My Inquiry
My Account
Melexis Technologies NV MLX90380LDC-BAB-100-SP
- Part No.:
- MLX90380LDC-BAB-100-SP
- Manufacturer:
- Melexis Technologies NV
- Category:
- Angle, Linear Position Measuring
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
MLX90380LDC-BAB-100-SP.pdf
- Description:
- SENSOR ROTARY 360DEG SMD
- Quantity:
- Payment:
- Shipping:
Inventory:2,576
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MLX90380LDC-BAB-100-SP from Melexis is a monolithic Triaxis® Hall-based resolver IC delivering true 360° sine/cosine analog outputs for absolute rotary position sensing. It operates from 3.3V or 5V supply, supports -40°C to 150°C ambient, features 4 µs output refresh rate, and is factory-programmed for NdFeB magnet compatibility with X/Y magnetic axis and 40 mT full-scale range.
For engineers reviewing the MLX90380LDC-BAB-100-SP datasheet, pinout, applications, or equivalent options, this device serves as a high-temperature, contactless angular position sensor in motor control feedback loops where ratiometric analog outputs, programmable bandwidth, and end-of-shaft/through-shaft flexibility are required.
Technical Context
The MLX90380LDC-BAB-100-SP implements Triaxis® technology to simultaneously sense orthogonal (X/Y) magnetic field components using integrated Hall elements and on-chip signal conditioning. Its dual analog outputs (OUT1 = COS, OUT2 = SIN) are ratiometric to VDD, with factory-set sensitivity of 1 %VDD/mT and linearity better than ±0.5% over 360° at VDD = 5V.
It supports three programmable bandwidth modes (low/medium/high), with tracking delay ranging from 12 µs (high BW) to 85.5 µs (low BW), and enables dynamic angular error compensation via external MCU processing of the sine/cosine pair. The SOIC-8 package integrates all functionality without external magnetics or coils.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Type | Dual ratiometric analog: OUT1 (COS), OUT2 (SIN), each spanning 5–95% VDD |
| Output Refresh Rate | 4 µs - enables real-time angle reconstruction up to 25,000 rpm with <1° total angular error after dynamic compensation |
| Supply Voltage | 3.135–3.6 V or 4.5–5.5 V - dual-rail support allows direct interface with 3.3V or 5V MCUs without level shifting |
| Operating Temperature | -40°C to +150°C - qualified for under-hood automotive and industrial motor drive environments |
| Magnetic Range | 40 mT full-scale (BAB-100 variant) - optimized for NdFeB magnets in end-of-shaft configurations |
| Linearity Error | ±0.5% (VDD = 5V, output 0.5–4.5 V) - ensures sub-degree angular resolution before software correction |
| Sensitivity | 1 %VDD/mT - delivers 50 mV/mT output swing at 5V, matching typical ADC input ranges without amplification |
Pinout & Package
MLX90380LDC-BAB-100-SP is housed in an 8-pin SOIC-8 package (JEDEC MS-012AC) with 1.27 mm pitch, surface-mount footprint, and exposed pad not connected internally. Pin 2 and Pin 4 are NC; Pin 3 (TEST) and unused pins must be tied to GND for optimal EMC performance.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (VSS) | Supply Ground | Primary ground reference for analog and digital circuitry; must be low-impedance connection to system GND |
| 2 (NC) | Not Connected | No internal connection; tie to GND per EMC recommendation |
| 3 (TEST) | Test Pin | Factory test access; tie to GND in application to suppress noise coupling |
| 4 (NC) | Not Connected | No internal connection; tie to GND per EMC recommendation |
| 5 (OUT2) | Analog Output SIN | Ratiometric voltage proportional to sin(θ); drives ADC input directly with ≤10 kΩ load |
| 6 (VDD5V) | 5V Supply Input | Active supply rail when operating at 5V; VDD3V3 must be left floating in this mode |
| 7 (VDD3V3) | 3.3V Supply Input | Active supply rail when operating at 3.3V; VDD5V must be left floating in this mode |
| 8 (OUT1) | Analog Output COS | Ratiometric voltage proportional to cos(θ); paired with OUT2 for arctan(OUT2/OUT1) angle computation |
Key Features
| Feature | Design Value |
|---|---|
| Triaxis® Hall Sensing | Simultaneous orthogonal X/Y field measurement eliminates need for external flux concentrators or multi-die assemblies |
| Selectable Magnetic Axis | X/Y configuration (BAB-100) enables direct end-of-shaft mounting with standard two-pole magnets |
| Programmable Bandwidth | Three user-selectable filter settings (low/medium/high) adjust tracking delay from 12 µs to 85.5 µs to match motor dynamics |
| Ratiometric Outputs | OUT1/OUT2 scale precisely with VDD, removing supply variation impact on angle accuracy |
| Factory Calibration | Pre-programmed for NdFeB magnet, 40 mT range, X/Y axis, and 1 %VDD/mT sensitivity - no field calibration required |
Applications
| Brushless Motor Rotor Position | Electric Power Steering (EPS) |
|---|---|
Use Scenario: Real-time angular feedback for FOC (Field-Oriented Control) in PMSM and BLDC motors driving HVAC blowers, pumps, or traction inverters. IC Role / Device Role / Timing Role: Resolver replacement providing analog sine/cosine signals synchronized to rotor position with 4 µs update latency. Use Value: Enables high-bandwidth torque control up to 25,000 rpm while maintaining <1° total angular error after dynamic offset/gain correction in MCU. |
Use Scenario: Absolute steering angle measurement in automotive EPS systems requiring ASIL-B compliance and extended temperature operation. IC Role / Device Role / Timing Role: Primary contactless position sensor mounted on steering column, interfacing directly with 3.3V or 5V safety MCU ADC inputs. Use Value: Delivers ratiometric outputs immune to supply ripple, supporting functional safety diagnostics including signal plausibility and amplitude monitoring. |
| Industrial Servo Motor Feedback | Rotary Actuator Position |
Use Scenario: High-accuracy shaft angle detection in closed-loop servo drives for CNC machines, robotics joints, and packaging equipment. IC Role / Device Role / Timing Role: Analog resolver substitute generating true 360° position data without interpolation or encoder quadrature decoding. Use Value: Eliminates optical encoder fragility and magnetic encoder limited resolution; achieves ±0.5% linearity enabling <0.1° mechanical resolution with 12-bit ADC. |
Use Scenario: Compact position sensing in space-constrained rotary actuators used in valve control, aerospace flaps, and medical devices. IC Role / Device Role / Timing Role: End-of-shaft mounted IC converting magnet rotation into calibrated sine/cosine voltages for microcontroller-based angle computation. Use Value: SOIC-8 footprint and through-hole-compatible layout simplifies integration; 150°C rating supports sealed actuator housings with minimal thermal derating. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar absolute rotary position sensing applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MLX90380LDC-BAA-100-RE | Uses SmCo magnet instead of NdFeB; identical SOIC-8 package, X/Y axis, 40 mT range, and 3.3V/5V supply | Better high-temperature stability above 120°C due to SmCo's lower TCS drift; preferred for extreme ambient conditions | Select BAA-100 if magnet temperature exceeds 120°C or long-term aging stability is critical; otherwise BAB-100 offers cost advantage with NdFeB |
| MLX90380LGO-BAB-100-RE | TSSOP-16 dual-die fully redundant architecture; same magnetic specs but doubled fault coverage and AEC-Q100 Grade 0 qualification | Required for ASIL-D systems where single-point failure mitigation is mandated; occupies larger PCB area and requires dual power routing | Choose LGO-BAB-100 only when functional safety certification (ISO 26262) demands hardware redundancy; LDC-BAB-100 suffices for ASIL-B or non-automotive use |
Compared with MLX90380LDC-BAA-100-RE, the MLX90380LDC-BAB-100-SP trades marginal high-temperature drift performance for NdFeB cost efficiency, while MLX90380LGO-BAB-100-RE adds redundancy overhead for safety-critical deployment - making the LDC-BAB-100-SP optimal for cost-sensitive, high-volume industrial and mid-tier automotive motor control.
Availability
MLX90380LDC-BAB-100-SP is available at Aetrix Electronics and suitable for brushless motor control, electric power steering, and industrial servo applications requiring stable component supply across extended temperature ranges and multi-year production cycles.
Supply support for MLX90380LDC-BAB-100-SP includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Melexis is a Belgian semiconductor company specializing in intelligent sensors and driver ICs for automotive and industrial markets, with expertise in magnetic sensing, thermal imaging, and LIN/CAN connectivity.
The MLX90380 product line delivers contactless angular position sensing using Triaxis® Hall technology, designed specifically for high-reliability motor control, steering, and actuation systems demanding robustness across -40°C to 150°C.
FAQ
What is the magnetic axis configuration of MLX90380LDC-BAB-100-SP?
The MLX90380LDC-BAB-100-SP is factory-programmed for X/Y magnetic axis configuration, meaning OUT1 responds to the BX field component and OUT2 to the BY component. This enables direct end-of-shaft mounting with two-pole magnets aligned parallel to the IC surface, as confirmed in Table 2 and Figure 6 of the datasheet.
Does MLX90380LDC-BAB-100-SP support both 3.3V and 5V supply rails simultaneously?
No - MLX90380LDC-BAB-100-SP uses separate VDD3V3 and VDD5V pins but operates on only one supply at a time. When powered from 3.3V, VDD5V must be left floating; when powered from 5V, VDD3V3 must be left floating. This isolation prevents cross-rail interference and is specified in Section 9.1 and Figure 12–13 of the datasheet.
What is the full-scale magnetic range and sensitivity of MLX90380LDC-BAB-100-SP?
The MLX90380LDC-BAB-100-SP has a factory-set full-scale magnetic range of 40 mT and sensitivity of 1 %VDD/mT. At 5V supply, this yields ±50 mV/mT output swing, resulting in a total output span of 4 V (5–95% VDD), as defined in Table 2 (BAB-100 = 40 mT) and Section 12 specifications.
Can MLX90380LDC-BAB-100-SP be used in through-shaft configurations?
Yes - although MLX90380LDC-BAB-100-SP is configured for X/Y axis (optimized for end-of-shaft), it can also operate in through-shaft setups using multi-pole magnets off-axis. The datasheet explicitly states X/Y axis compatibility with "two pole magnet end of shaft / on axis and multi-pole magnet off-axis / through-shaft application" in footnote 3 of Table 2.
What is the maximum rotational speed supported by MLX90380LDC-BAB-100-SP?
The MLX90380LDC-BAB-100-SP supports up to 25,000 rpm with high-bandwidth programming, achieving 1.6 samples per degree and <1.8° signal phase shift at that speed. This capability is verified in Table 8 (Magnetic Specifications) and assumes proper MCU-side dynamic compensation for total angular error reduction.
MLX90380LDC-BAB-100-SP Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Melexis Technologies NV
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Series:
- Triaxis®
- Packaging:
- Bulk
- Product Status:
- Active
- Programmable:
- -
- For Measuring:
- Linear, Rotary Position
- Technology:
- Hall Effect
- Rotation Angle - Electrical, Mechanical:
- 0° ~ 360°, Continuous
- Linear Range:
- -
- Output:
- -
- Output Signal:
- -
- Actuator Type:
- External Magnet, Not Included
- Linearity:
- -
- Resistance:
- -
- Resistance Tolerance:
- -
- Voltage - Supply:
- 3.135V ~ 3.6V
- Mounting Type:
- Surface Mount
- Termination Style:
- Gull Wing
- Operating Temperature:
- -40°C ~ 150°C
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- 8-SOIC
MLX90380LDC-BAB-100-SP FAQ
1.How can I place an order for MLX90380LDC-BAB-100-SP through Aetrix?
Please submit a Request for Quotation (RFQ) for MLX90380LDC-BAB-100-SP on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MLX90380LDC-BAB-100-SP reliable?
The price and inventory of MLX90380LDC-BAB-100-SP are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MLX90380LDC-BAB-100-SP is usually 5 days.
3.What payment methods are accepted for MLX90380LDC-BAB-100-SP?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MLX90380LDC-BAB-100-SP transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MLX90380LDC-BAB-100-SP?
MLX90380LDC-BAB-100-SP orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MLX90380LDC-BAB-100-SP order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MLX90380LDC-BAB-100-SP?
For technical support, including MLX90380LDC-BAB-100-SP datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MLX90380LDC-BAB-100-SP requirements.
6.How does Aetrix verify that MLX90380LDC-BAB-100-SP is sourced from the original manufacturer or authorized distributors?
All MLX90380LDC-BAB-100-SP products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MLX90380LDC-BAB-100-SP meets industry standards.
7.What is the process for return or replacement of MLX90380LDC-BAB-100-SP?
All MLX90380LDC-BAB-100-SP units undergo pre-shipment inspection (PSI). If there is an issue with MLX90380LDC-BAB-100-SP, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MLX90380LDC-BAB-100-SP part is unused and in its original packaging.
Return procedure for MLX90380LDC-BAB-100-SP:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MLX90380LDC-BAB-100-SP Tags
-
TLV493DA1B6HTSA2
Infineon Technologies
-
EVW-AE4001B14
Panasonic Electronic Components
-
3382G-1-103G
Bourns Inc.
-
TLE5501E0001XUMA1
Infineon Technologies
-
HAL830UT-A
TDK-Micronas GmbH
-
TLE5009E1000FUMA1
Infineon Technologies
-
TLE5501E0002XUMA1
Infineon Technologies
-
HAL3725DJ-A
TDK-Micronas GmbH
-
HAL3727DJ-A
TDK-Micronas GmbH
-
HMC1501-TR
Honeywell Aerospace
-
HMC1512-TR
Honeywell Aerospace
-
AAS33001LLEATR-5
Allegro MicroSystems
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
