel Capacitance | C(ON) = 11 pF, C(OFF) = 5 pF - minimizes crosstalk and maintains signal integrity in high-speed routing |
Pinout & Package
Package: SC-70-5 (SOT-353), 1.25 mm × 2.1 mm footprint, 0.65 mm pitch, RoHS-compliant lead finish (Pb-free).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 - V+ | Positive supply rail | Provides operating voltage (4.0–5.5 V); internal ESD clamps limit input overvoltage to V+ + 0.3 V |
| 2 - OE | Output enable control | TTL-compatible active-low logic input; OE = L connects A↔B, OE = H isolates ports |
| 3 - A | Bidirectional analog/data port | Signal terminal with ±50 mA continuous rating; no polarity restriction for AC/DC signals |
| 4 - GND | Ground reference | Return path for supply and signal currents; must be low-impedance for noise immunity |
| 5 - B | Bidirectional analog/data port | Second signal terminal; identical electrical characteristics to Pin 3 (A) |
Key Features
| Feature | Design Value |
|---|---|
| Zero-bounce switching | Eliminates mechanical contact artifacts in flow-through mode-critical for glitch-free clock/data gating |
| Sub-1 ns propagation | Enables timing-critical applications such as high-speed memory address multiplexing without added skew |
| 5 Ω switch resistance | Reduces insertion loss below 0.1 dB in 50 Ω systems, preserving signal fidelity in RF-adjacent digital paths |
| TTL-level OE input | Direct interface with legacy 5 V microcontrollers and FPGAs without external level shifters |
| SC-70-5 footprint | Supports ultra-dense routing in handheld and wearable electronics where board area is constrained |
Applications
| Mobile Baseband Processing | USB 2.0 Data Line Switching |
|---|---|
Use Scenario: Routing I²C or UART signals between AP and modem subsystems during power-state transitions. IC Role / Device Role / Timing Role: Bidirectional bus switch enabling dynamic isolation of shared serial lines to prevent leakage and contention. Use Value: 7 Ω rON and 1 ns delay maintain signal rise/fall times within USB 2.0 full-speed timing budget while reducing standby current by >90 %. | Use Scenario: Selecting between host and device PHY connections in dual-role USB ports. IC Role / Device Role / Timing Role: SPST analog switch controlled by USB ID pin or system GPIO to reconfigure D+/D− path directionality. Use Value: 5 pF C(OFF) limits crosstalk between alternate paths; SC-70 package fits tight spacing around USB connectors. |
| Low-Power Sensor Hub Multiplexing | Industrial PLC Digital I/O Expansion |
Use Scenario: Sharing a single ADC input among multiple analog sensors (temperature, humidity, pressure) in battery-powered IoT nodes. IC Role / Device Role / Timing Role: Low-leakage analog switch providing channel selection with <10 µA off-state current to preserve sensor bias stability. Use Value: 11 pF C(ON) minimizes settling time; 4.0–5.5 V operation matches common sensor supply rails. | Use Scenario: Isolating field-side digital inputs from controller-side logic during hot-swap or fault conditions in modular I/O racks. IC Role / Device Role / Timing Role: Fast-enable switch inserted in discrete input signal path to decouple modules without relay latency. Use Value: tPZL ≤ 4.5 ns allows sub-microsecond response to safety triggers; ±50 mA rating handles 24 V sink/source loads with external buffering. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog bus switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NLAS3101MUTAG | Higher rON (12 Ω typ), slower tPHL (3 ns), same SC-70-5 package | Lower bandwidth suitability; limited to ≤100 MHz data rates | Select when cost sensitivity outweighs speed requirement and 12 Ω rON is acceptable |
| Texas Instruments SN74CBT3125PW | SOIC-14 package, 4-channel, 5 Ω rON, but requires 4.5–5.5 V only | Not foot-print compatible; suited for multi-channel board-level switching rather than single-line density optimization | Choose for designs needing four independent switches with identical rON, accepting larger PCB area |
Compared with NLAS3101MUTAG and SN74CBT3125PW, the DG2301DL-T1-E3 uniquely balances sub-1 ns timing, 7 Ω conduction, and SC-70-5 miniaturization-making it optimal for single-line, space-constrained, high-speed signal routing where layout density and propagation delay are critical.
Availability
DG2301DL-T1-E3 is available at Aetrix Electronics and suitable for mobile baseband processing, USB 2.0 data line switching, and low-power sensor hub multiplexing requiring stable component supply and consistent SC-70-5 packaging.
Supply support for DG2301DL-T1-E3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global semiconductor manufacturer specializing in discrete components including MOSFETs, diodes, optoelectronics, and analog switches, with emphasis on high-reliability, high-performance devices.
The DG2301DL-T1-E3 belongs to Vishay's high-speed analog switch product line, engineered specifically for low-latency, low-loss signal routing in portable and battery-powered digital systems.
FAQ
What is the maximum supply voltage rating for DG2301DL-T1-E3?
The DG2301DL-T1-E3 has an absolute maximum V+ rating of +6.0 V referenced to GND, but its operational specification is guaranteed only from 4.0 V to 5.5 V. Exceeding 5.5 V may cause undefined behavior or accelerated wear, and internal clamping diodes activate at V+ + 0.3 V on A, B, or OE pins. Always operate DG2301DL-T1-E3 within the 4.0–5.5 V range for compliance with datasheet timing and resistance specs.
Does DG2301DL-T1-E3 support bidirectional analog signal switching?
Yes, DG2301DL-T1-E3 supports fully bidirectional analog and digital signal routing between pins A and B. Its CMOS transmission gate structure imposes no polarity restrictions-signals can pass from A to B or B to A with identical rON, capacitance, and timing characteristics. This makes DG2301DL-T1-E3 suitable for I²C, UART, and other bidirectional bus applications without additional direction-control logic.
What is the thermal derating behavior of DG2301DL-T1-E3 above 70 °C?
DG2301DL-T1-E3 must be derated at 3.1 mW/°C above 70 °C ambient, based on its 250 mW maximum power dissipation in SC-70-5 package. At 85 °C, allowable power drops to 203.5 mW. This derating applies regardless of V+ or load conditions and assumes proper PCB copper pour for heat spreading. The DG2301DL-T1-E3 remains fully functional across its full -40 °C to +85 °C temperature range when operated within these thermal limits.
Can DG2301DL-T1-E3 be used with 3.3 V logic control signals?
Yes, DG2301DL-T1-E3 accepts TTL-compatible control inputs: VIH ≥ 2.0 V and VIL ≤ 0.8 V, making it directly drivable by standard 3.3 V CMOS outputs (which typically swing 0–3.3 V). OE logic thresholds are independent of V+, so a 3.3 V microcontroller GPIO can reliably control DG2301DL-T1-E3 even when V+ = 5.0 V. No level shifter is needed, simplifying integration into mixed-voltage systems using DG2301DL-T1-E3.
Is DG2301DL-T1-E3 RoHS compliant and lead-free?
Yes, DG2301DL-T1-E3 is RoHS-compliant and lead-free, as confirmed by the "-E3" suffix and explicit "Pb-free RoHS COMPLIANT" marking in the Vishay datasheet. It uses matte tin termination and meets exemption 7a for lead in high-melting-temperature solder alloys. The device carries full RoHS documentation and is qualified for use in consumer, industrial, and automotive applications requiring lead-free compliance, with no exemptions applied to its terminations.
DG2301DL-T1-E3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 1
- On-State Resistance (Max):
- 7Ohm
- Channel-to-Channel Matching (ΔRon):
- -
- Voltage - Supply, Single (V+):
- 4V ~ 5.5V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 3.9ns, 4ns
- -3db Bandwidth:
- -
- Charge Injection:
- -
- Channel Capacitance (CS(off), CD(off)):
- 5pF
- Current - Leakage (IS(off)) (Max):
- 10µA
- Crosstalk:
- -
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-70-5
DG2301DL-T1-E3 FAQ
1.How can I place an order for DG2301DL-T1-E3 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG2301DL-T1-E3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG2301DL-T1-E3 reliable?
The price and inventory of DG2301DL-T1-E3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG2301DL-T1-E3 is usually 5 days.
3.What payment methods are accepted for DG2301DL-T1-E3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG2301DL-T1-E3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG2301DL-T1-E3?
DG2301DL-T1-E3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG2301DL-T1-E3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG2301DL-T1-E3?
For technical support, including DG2301DL-T1-E3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG2301DL-T1-E3 requirements.
6.How does Aetrix verify that DG2301DL-T1-E3 is sourced from the original manufacturer or authorized distributors?
All DG2301DL-T1-E3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG2301DL-T1-E3 meets industry standards.
7.What is the process for return or replacement of DG2301DL-T1-E3?
All DG2301DL-T1-E3 units undergo pre-shipment inspection (PSI). If there is an issue with DG2301DL-T1-E3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG2301DL-T1-E3 part is unused and in its original packaging.
Return procedure for DG2301DL-T1-E3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG2301DL-T1-E3 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
