My Inquiry
My Account
Vishay Siliconix DG611DY-T1
- Part No.:
- DG611DY-T1
- Manufacturer:
- Vishay Siliconix
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DG611DY-T1.pdf
- Description:
- IC SWITCH SPST-NCX4 45OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,485
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG611DY-T1 from Vishay Siliconix is a high-speed, low-glitch quad SPST analog switch IC designed for precision signal routing in fast-switching systems. It features 12 ns turn-on time, 18 Ω on-resistance, ±2 pC charge injection, 500 MHz bandwidth, and operates from ±3 V to ±10.5 V dual supplies or 5–21 V single supply. It is used in pixel-rate video switching and DAC deglitching where minimal transient error and wide analog bandwidth are critical.
For engineers reviewing the DG611DY-T1 datasheet, DG611DY-T1 pinout, DG611DY-T1 application, or DG611DY-T1 equivalent, key selection criteria include guaranteed 12 ns tON, sub-2 pC charge injection, 4-channel independent control with logic-compatible inputs (VIL ≤ 1 V, VIH ≥ 4 V), and SOIC-16 package compatibility with standard PCB footprints.
Technical Context
The DG611DY-T1 implements four independent n-channel DMOS analog switches fabricated using Vishay's proprietary D/CMOS process, combining low-power CMOS control logic with high-speed lateral DMOS FETs. Each switch conducts bidirectionally with matched on-resistance and blocks up to 16 Vp-p when off.
It uses an epitaxial layer to prevent latch-up and integrates level translators to ensure proper switching across logic supply (VL) from 4 V to V+. Input thresholds are fixed at ≤1 V for logic "0" and ≥4 V for logic "1", enabling direct interface with 5 V CMOS systems without external biasing.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| tON | 12 ns - Enables sub-100 MHz sample rates in fast data acquisition without aperture uncertainty degradation. |
| RDS(on) | 18 Ω typical - Minimizes insertion loss and signal distortion in 50 Ω or 75 Ω video/audio paths. |
| Charge injection | ±2 pC - Reduces step-induced offset errors in sample-and-hold and switched-capacitor circuits. |
| Bandwidth | 500 MHz - Supports full-spectrum integrity for HD video, RF sampling, and high-frequency test equipment signals. |
| Off isolation | 74 dB at 5 MHz - Ensures channel crosstalk remains below -70 dB in multi-source video mixing applications. |
| Analog range | V– to (V+ – 5) V - Allows rail-to-rail analog signal handling with 5 V headroom margin for safe overvoltage clamping. |
| Supply range | V+: 5–21 V; V–: –10 to 0 V - Supports flexible bipolar operation (e.g., ±5 V, ±12 V) or single-ended 12 V/15 V systems. |
Pinout & Package
Package: 16-pin narrow-body SOIC (JEDEC MS-012), 3.9 mm × 9.9 mm body, 1.27 mm pitch, RoHS-compliant (Pb-free terminations).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4 (IN1–IN4) | Digital control inputs | Active-high logic inputs; drive internal level translators to enable corresponding SPST switch (logic "1" = ON). |
| 5, 6, 13, 14 (S1–S4) | Switch source terminals | Analog input nodes; bidirectional conduction path when switch is ON; connect to signal sources or common points. |
| 7, 8, 11, 12 (D1–D4) | Switch drain terminals | Analog output nodes; mirror S-terminal behavior; support symmetric signal routing in video or instrumentation paths. |
| 9 (V–) | Negative supply rail | Bias reference for NMOS switch channel; must be ≤ 0 V and ≥ (V+ – 21 V) per absolute max ratings. |
| 10 (V+) | Positive supply rail | Primary power for DMOS switches; sets upper analog voltage limit and influences RDS(on) and bandwidth. |
| 15 (GND) | Analog/digital ground reference | Common return for V–, logic drivers, and substrate; requires low-impedance PCB connection to minimize noise coupling. |
| 16 (VL) | Logic supply voltage | Independent 4–V+ supply for CMOS control logic; decouples digital noise from analog signal paths. |
Key Features
| Feature | Design Value |
|---|---|
| Four independent SPST switches | Enables discrete routing of four separate analog signals (e.g., RGB+sync, I/Q pairs, multi-channel ADC inputs) without shared control constraints. |
| Low charge injection (±2 pC) | Reduces hold-step error to <1 mV in 1 nF sample-and-hold capacitors, eliminating need for post-switching correction circuitry. |
| 5 V CMOS logic compatibility | Eliminates level-shifting components when interfacing with microcontrollers, FPGAs, or ASICs operating at 5 V TTL/CMOS logic levels. |
| Wide analog bandwidth (500 MHz) | Maintains <0.1 dB flatness up to 100 MHz and supports composite video (NTSC/PAL), HDMI auxiliary channels, and IF sampling. |
| Single-supply or split-supply operation | Supports design reuse across 12 V industrial systems and ±5 V test equipment without board redesign or BOM changes. |
Applications
| Fast Sample-and-Hold Circuits | Pixel-Rate Video Switching |
|---|---|
|
Use Scenario: High-speed data acquisition system capturing transient waveforms at >10 MSPS with sub-1 LSB accuracy. IC Role / Device Role / Timing Role: Precision analog gate controlling hold capacitor charging; activated synchronously with ADC sampling clock edge. Use Value: 12 ns tON and ±2 pC charge injection ensure aperture jitter <50 ps and hold-step error <0.5 mV, preserving ENOB in 12-bit+ systems. |
Use Scenario: Broadcast-grade video processor overlaying graphics onto live video streams at 60 Hz frame rate with no visible halo artifacts. IC Role / Device Role / Timing Role: Glitch-free analog multiplexer selecting between background and title video sources synchronized to horizontal blanking interval. Use Value: 500 MHz bandwidth preserves luminance/chrominance phase integrity; 74 dB off-isolation prevents ghosting between active and inactive video paths. |
| DAC Deglitching | GaAs FET Driver Interface |
|
Use Scenario: Precision waveform generator using R-2R ladder DAC requiring clean analog output without major transition glitches. IC Role / Device Role / Timing Role: Post-DAC switch isolating DAC output during code transitions to suppress slewing-induced transients. Use Value: Low RDS(on) (18 Ω) and minimal charge injection eliminate settling overshoot, reducing deglitch filter complexity and board space. |
Use Scenario: Phased-array radar front-end requiring rapid GaAs FET bias switching between +5 V (ON) and –8 V (OFF) states. IC Role / Device Role / Timing Role: Dual-channel level-translating driver delivering precise gate voltages to GaAs FETs with nanosecond timing alignment. Use Value: Bidirectional conduction and 16 Vp-p blocking capability allow safe switching between positive/negative bias rails without external protection diodes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4617ESE+ | Higher RDS(on) (35 Ω typ), slower tON (25 ns), lower bandwidth (300 MHz), but offers fault protection and higher ESD rating (±4 kV HBM). | Better suited for industrial sensor interfaces with surge exposure; less ideal for >50 MHz video or sub-20 ns timing-critical sampling. | Select MAX4617ESE+ when robustness in harsh environments outweighs speed requirements. |
| ADG1414BRUZ | Lower RDS(on) (1.3 Ω typ), faster tON (10 ns), but requires higher logic supply (VL = 2.7–5.5 V) and lacks independent VL pin for noise isolation. | Preferred for ultra-low-loss instrumentation amplifier multiplexing; not optimal for mixed-signal systems needing isolated logic/analog grounds. | Choose ADG1414BRUZ when minimizing on-resistance dominates over layout-level noise separation needs. |
Compared with DG611DY-T1, MAX4617ESE+ trades speed for ruggedness and ADG1414BRUZ sacrifices logic supply flexibility for lower resistance-making DG611DY-T1 the balanced choice for high-fidelity video, fast sampling, and mixed-voltage system integration where independent VL and 500 MHz bandwidth are essential.
Availability
DG611DY-T1 is available at Aetrix Electronics and suitable for pixel-rate video switching, fast sample-and-holds, and DAC deglitching requiring stable component supply across industrial, broadcast, and test equipment production cycles.
Supply support for DG611DY-T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global semiconductor manufacturer specializing in discrete MOSFETs, diodes, optoelectronics, and precision analog switches, with emphasis on high-reliability, high-performance components for demanding signal-path applications.
The DG611DY-T1 belongs to Vishay's D/CMOS analog switch product line, engineered specifically for high-speed, low-distortion signal routing in video, instrumentation, and communications systems where glitch energy, charge injection, and bandwidth are critical.
FAQ
What is the maximum analog signal voltage range supported by the DG611DY-T1?
The DG611DY-T1 supports an analog signal range from V– to (V+ – 5) V under recommended operating conditions. For example, with V+ = 15 V and V– = –3 V, the usable analog range is –3 V to +10 V. This 13 V span ensures compatibility with standard ±5 V and ±12 V systems while maintaining 5 V headroom for internal clamp diode safety margins. The DG611DY-T1 datasheet specifies this range explicitly in the Recommended Operating Range table.
Does the DG611DY-T1 require separate logic and analog ground connections?
No-the DG611DY-T1 uses a single GND pin (Pin 15) for both logic and analog return paths. However, best practice is to tie this pin to a low-impedance analog ground plane and isolate digital noise sources via PCB layout. The device's independent VL pin (Pin 16) enables logic supply decoupling, reducing coupling into analog paths. This architecture avoids mandatory split-ground schemes while still supporting noise-sensitive designs when implemented correctly in the DG611DY-T1 layout.
Can the DG611DY-T1 operate with a single 12 V supply?
Yes-the DG611DY-T1 supports single-supply operation with V+ = 12 V and V– = 0 V (GND). In this configuration, the analog signal range becomes 0 V to +7 V (since VANALOG = V– to (V+ – 5)). Logic inputs remain compatible with 5 V CMOS levels, and VL can be tied to 5 V. This mode is validated in the datasheet's Unipolar Supplies section and is commonly used in portable video gear and industrial controllers where negative rails are unavailable.
How does the DG611DY-T1 compare to the DG612DY-T1 in functionality?
The DG611DY-T1 and DG612DY-T1 are functionally identical quad SPST switches except for inverted logic polarity: DG611DY-T1 turns ON with logic HIGH (≥4 V) and OFF with logic LOW (≤1 V), whereas DG612DY-T1 operates inversely. Both share identical electrical specs-including 12 ns tON, 18 Ω RDS(on), and 500 MHz bandwidth-and use the same SOIC-16 package. The choice depends solely on system-level control signal polarity, not performance or pinout.
Is the DG611DY-T1 RoHS compliant?
Yes-the DG611DY-T1 is RoHS compliant with lead-free terminations, as confirmed in the Vishay ordering information table and package drawings (Document #71261). The "-T1" suffix denotes tape-and-reel packaging for automated assembly, and all variants listed under DG611DY-T1 and DG611DY-T1-E3 meet EU RoHS Directive 2011/65/EU requirements. Compliance documentation is available through Vishay's quality portal using the DG611DY-T1 part number.
DG611DY-T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 45Ohm
- Channel-to-Channel Matching (ΔRon):
- 2Ohm
- Voltage - Supply, Single (V+):
- 10V ~ 18V
- Voltage - Supply, Dual (V±):
- ±10V ~ 15V
- Switch Time (Ton, Toff) (Max):
- 35ns, 25ns
- -3db Bandwidth:
- 500MHz
- Charge Injection:
- 4pC
- Channel Capacitance (CS(off), CD(off)):
- 3pF, 2pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -87dB @ 5MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
DG611DY-T1 FAQ
1.How can I place an order for DG611DY-T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG611DY-T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG611DY-T1 reliable?
The price and inventory of DG611DY-T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG611DY-T1 is usually 5 days.
3.What payment methods are accepted for DG611DY-T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG611DY-T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG611DY-T1?
DG611DY-T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG611DY-T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG611DY-T1?
For technical support, including DG611DY-T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG611DY-T1 requirements.
6.How does Aetrix verify that DG611DY-T1 is sourced from the original manufacturer or authorized distributors?
All DG611DY-T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG611DY-T1 meets industry standards.
7.What is the process for return or replacement of DG611DY-T1?
All DG611DY-T1 units undergo pre-shipment inspection (PSI). If there is an issue with DG611DY-T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG611DY-T1 part is unused and in its original packaging.
Return procedure for DG611DY-T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG611DY-T1 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
