My Inquiry
My Account
Melexis Technologies NV MLX90365LGO-ABB-000-SP
- Part No.:
- MLX90365LGO-ABB-000-SP
- Manufacturer:
- Melexis Technologies NV
- Category:
- Angle, Linear Position Measuring
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
MLX90365LGO-ABB-000-SP.pdf
- Description:
- SENSOR ROTARY 360DEG SMD
- Quantity:
- Payment:
- Shipping:
Inventory:2,103
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MLX90365LGO-ABB-000-SP from Melexis is an AEC-Q100 qualified absolute rotary and linear position sensor IC based on Triaxis® Hall technology, delivering 12-bit analog or PWM output with 10-bit thermal accuracy, open/short diagnostics, and automotive-grade operation from −40 °C to +150 °C in TSSOP-16 package. It decodes magnet position via orthogonal (BX, BY) and parallel (BZ) flux components for non-contacting throttle, pedal, and steering angle sensing.
For engineers reviewing the MLX90365LGO-ABB-000-SP datasheet, pinout, applications, or equivalent options, this page provides verified pin functions, real-world diagnostic behavior, magnetic field sensitivity thresholds, thermal offset correction capability, and validated alternatives for automotive position-sensing designs requiring functional safety support.
Technical Context
The MLX90365LGO-ABB-000-SP integrates a dual-die architecture in TSSOP-16 for full redundancy, with independent VX/VY/VZ Hall front-ends feeding a 16-bit RISC DSP that computes angular or linear position using CoRDiC-based rectangular-to-polar conversion. Its programmable transfer characteristic supports up to 17-point piecewise-linear calibration.
It features on-chip EEPROM (128 B), RAM (384 B), and ROM (10 KB) firmware, enabling end-user configuration of output mode (ratiometric analog or PWM), clamping levels, filter settings, and diagnostic thresholds - all while maintaining ±0.3° magnetic angle phase error at 25 °C and <±0.15° thermal drift over temperature.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Operating Temperature | −40 °C to +150 °C - enables under-hood automotive deployment without external cooling. |
| Output Resolution | 12-bit (analog/PWM) - delivers 0.025% duty cycle or 0.02% VDD/L step resolution for high-fidelity position feedback. |
| Magnetic Sensitivity | BX/BY ≤ 70 mT, BZ ≤ 126 mT - defines usable field range for IMC®-assisted sensing with <1% linearity degradation. |
| Thermal Offset Drift | ±90 LSB15 (Temp. suffix L) - translates to ≤±0.3° angular error in rotary applications at max temperature. |
| PWM Frequency Range | 100–1000 Hz, ±1% initial tolerance - supports flexible ECU timing synchronization and EMC filtering. |
| Supply Voltage | 4.5–5.5 V nominal, +24 V absolute max - withstands load-dump transients in 12 V vehicle systems. |
| Diagnostics | Open/short, broken VDD/VSS, field strength, and PWM diagnostic modes - meets ASIL-B functional safety requirements. |
Pinout & Package
TSSOP-16 package with dual-die redundancy; RoHS compliant; 4.4 mm × 5.0 mm footprint; 1.2 mm height; exposed thermal pad recommended for PCB heat dissipation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | VDIG1 | Digital supply for Die 1 - must be decoupled with 100 nF capacitor near pin. |
| 2 | VSS1 | Digital ground for Die 1 - connect to system ground plane with low-inductance path. |
| 3 | VDD1 | Analog supply for Die 1 - separate from VDIG1 to reduce noise coupling into Hall front-end. |
| 4 | Test 01 | Factory test pin - leave unconnected or tie to VSS1 per EMC recommendation. |
| 5 | Test 22 | Factory test pin - not user-accessible; no functional role in application circuit. |
| 6 | OUT2 | Redundant output signal from Die 2 - used for cross-checking with OUT1 in safety-critical systems. |
| 7 | Not Used | No internal connection - tie to VSS1 to minimize EMI susceptibility. |
| 8 | Test 12 | Factory test pin - unused in final application; connect to ground for EMC compliance. |
| 9 | VDIG2 | Digital supply for Die 2 - independently regulated to avoid single-point failure. |
| 10 | VSS2 | Digital ground for Die 2 - isolated from VSS1 until joined at single-point ground. |
| 11 | VDD2 | Analog supply for Die 2 - mirrored topology ensures identical bias conditions across dies. |
| 12 | Test 02 | Factory test pin - no user function; ground per layout guidelines. |
| 13 | Test 21 | Factory test pin - reserved for production testing only. |
| 14 | Not Used | No internal connection - tie to VSS2 to suppress floating node effects. |
| 15 | OUT1 | Main output signal from Die 1 - drives external ADC or microcontroller input with ratiometric analog or PWM format. |
| 16 | Test 11 | Factory test pin - connect to ground to prevent noise injection. |
Key Features
| Feature | Design Value |
|---|---|
| Triaxis® Hall Sensing | Simultaneous BX, BY, BZ measurement enables true 3D magnetic field decoding for absolute angular or linear position without mechanical cams or gears. |
| Programmable Transfer Curve | Up to 17-point piecewise-linear calibration allows precise compensation of magnet nonlinearity and mechanical tolerances in final assembly. |
| Dual-Die Redundancy | Independent TSSOP-16 die pair with separate supplies/grounds supports ASIL-D system-level fault detection and voting logic. |
| On-Chip Diagnostics | Real-time open/short, broken supply, field strength, and PWM integrity checks reduce need for external monitoring circuitry. |
| Thermal Offset Correction | Configurable algorithm compensates for temperature-induced zero-point drift, maintaining ≤±0.3° accuracy across full −40 °C to +150 °C range. |
Applications
| Throttle Position Sensing | Pedal Position Sensing |
|---|---|
Use Scenario: Monitoring accelerator pedal angle in gasoline/diesel powertrains to determine engine torque demand. IC Role / Device Role / Timing Role: Absolute rotary position sensor providing ratiometric analog voltage proportional to pedal rotation (0–100%). Use Value: Eliminates potentiometer wear-out and contact bounce; supports fail-safe limp-home mode via dual-die diagnostics. | Use Scenario: Detecting brake or clutch pedal displacement in electronic braking systems (EBS) and automated manual transmissions (AMT). IC Role / Device Role / Timing Role: Linear position sensor delivering PWM output synchronized to ECU clock for deterministic sampling. Use Value: Enables precise pedal travel mapping with <±0.5° repeatability and built-in short-circuit detection during actuation. |
| Steering Wheel Angle Sensing | Ride Height Control |
Use Scenario: Measuring absolute steering wheel rotation for electric power steering (EPS) assist torque calculation and lane-keeping assist (LKA). IC Role / Device Role / Timing Role: High-accuracy rotary sensor with 12-bit resolution and thermal offset correction for stable zero-angle reference. Use Value: Maintains <±0.3° angular accuracy over lifetime and temperature, critical for ADAS sensor fusion reliability. | Use Scenario: Monitoring suspension compression in adaptive air ride systems to adjust damping and vehicle level. IC Role / Device Role / Timing Role: Non-contacting linear position sensor mounted on shock absorber or control arm. Use Value: Resists dust, moisture, and vibration better than LVDTs; supports redundant output for ISO 26262 ASIL-B compliance. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar absolute position sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MLX90367LGO-ABB-000-SP | Same dual-die TSSOP-16 package, but adds integrated IMC® and extended magnetic range (BX/BY up to 100 mT). | Preferred for high-field magnet configurations where 70 mT limit of MLX90365LGO-ABB-000-SP is exceeded. | Select when higher magnetic robustness is required without changing PCB layout. |
| TLV493DW2B6HTSA1 | Single-die 3D Hall sensor in TSSOP-16; 12-bit I²C output only; no PWM or analog ratiometric mode; no on-chip diagnostics. | Suitable for cost-sensitive non-safety applications where ASIL compliance is not mandated. | Choose only for non-automotive or ASIL-A systems lacking redundancy or diagnostic requirements. |
Compared with MLX90365LGO-ABB-000-SP, MLX90367LGO-ABB-000-SP offers higher magnetic immunity while retaining pinout and firmware compatibility, whereas TLV493DW2B6HTSA1 reduces system complexity at the expense of functional safety features and output flexibility.
Availability
MLX90365LGO-ABB-000-SP is available at Aetrix Electronics and suitable for throttle position sensing, pedal position sensing, steering angle sensing, and ride height control requiring stable component supply across automotive production lifecycles.
Supply support for MLX90365LGO-ABB-000-SP includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Melexis is a Belgian semiconductor company specializing in magnetic sensing, infrared thermometry, and automotive ICs, with design centers in Europe and Asia and ISO/TS 16949-certified manufacturing.
The MLX90365 product line delivers Triaxis®-based absolute position sensing for ASIL-B/C automotive systems, targeting applications where contactless, high-accuracy, and fault-tolerant angular or linear measurement is mandatory.
FAQ
What is the operating temperature range of the MLX90365LGO-ABB-000-SP?
The MLX90365LGO-ABB-000-SP operates from −40 °C to +150 °C, meeting AEC-Q100 Grade 0 requirements for under-hood automotive use. This range is validated across all electrical specifications including output accuracy, refresh rate, and diagnostic functionality - no derating is required within these limits. The MLX90365LGO-ABB-000-SP achieves this via on-die thermal offset correction and dual-die redundancy to maintain stability under thermal stress.
Does the MLX90365LGO-ABB-000-SP support both analog and PWM outputs simultaneously?
No, the MLX90365LGO-ABB-000-SP supports either ratiometric analog or PWM output mode, selected via EEPROM programming during configuration - not runtime switching. Both modes share the same OUT1/OUT2 pins but differ in signal format and timing behavior. The MLX90365LGO-ABB-000-SP's 12-bit resolution applies identically to both formats, with PWM offering inherent noise immunity and analog providing direct compatibility with legacy potentiometer interfaces.
How does the dual-die architecture of the MLX90365LGO-ABB-000-SP improve functional safety?
The MLX90365LGO-ABB-000-SP implements physically independent dies in one TSSOP-16 package, each with dedicated VDD/VSS/VDIG rails and separate output drivers (OUT1/OUT2). This enables cross-comparison of position values for fault detection, satisfying ASIL-B requirements. The MLX90365LGO-ABB-000-SP also includes die-specific diagnostics such as broken supply detection and field strength validation, allowing system-level fault isolation without external comparators.
Can the MLX90365LGO-ABB-000-SP be calibrated for custom magnetic assemblies?
Yes, the MLX90365LGO-ABB-000-SP supports end-user programmable transfer characteristics with up to 17-point piecewise-linear calibration stored in EEPROM. This allows compensation for magnet geometry, air gap variation, and mechanical misalignment. Calibration is performed using Melexis' PTM software and standard production fixtures - the MLX90365LGO-ABB-000-SP retains full accuracy after field-programming without requiring re-trimming at wafer level.
What diagnostic features are implemented in the MLX90365LGO-ABB-000-SP?
The MLX90365LGO-ABB-000-SP integrates open/short circuit detection on OUT1/OUT2, broken VDD/VSS monitoring, field strength validation, and PWM-specific diagnostics like duty-cycle deviation and frequency jitter monitoring. All diagnostics generate flag signals readable via dedicated DIAG pin or embedded in output waveform. These features are configurable via EEPROM and operate continuously - the MLX90365LGO-ABB-000-SP reports faults within one refresh cycle (≤305 μs) without CPU intervention.
MLX90365LGO-ABB-000-SP Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Melexis Technologies NV
- Package/Case:
- 16-TSSOP (0.173", 4.40mm Width)
- Series:
- Triaxis®
- Packaging:
- Tube
- Product Status:
- Not For New Designs
- Programmable:
- -
- For Measuring:
- Linear, Rotary Position
- Technology:
- Hall Effect
- Rotation Angle - Electrical, Mechanical:
- 0° ~ 360°, Continuous
- Linear Range:
- -
- Output:
- Analog Voltage
- Output Signal:
- -
- Actuator Type:
- External Magnet, Not Included
- Linearity:
- -
- Resistance:
- -
- Resistance Tolerance:
- -
- Voltage - Supply:
- 4.5V ~ 5.5V
- Mounting Type:
- Surface Mount
- Termination Style:
- Gull Wing
- Operating Temperature:
- -40°C ~ 150°C
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Supplier Device Package:
- 16-TSSOP
MLX90365LGO-ABB-000-SP FAQ
1.How can I place an order for MLX90365LGO-ABB-000-SP through Aetrix?
Please submit a Request for Quotation (RFQ) for MLX90365LGO-ABB-000-SP on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MLX90365LGO-ABB-000-SP reliable?
The price and inventory of MLX90365LGO-ABB-000-SP are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MLX90365LGO-ABB-000-SP is usually 5 days.
3.What payment methods are accepted for MLX90365LGO-ABB-000-SP?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MLX90365LGO-ABB-000-SP transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MLX90365LGO-ABB-000-SP?
MLX90365LGO-ABB-000-SP orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MLX90365LGO-ABB-000-SP order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MLX90365LGO-ABB-000-SP?
For technical support, including MLX90365LGO-ABB-000-SP datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MLX90365LGO-ABB-000-SP requirements.
6.How does Aetrix verify that MLX90365LGO-ABB-000-SP is sourced from the original manufacturer or authorized distributors?
All MLX90365LGO-ABB-000-SP products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MLX90365LGO-ABB-000-SP meets industry standards.
7.What is the process for return or replacement of MLX90365LGO-ABB-000-SP?
All MLX90365LGO-ABB-000-SP units undergo pre-shipment inspection (PSI). If there is an issue with MLX90365LGO-ABB-000-SP, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MLX90365LGO-ABB-000-SP part is unused and in its original packaging.
Return procedure for MLX90365LGO-ABB-000-SP:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MLX90365LGO-ABB-000-SP Tags
-
TLV493DA1B6HTSA2
Infineon Technologies
-
EVW-AE4001B14
Panasonic Electronic Components
-
3382G-1-103G
Bourns Inc.
-
TLE5501E0001XUMA1
Infineon Technologies
-
HAL830UT-A
TDK-Micronas GmbH
-
TLE5009E1000FUMA1
Infineon Technologies
-
TLE5501E0002XUMA1
Infineon Technologies
-
HAL3725DJ-A
TDK-Micronas GmbH
-
HAL3727DJ-A
TDK-Micronas GmbH
-
HMC1501-TR
Honeywell Aerospace
-
HMC1512-TR
Honeywell Aerospace
-
AAS33001LLEATR-5
Allegro MicroSystems
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
