My Inquiry
My Account
Vishay Siliconix DG611EEQ-T1-GE3
- Part No.:
- DG611EEQ-T1-GE3
- Manufacturer:
- Vishay Siliconix
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
DG611EEQ-T1-GE3.pdf
- Description:
- IC SW SPST-NCX4 115OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,368
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG611EEQ-T1-GE3 from Vishay Siliconix is a quad SPST analog switch with normally closed (NC) configuration, designed for precision signal routing in high-speed, low-distortion applications. It delivers 72 Ω typical on-resistance at ±5 V dual supply, 1.4 pC charge injection, 3 pF off-capacitance, and 1 GHz 3 dB bandwidth - enabling use in medical instrumentation front-ends and automated test equipment multiplexing stages.
For engineers reviewing the DG611EEQ-T1-GE3 datasheet, DG611EEQ-T1-GE3 pinout, DG611EEQ-T1-GE3 application, or DG611EEQ-T1-GE3 equivalent, key selection criteria include rail-to-rail analog signal handling, -40 °C to +125 °C operation, TSSOP-16 package compatibility, and guaranteed 2 V logic-high threshold at +5 V supply.
Technical Context
The DG611EEQ-T1-GE3 implements four independent CMOS transmission gate switches with complementary control logic: logic low enables conduction (NC), logic high disconnects. It supports single-supply (3–16 V) and dual-supply (±3 V to ±8 V) operation, with full specification at +3 V, +5 V, and ±5 V.
All channels exhibit matched on-resistance (ΔRDS(on) ≤ 2.5 Ω), low flatness variation (Rflat(on) ≤ 20 Ω), and symmetrical bidirectional signal flow. Dynamic performance includes 23 ns turn-on / 14 ns turn-off times and -59 dB off-isolation at 10 MHz - critical for multi-channel data acquisition integrity.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Type | Quad SPST, normally closed (NC) - all four switches conduct when control input is logic low |
| On-Resistance (RDS(on)) | 72 Ω typ. at ±5 V - ensures minimal signal attenuation and gain error in precision analog paths |
| Charge Injection | 1.4 pC typ. - limits voltage glitch in sample-and-hold and switched-capacitor circuits |
| Bandwidth | 1 GHz 3 dB - supports high-fidelity routing of RF and fast digital signals up to ~300 Mbps |
| Leakage Current | <0.1 nA max. at 85 °C - preserves accuracy in high-impedance sensor interfaces and integrators |
| Supply Range | 3 V to 16 V single or ±3 V to ±8 V dual - enables direct interfacing with legacy ±5 V systems and modern 3.3 V logic |
| Logic Threshold | 2 V min. high-level input at +5 V - ensures robust TTL/CMOS compatibility without level-shifting |
Pinout & Package
Package: 16-pin TSSOP (JEDEC MO-153, 4.4 mm × 5.0 mm × 1.2 mm), lead-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 | Digital control inputs | Active-low enables NC switch conduction; compatible with 2 V logic-high threshold at +5 V supply |
| S1–S4 | Source terminals | Analog inputs for each SPST switch; rail-to-rail capable from V− to V+ |
| D1–D4 | Drain terminals | Analog outputs; bidirectional conduction identical to source side |
| V+ | Positive supply | Accepts 3–16 V single or +3 to +8 V dual supply; powers internal switch core and level shifters |
| V− | Negative supply | Accepts 0 V (ground) or −3 to −8 V; enables true bipolar signal handling |
| GND | Ground reference | Logic ground return; separate from analog signal path to minimize noise coupling |
| NC | No-connect | Pin 3 is internally unused; must be left unconnected per datasheet |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail analog range | Signals swing from V− to V+ with no clipping - preserves full dynamic range in ±5 V systems |
| Low 3 pF off-capacitance | Minimizes crosstalk and loading on adjacent high-impedance nodes in dense PCB layouts |
| 1 GHz bandwidth | Enables clean switching of video, USB 2.0, and high-speed serial signals without edge degradation |
| -74 dB crosstalk at 10 MHz | Prevents interference between active channels in multi-signal acquisition systems |
| Specified over -40 °C to +125 °C | Validated performance across automotive under-hood and industrial control environments |
Applications
| Medical Instrumentation | Automated Test Equipment |
|---|---|
Use Scenario: Multiplexing ECG electrode inputs into a single ADC channel while maintaining signal fidelity and low offset drift. IC Role / Device Role / Timing Role: Quad SPST NC switch routes biopotential signals with <1.4 pC charge injection to prevent hold-step errors. Use Value: Enables 16-bit+ resolution in portable ECG devices by eliminating switch-induced baseline wander. |
Use Scenario: Channel selection in high-speed parametric test systems requiring sub-50 ns settling and minimal signal distortion. IC Role / Device Role / Timing Role: Precision analog switch provides repeatable 72 Ω on-resistance and 23 ns tON for stimulus/response timing alignment. Use Value: Reduces test cycle time by supporting >10 kSPS channel scanning without calibration overhead. |
| Precision Data Acquisition | High-Speed Communications |
Use Scenario: Front-end signal conditioning in 24-bit delta-sigma ADC systems where leakage and charge injection directly impact INL/DNL. IC Role / Device Role / Timing Role: Low-leakage (<0.1 nA), low-charge-injection switch isolates sensor inputs during sampling intervals. Use Value: Maintains effective resolution >22 bits over temperature by limiting error sources in the analog signal chain. |
Use Scenario: Selecting between multiple clock sources or data lanes in FPGA-based communication platforms. IC Role / Device Role / Timing Role: 1 GHz bandwidth SPST switch routes LVDS or PECL signals with <0.13% THD at 10 MHz. Use Value: Eliminates need for discrete RF switches or transformers in compact, high-density SerDes board designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1411BRUZ | Quad SPST NO, 1.8 Ω RDS(on), ±15 V supply, SOIC-16 - lower on-resistance but higher charge injection (12 pC) | Better for low-RON power switching; unsuitable for precision sample-and-hold due to higher glitch energy | Select DG611EEQ-T1-GE3 when charge injection & bandwidth dominate; ADG1411BRUZ when ultra-low RON is critical |
| MAX4617ESE+ | Quad SPST NC, 60 Ω RDS(on), +5 V only, SOIC-16 - narrower supply range, no dual-supply support | Limited to single-rail 5 V systems; lacks rail-to-rail analog range and -40 °C to +125 °C rating | DG611EEQ-T1-GE3 preferred for industrial/multi-supply designs; MAX4617ESE+ acceptable only in cost-sensitive 5 V-only apps |
Compared with ADG1411BRUZ and MAX4617ESE+, the DG611EEQ-T1-GE3 uniquely balances ultra-low charge injection (1.4 pC), 1 GHz bandwidth, and full dual-supply operation - making it the only option among the three qualified for precision bipolar signal routing across extended temperature ranges.
Availability
DG611EEQ-T1-GE3 is available at Aetrix Electronics and suitable for medical instrumentation, automated test equipment, and high-end data acquisition systems requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for DG611EEQ-T1-GE3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global leader in discrete semiconductors and passive components, specializing in high-reliability analog solutions for industrial, automotive, and computing markets.
The DG611EEQ-T1-GE3 belongs to Vishay's precision analog switch family, engineered for low-glitch, high-bandwidth signal routing in measurement-critical systems where parameter stability over temperature and supply voltage is mandatory.
FAQ
What is the maximum operating temperature range for the DG611EEQ-T1-GE3?
The DG611EEQ-T1-GE3 is fully specified from -40 °C to +125 °C, with electrical parameters validated across this full industrial temperature range. This includes on-resistance, leakage current, charge injection, and switching speed - ensuring reliable operation in under-hood automotive and factory-floor environments where ambient temperatures exceed 85 °C.
Does the DG611EEQ-T1-GE3 support dual-supply operation, and what are the limits?
Yes, the DG611EEQ-T1-GE3 supports dual-supply operation from ±3 V to ±8 V. Absolute maximum ratings allow V+ to V− differential up to +18 V, and individual supply pins tolerate -0.3 V to +18 V relative to GND. It is fully characterized at ±5 V, delivering 72 Ω RDS(on), 23 ns tON, and 1.4 pC charge injection under those conditions.
How does the DG611EEQ-T1-GE3 handle analog signals exceeding the supply rails?
The DG611EEQ-T1-GE3 includes internal clamping diodes on all S and D pins. Signals exceeding V+ or V− are clamped, but forward diode current must be limited to the device's maximum current ratings (30 mA continuous, 100 mA pulsed). External series resistors are recommended to protect against overvoltage transients beyond the clamp capability.
Is the DG611EEQ-T1-GE3 pin-compatible with earlier DG611 variants like the DG611A?
No - the DG611EEQ-T1-GE3 is not pin-compatible with the legacy DG611A. While both are quad NC SPST switches in TSSOP-16, the DG611EEQ-T1-GE3 features updated internal architecture, tighter specifications (e.g., 1.4 pC vs. 3 pC charge injection), and revised absolute maximum ratings. PCB layout reuse requires verification of pin function mapping and thermal pad requirements.
What is the logic behavior of the DG611EEQ-T1-GE3 control inputs?
The DG611EEQ-T1-GE3 has active-low logic: a logic low (≤0.8 V at +5 V supply) turns the switch ON (conducting), and a logic high (≥2 V at +5 V supply) turns it OFF (open). Input thresholds scale with supply voltage - e.g., at +3 V supply, logic high is ≥1.4 V - ensuring robust operation across its full 3–16 V single-supply range.
DG611EEQ-T1-GE3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 115Ohm
- Channel-to-Channel Matching (ΔRon):
- 600mOhm
- Voltage - Supply, Single (V+):
- 3V ~ 12V
- Voltage - Supply, Dual (V±):
- ±3V ~ 5V
- Switch Time (Ton, Toff) (Max):
- 50ns, 35ns
- -3db Bandwidth:
- 1GHz
- Charge Injection:
- 1.4pC
- Channel Capacitance (CS(off), CD(off)):
- 3pF, 3pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -74dB @ 10MHz
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
DG611EEQ-T1-GE3 FAQ
1.How can I place an order for DG611EEQ-T1-GE3 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG611EEQ-T1-GE3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG611EEQ-T1-GE3 reliable?
The price and inventory of DG611EEQ-T1-GE3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG611EEQ-T1-GE3 is usually 5 days.
3.What payment methods are accepted for DG611EEQ-T1-GE3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG611EEQ-T1-GE3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG611EEQ-T1-GE3?
DG611EEQ-T1-GE3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG611EEQ-T1-GE3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG611EEQ-T1-GE3?
For technical support, including DG611EEQ-T1-GE3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG611EEQ-T1-GE3 requirements.
6.How does Aetrix verify that DG611EEQ-T1-GE3 is sourced from the original manufacturer or authorized distributors?
All DG611EEQ-T1-GE3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG611EEQ-T1-GE3 meets industry standards.
7.What is the process for return or replacement of DG611EEQ-T1-GE3?
All DG611EEQ-T1-GE3 units undergo pre-shipment inspection (PSI). If there is an issue with DG611EEQ-T1-GE3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG611EEQ-T1-GE3 part is unused and in its original packaging.
Return procedure for DG611EEQ-T1-GE3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG611EEQ-T1-GE3 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
