My Inquiry
My Account
Vishay Siliconix DG419DY-E3
- Part No.:
- DG419DY-E3
- Manufacturer:
- Vishay Siliconix
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DG419DY-E3.pdf
- Description:
- IC SWITCH SPDT X 1 35OHM 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:809
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG419DY-E3 from Vishay Siliconix is a precision SPDT CMOS analog switch optimized for bidirectional signal routing in ±15 V dual-supply or 12 V single-supply systems. It delivers 20 Ω on-resistance, 100 ns turn-on time, break-before-make switching, and <0.25 nA off-leakage - enabling high-accuracy signal path control in battery-powered instrumentation and military radios.
For engineers reviewing the DG419DY-E3 datasheet, DG419DY-E3 pinout, DG419DY-E3 application, or DG419DY-E3 equivalent, key selection criteria include guaranteed break-before-make timing (13 ns typ.), ultra-low 35 nW power dissipation, ±15 V analog signal range, SOIC-8 package compatibility, and TTL/CMOS logic interface support.
Technical Context
The DG419DY-E3 implements a monolithic SPDT switch architecture using Vishay's high-voltage silicon gate (HVSG) process, enabling 44 V supply rating and latchup immunity via epitaxial isolation. Its control logic accepts standard TTL/CMOS levels (0.8 V low / 2.4 V high) and drives two independent switch paths with complementary activation.
Break-before-make operation is electrically guaranteed across temperature (–40 °C to +85 °C), with 13 ns typical delay between channel deactivation and reactivation. Signal conduction is symmetrical (S1↔D and S2↔D), supporting rail-to-rail analog signals up to ±15 V or 0–12 V without distortion.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Analog signal range | ±15 V (supports full-rail bipolar signal switching without clipping) |
| On-resistance (RDS(on)) | 20 Ω (ensures minimal gain error and voltage drop in precision signal paths) |
| Turn-on time (ton) | 100 ns (enables fast multiplexing in data acquisition and test equipment) |
| Off-leakage current (IS(off)) | ±0.25 nA max (preserves accuracy in high-impedance sample-and-hold circuits) |
| Supply voltage range | ±5 V to ±20 V dual or 5–40 V single (flexible integration into legacy and low-power systems) |
| Power dissipation | 35 nW (enables operation in energy-constrained portable and remote sensors) |
| Charge injection | 60 pC (minimizes settling error in precision ADC front-ends) |
Pinout & Package
DG419DY-E3 is housed in an 8-pin narrow SOIC package (JEDEC MS-012), 3.9 mm × 4.9 mm footprint, 1.75 mm height, with 1.27 mm lead pitch. Pin 1 marked by bevelled corner.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Digital control input | Active-high logic enables S1–D path; logic low enables S2–D path |
| 2 (S2) | Source 2 terminal | Second analog input/output node for SPDT configuration |
| 3 (S1) | Source 1 terminal | Primary analog input/output node; connects to D when IN = 0 |
| 4 (V−) | Negative supply rail | Bias reference for negative analog swing; supports –15 V operation |
| 5 (GND) | Ground reference | Logic ground and substrate reference; separate from analog return in mixed-signal layouts |
| 6 (V+) | Positive supply rail | Bias reference for positive analog swing; supports +15 V operation |
| 7 (VL) | Logic supply voltage | Independent 5 V rail for TTL/CMOS-compatible control interface |
| 8 (D) | Drain/common terminal | Shared analog I/O port; routes signal from selected source (S1 or S2) |
Key Features
| Feature | Design Value |
|---|---|
| Break-before-make switching | Guaranteed 13 ns minimum delay prevents momentary shorting between S1 and S2 during transition |
| Ultra-low power consumption | 35 nW typical quiescent power enables multi-year battery life in portable instrumentation |
| Rail-to-rail analog capability | ±15 V signal range allows direct interfacing with op-amps and ADCs operating at full supply rails |
| Low charge injection (60 pC) | Minimizes voltage glitch on sampling capacitors, critical for 16-bit+ data acquisition accuracy |
| High off-isolation (–60 dB) | Ensures >1 MΩ effective channel isolation at 1 MHz, suppressing crosstalk in multi-channel systems |
Applications
| Precision Test Equipment | Precision Instrumentation |
|---|---|
Use Scenario: Automated test system routing analog sensor outputs to multiple measurement channels. IC Role / Device Role / Timing Role: SPDT signal selector managing 1-of-2 sensor inputs to a shared high-resolution ADC front-end. Use Value: 20 Ω RDS(on) and <0.25 nA leakage preserve measurement integrity across temperature and voltage ranges. | Use Scenario: Portable handheld multimeter with dual-input voltage/current measurement modes. IC Role / Device Role / Timing Role: Analog switch isolating input protection circuitry from meter core during range switching. Use Value: Break-before-make action prevents transient shorts; ±15 V range supports 1000 V CAT II input scaling. |
| Battery-Powered Systems | Military Radios |
Use Scenario: Low-power environmental sensor node aggregating thermocouple, RTD, and humidity signals. IC Role / Device Role / Timing Role: Power-gated analog multiplexer enabling selective sensor activation to extend coin-cell lifetime. Use Value: 35 nW standby power and 100 ns switching allow microsecond-level wake-up and sampling cycles. | Use Scenario: Secure HF/VHF transceiver requiring RF signal path switching under EMI-heavy conditions. IC Role / Device Role / Timing Role: Low-distortion analog switch routing IF signals between receive and transmit chains. Use Value: 60 pC charge injection and –60 dB off-isolation maintain SNR >85 dB in 10 kHz–30 MHz bands. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar SPDT analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4619ESE+ | Higher 35 Ω RDS(on), 125 ns ton, no guaranteed break-before-make | Lower cost; suitable where timing overlap tolerance exists | Select for cost-sensitive industrial controls where precise channel separation is non-critical |
| ADG1419BRUZ | Lower 4.7 Ω RDS(on), 150 ns ton, ±16.5 V rating, higher 1.2 μA IQ | Higher performance but consumes >30× more quiescent power | Select for high-precision lab equipment where on-resistance dominates error budget |
Compared with MAX4619ESE+ and ADG1419BRUZ, DG419DY-E3 uniquely balances ultra-low power (35 nW), guaranteed break-before-make, and 20 Ω on-resistance - making it optimal for portable, battery-constrained, and safety-critical signal routing where both timing integrity and efficiency matter.
Availability
DG419DY-E3 is available at Aetrix Electronics and suitable for precision test equipment, battery-powered instrumentation, and military radio designs requiring stable component supply, long-lifecycle assurance, and RoHS-compliant sourcing.
Supply support for DG419DY-E3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global leader in discrete semiconductors and passive components, specializing in high-reliability analog solutions for demanding industrial, military, and aerospace environments.
The DG419DY-E3 belongs to Vishay's precision CMOS analog switch family, engineered specifically for low-leakage, low-distortion signal routing in portable, high-accuracy measurement and communication systems.
FAQ
What is the guaranteed break-before-make time for DG419DY-E3?
The DG419DY-E3 guarantees a minimum break-before-make time delay of 5 ns over its full operating temperature range (–40 °C to +85 °C), with 13 ns typical at 25 °C. This specification ensures no simultaneous conduction between S1 and S2 paths during switching transitions, preventing signal shorting in critical analog routing applications. The value is measured under standard test conditions (RL = 300 Ω, CL = 35 pF, VS1 = VS2 = ±10 V) per Vishay document 70051.
Does DG419DY-E3 support single-supply operation?
Yes, DG419DY-E3 supports single-supply operation from 5 V to 40 V. In unipolar mode (e.g., V+ = 12 V, V− = 0 V), it maintains 40 Ω typical on-resistance and 110 ns turn-on time while preserving rail-to-rail analog signal handling (0–12 V). The VL pin must still be supplied with 5 V for TTL/CMOS logic compatibility, and all absolute maximum ratings (e.g., 44 V supply limit) remain applicable regardless of supply configuration.
What is the maximum analog signal voltage range for DG419DY-E3?
The DG419DY-E3 supports a maximum analog signal range of ±15 V when operated with dual supplies (V+ = +15 V, V− = –15 V), or 0–12 V with single supply (V+ = 12 V, V− = 0 V). Signals exceeding these limits are clamped by internal diodes; forward diode current must be limited to rated maximums. The ±15 V range is fully specified and tested per Vishay datasheet 70051, ensuring linearity and low distortion across the entire span.
How does DG419DY-E3 achieve latchup immunity?
DG419DY-E3 achieves latchup immunity through an epitaxial layer integrated into Vishay Siliconix's high-voltage silicon gate (HVSG) process. This structural feature prevents parasitic SCR formation between adjacent P-N junctions under transient stress or overvoltage conditions. The design is verified per JEDEC JESD78 Class II requirements, and no latchup has been observed in qualification testing across –40 °C to +125 °C ambient temperatures.
Is DG419DY-E3 RoHS-compliant?
Yes, DG419DY-E3 is RoHS-compliant. The "-E3" suffix denotes lead-free termination and compliance with Directive 2011/65/EU. Per Vishay document 70051, this part uses matte tin plating over copper leadframe and meets all substance restrictions, including Pb < 1000 ppm. Full compliance documentation, including test reports and material declarations, is available upon request from Aetrix Electronics or directly from Vishay.
DG419DY-E3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Active
- Switch Circuit:
- SPDT
- Multiplexer/Demultiplexer Circuit:
- 2:1
- Number of Circuits:
- 1
- On-State Resistance (Max):
- 35Ohm
- Channel-to-Channel Matching (ΔRon):
- -
- Voltage - Supply, Single (V+):
- 12V
- Voltage - Supply, Dual (V±):
- ±15V
- Switch Time (Ton, Toff) (Max):
- 175ns, 145ns
- -3db Bandwidth:
- -
- Charge Injection:
- 60pC
- Channel Capacitance (CS(off), CD(off)):
- 8pF, 8pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
DG419DY-E3 FAQ
1.How can I place an order for DG419DY-E3 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG419DY-E3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG419DY-E3 reliable?
The price and inventory of DG419DY-E3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG419DY-E3 is usually 5 days.
3.What payment methods are accepted for DG419DY-E3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG419DY-E3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG419DY-E3?
DG419DY-E3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG419DY-E3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG419DY-E3?
For technical support, including DG419DY-E3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG419DY-E3 requirements.
6.How does Aetrix verify that DG419DY-E3 is sourced from the original manufacturer or authorized distributors?
All DG419DY-E3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG419DY-E3 meets industry standards.
7.What is the process for return or replacement of DG419DY-E3?
All DG419DY-E3 units undergo pre-shipment inspection (PSI). If there is an issue with DG419DY-E3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG419DY-E3 part is unused and in its original packaging.
Return procedure for DG419DY-E3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG419DY-E3 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
