My Inquiry
My Account
Vishay Siliconix DG411LDQ-T1-E3
- Part No.:
- DG411LDQ-T1-E3
- Manufacturer:
- Vishay Siliconix
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
DG411LDQ-T1-E3.pdf
- Description:
- IC SW SPST-NCX4 17OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,894
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG411LDQ-T1-E3 from Vishay Siliconix is a precision monolithic quad SPST low-voltage CMOS analog switch configured as four independent normally-open switches, with 17 Ω typical RDS(on), 19 ns turn-on time, ±3 V to ±6 V dual-supply or 2.7 V to 12 V single-supply operation, and 2000 V ESD protection - used in precision audio routing and battery-powered data acquisition systems.
For engineers reviewing the DG411LDQ-T1-E3 datasheet, DG411LDQ-T1-E3 pinout, DG411LDQ-T1-E3 application, or DG411LDQ-T1-E3 equivalent, key selection considerations include its break-before-make timing (critical for glitch-free signal switching), flat on-resistance over full analog range, TTL/CMOS-compatible control logic, low 0.25 nA leakage, and TSSOP-16 RoHS-compliant packaging for high-density PCB layouts.
Technical Context
The DG411LDQ-T1-E3 implements BiCMOS fabrication to support both single- and dual-supply operation while maintaining low distortion and minimal charge injection (5 pC). Its channel architecture enforces strict break-before-make switching to prevent momentary shorting between signal paths during state transitions.
Control inputs accept standard TTL/CMOS voltage thresholds (logic "0" ≤ 0.8 V, logic "1" ≥ 2.4 V) referenced to VL, enabling direct interfacing with microcontrollers and FPGAs without level-shifting. Analog signal range spans 0–12 V (single supply) or ±5 V (dual supply), with guaranteed off-isolation of –50 dB at 50 MHz and crosstalk suppression exceeding –95 dB.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RDS(on) | 17 Ω typical - ensures minimal signal attenuation and thermal drift in precision analog paths |
| tON/tOFF | 19 ns / 12 ns - enables high-speed multiplexing in sampling systems up to ~25 MHz |
| Analog Range | 0–12 V (single) or ±5 V (dual) - supports rail-to-rail signal handling in mixed-signal front-ends |
| Leakage Current | 0.25 nA max - preserves accuracy in high-impedance sensor interfaces and integrator circuits |
| ESD Rating | 2000 V HBM - provides robust handling during board assembly and field deployment |
| Supply Range | 2.7–12 V single or ±3–±6 V dual - allows flexible power architecture in portable and industrial designs |
| Charge Injection | 5 pC - limits voltage glitch on sampled nodes, critical for ADC input conditioning |
Pinout & Package
Package: 16-pin TSSOP (JEDEC MS-012 compatible), 4.4 mm × 5.0 mm footprint, 0.65 mm pitch, RoHS-compliant lead finish.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 5, 9, 13 (IN1–IN4) | Digital control input | Active-high logic; drives corresponding switch ON when ≥2.4 V (TTL/CMOS compatible) |
| 2, 6, 10, 14 (S1–S4) | Source terminal | Input analog node for each SPST switch; connects to load when switch is closed |
| 3, 7, 11, 15 (D1–D4) | Drain terminal | Output analog node; routed to Sx when switch is ON |
| 4 (V+) | Positive supply | Bias for internal circuitry and analog channel conduction; sets upper analog rail |
| 8 (V−) | Negative supply | Required for dual-supply operation; sets lower analog rail (0 V for single supply) |
| 12 (GND) | Ground reference | Common return for digital logic and substrate bias; must be low-impedance |
| 16 (VL) | Logic supply | Independent 2.7–5.5 V rail for control inputs; decouples logic noise from analog path |
Key Features
| Feature | Design Value |
|---|---|
| Break-before-make timing | Guaranteed 6 ns minimum delay prevents signal shorting during transition - essential for fault-tolerant multiplexers |
| Flat RDS(on) profile | ≤5 Ω variation across full analog range - maintains consistent gain and linearity in audio/video paths |
| Low charge injection | 5 pC typical - avoids step errors in sample-and-hold and switched-capacitor circuits |
| High off-isolation | –50 dB at 50 MHz - suppresses crosstalk in multi-channel RF and communication front-ends |
| TTL/CMOS compatibility | Logic thresholds fixed at ≤0.8 V (low) and ≥2.4 V (high) - eliminates need for external level shifters |
Applications
| Audio Signal Routing | Precision Data Acquisition |
|---|---|
Use Scenario: Selecting between multiple microphone or line-level inputs in a studio-grade mixer or USB audio interface. IC Role / Device Role / Timing Role: Quad SPST analog switch providing isolated, low-distortion signal path selection with simultaneous channel independence. Use Value: 17 Ω RDS(on) and <5 pC charge injection preserve signal fidelity and prevent audible clicks during switching. | Use Scenario: Multiplexing sensor outputs (thermocouples, strain gauges) into a 16-bit SAR ADC in portable test equipment. IC Role / Device Role / Timing Role: Precision analog switch enabling sequential sampling with minimal offset error and channel-to-channel crosstalk. Use Value: 0.25 nA leakage and –50 dB off-isolation maintain measurement integrity across 100 kΩ+ source impedances. |
| Battery-Powered Instrumentation | Communication System Front-End |
Use Scenario: Power-gating unused analog signal chains in handheld multimeters or environmental monitors to extend battery life. IC Role / Device Role / Timing Role: Low-quiescent-current analog switch (I+ < 1 µA) enabling selective signal path activation under firmware control. Use Value: 2.7 V minimum supply and 7.5 µA max I+ allow direct operation from single Li-ion cells without regulators. | Use Scenario: Routing differential analog signals between DSLAM line cards and diagnostic test ports in broadband access infrastructure. IC Role / Device Role / Timing Role: High-speed, low-crosstalk switch supporting SDSL/ADSL signal integrity up to 280 MHz (–3 dB bandwidth). Use Value: 280 MHz –3 dB bandwidth and –95 dB crosstalk ensure compliance with ITU-T G.992.x spectral masks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4617ESE+ | Higher RDS(on) (45 Ω typ), slower tON (40 ns), no dual-supply support | Limited to single-supply 3–5 V systems; unsuitable for ±5 V audio or wide-range data acquisition | Prefer DG411LDQ-T1-E3 when dual-supply operation or sub-20 ns switching is required |
| ADG1411BRUZ | Lower RDS(on) (1.8 Ω typ), higher supply current (200 µA), requires external logic level translation for 3.3 V control | Better for ultra-low-loss instrumentation but increases BOM count and layout complexity | Select DG411LDQ-T1-E3 for cost-sensitive, low-power, and logic-compatible designs without added components |
Compared with MAX4617ESE+ and ADG1411BRUZ, the DG411LDQ-T1-E3 delivers optimal balance of speed, on-resistance, supply flexibility, and integration - making it ideal for space-constrained, battery-operated, and mixed-supply analog routing where simplicity and reliability are prioritized over ultra-low RDS(on).
Availability
DG411LDQ-T1-E3 is available at Aetrix Electronics and suitable for precision data acquisition, battery-powered instrumentation, and audio signal routing requiring stable component supply across industrial temperature ranges (–40 °C to +85 °C).
Supply support for DG411LDQ-T1-E3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global semiconductor manufacturer specializing in discrete MOSFETs, diodes, optoelectronics, and precision analog ICs with emphasis on reliability and ruggedness.
The DG411L family was designed specifically for high-fidelity analog signal routing in test equipment and communications infrastructure, emphasizing low distortion, fast settling, and robust ESD tolerance in compact packages.
FAQ
What supply configurations does the DG411LDQ-T1-E3 support?
The DG411LDQ-T1-E3 operates from a single supply of 2.7 V to 12 V (V− = GND) or dual supplies of ±3 V to ±6 V (V+ and V− referenced to GND). The logic supply VL accepts 2.7 V to 5.5 V independently, allowing clean separation between analog and digital domains. This flexibility makes DG411LDQ-T1-E3 suitable for both portable and industrial systems without redesigning power architecture.
Is the DG411LDQ-T1-E3 pin-compatible with the legacy DG411 series?
Yes, the DG411LDQ-T1-E3 is pin-for-pin compatible with the industry-standard DG411 and offers improved performance including lower RDS(on), faster switching, and enhanced ESD protection. It retains identical pinout, package dimensions, and functional block diagram - enabling drop-in replacement in existing SOIC or TSSOP-16 layouts without PCB modification.
What is the maximum analog signal frequency supported by the DG411LDQ-T1-E3?
The DG411LDQ-T1-E3 exhibits –3 dB bandwidth of 280 MHz under single-supply 12 V conditions, verified via insertion loss testing. At 50 MHz, it delivers –50 dB off-isolation and –95 dB crosstalk, confirming suitability for high-frequency analog routing in SDSL, video switching, and RF test equipment where signal integrity is critical.
Does the DG411LDQ-T1-E3 require external pull-up or pull-down resistors on control inputs?
No, the DG411LDQ-T1-E3 features TTL/CMOS-compatible inputs with defined thresholds (logic "0" ≤ 0.8 V, logic "1" ≥ 2.4 V) and input leakage <1 µA. Control lines can be driven directly from microcontroller GPIOs or FPGA outputs without external biasing - simplifying design and reducing component count in DG411LDQ-T1-E3-based systems.
How does the break-before-make timing function in the DG411LDQ-T1-E3?
The DG411LDQ-T1-E3 guarantees a minimum 6 ns break-before-make delay between switch transitions, preventing momentary short-circuits during state changes. This timing is internally controlled and independent of external RC networks, ensuring reliable glitch-free operation in multiplexer and relay-replacement applications where signal path integrity is mandatory.
DG411LDQ-T1-E3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 17Ohm
- Channel-to-Channel Matching (ΔRon):
- -
- Voltage - Supply, Single (V+):
- 2.7V ~ 12V
- Voltage - Supply, Dual (V±):
- ±3V ~ 6V
- Switch Time (Ton, Toff) (Max):
- 19ns, 12ns
- -3db Bandwidth:
- 280MHz
- Charge Injection:
- 5pC
- Channel Capacitance (CS(off), CD(off)):
- 5pF, 6pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -95dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
DG411LDQ-T1-E3 FAQ
1.How can I place an order for DG411LDQ-T1-E3 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG411LDQ-T1-E3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG411LDQ-T1-E3 reliable?
The price and inventory of DG411LDQ-T1-E3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG411LDQ-T1-E3 is usually 5 days.
3.What payment methods are accepted for DG411LDQ-T1-E3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG411LDQ-T1-E3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG411LDQ-T1-E3?
DG411LDQ-T1-E3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG411LDQ-T1-E3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG411LDQ-T1-E3?
For technical support, including DG411LDQ-T1-E3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG411LDQ-T1-E3 requirements.
6.How does Aetrix verify that DG411LDQ-T1-E3 is sourced from the original manufacturer or authorized distributors?
All DG411LDQ-T1-E3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG411LDQ-T1-E3 meets industry standards.
7.What is the process for return or replacement of DG411LDQ-T1-E3?
All DG411LDQ-T1-E3 units undergo pre-shipment inspection (PSI). If there is an issue with DG411LDQ-T1-E3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG411LDQ-T1-E3 part is unused and in its original packaging.
Return procedure for DG411LDQ-T1-E3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG411LDQ-T1-E3 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
