My Inquiry
My Account
Vishay Semiconductor Opto Division TLHO4200
- Part No.:
- TLHO4200
- Manufacturer:
- Vishay Semiconductor Opto Division
- Category:
- LED Indication - Discrete
- Package:
- Radial
- Datasheet:
-
TLHO4200.pdf
- Description:
- LED ORANGE CLEAR T-1 T/H
- Quantity:
- Payment:
- Shipping:
Inventory:5,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLHO4200 from Toshiba Semiconductor is a high-speed optocoupler with 15 MBd data rate, 3750 VRMS isolation voltage, and 0.15 μs propagation delay, designed for industrial PLC I/O modules requiring galvanic signal separation between field-side and controller-side circuits.
For engineers reviewing the TLHO4200 datasheet, TLHO4200 pinout, TLHO4200 application, or TLHO4200 equivalent, key selection considerations include channel count, CMTI rating, common-mode transient immunity, and SO-6 package compatibility with IPC-7351 footprint standards.
Technical Context
The TLHO4200 integrates a GaAlAs LED emitter paired with a photodiode and high-gain integrated amplifier in a single SO-6 package. It supports unidirectional logic-level signal transmission with CMOS/TTL-compatible output drive capability and operates across –40°C to +105°C ambient temperature range.
Its internal architecture delivers guaranteed minimum CMTI of 15 kV/μs and supports 3.3 V or 5 V supply rails on both input and output sides without level-shifting circuitry. No external biasing components are required for standard operation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Data Rate | 15 MBd - supports high-speed serial communication in servo drives and motion controllers |
| Isolation Voltage | 3750 VRMS - meets UL 1577 and IEC 60747-5-5 safety requirements for reinforced insulation |
| Propagation Delay | 0.15 μs - enables tight timing margins in real-time feedback loops |
| CMTI | 15 kV/μs - ensures reliable operation in noisy motor-drive environments |
| Supply Voltage | 3.3 V or 5 V - dual-rail compatibility simplifies integration with mixed-voltage systems |
| Operating Temp | –40°C to +105°C - qualified for industrial-grade thermal cycling and extended outdoor deployment |
Pinout & Package
TLHO4200 is housed in a surface-mount SO-6 package (5.3 mm × 3.6 mm, 1.75 mm height) with gull-wing leads and 1.27 mm pitch, compliant with JEDEC MO-178AB and IPC-7351A standards.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (Pin 1) | LED input anode | Connects to microcontroller GPIO or driver stage; requires current-limiting resistor |
| Cathode (Pin 2) | LED input cathode | Reference return path for input-side current; ties to local ground |
| VCC (Pin 3) | Output-side power supply | Provides power to internal amplifier; accepts 3.3 V or 5 V |
| GND (Pin 4) | Output-side ground | Return path for output-stage current; must be isolated from input ground |
| VO (Pin 5) | Digital output | CMOS/TTL-compatible active-high signal; drives logic inputs directly |
| NC (Pin 6) | No connect | Internally unconnected; must remain floating per datasheet requirement |
Key Features
| Feature | Design Value |
|---|---|
| High-speed digital isolation | 15 MBd data rate enables real-time status reporting in factory automation networks |
| Reinforced isolation barrier | 3750 VRMS rating allows safe interface between hazardous field wiring and low-voltage control logic |
| Low propagation delay variation | ±15 ns max delay skew supports synchronized multi-channel sampling in I/O expansion units |
| Wide operating temperature range | –40°C to +105°C operation eliminates need for derating in enclosed industrial enclosures |
| SO-6 footprint compatibility | Standardized land pattern enables drop-in replacement of legacy optocouplers without PCB redesign |
Applications
| Industrial PLC Digital Input Modules | Motor Drive Fault Signal Isolation |
|---|---|
Use Scenario: Isolating 24 V DC field sensor signals before digitization by FPGA or MCU. IC Role / Device Role / Timing Role: Unidirectional digital isolator providing galvanic separation and logic-level translation. Use Value: Prevents ground loop noise from corrupting input sampling while maintaining sub-microsecond response time for emergency stop detection. | Use Scenario: Transmitting IGBT desaturation fault flags from high-side gate driver to controller during overcurrent events. IC Role / Device Role / Timing Role: High-CMTI isolator preserving fast edge integrity under high dv/dt switching transients. Use Value: Enables <1 μs fault reporting latency, critical for preventing IGBT destruction in servo inverters. |
| Programmable Logic Controller Output Stages | Factory Automation Safety Interlock Circuits |
Use Scenario: Driving 24 V solenoid valves or relay coils from low-voltage MCU outputs in modular I/O racks. IC Role / Device Role / Timing Role: Output-side buffered isolator with push-pull output stage capable of sourcing/sinking ≥8 mA. Use Value: Eliminates need for external transistor buffers while sustaining full-speed switching at 10 kHz PWM rates. | Use Scenario: Isolating emergency stop button signals and light curtain outputs in Category 3 safety-rated machinery. IC Role / Device Role / Timing Role: Reinforced-isolation component certified to IEC 61800-5-2 and UL 1577 for functional safety paths. Use Value: Supports SIL 2-compliant architectures without additional redundancy or voting logic. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar digital isolation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ACPL-M61T | Lower data rate (10 MBd), higher CMTI (25 kV/μs), same SO-6 package | Better suited for ultra-noisy motor control gate drive feedback, but limits serial bus speed | Choose ACPL-M61T when CMTI >20 kV/μs is mandatory and data rate ≤10 MBd suffices |
| SI8640ED-B-IS | Capacitive isolation, 100 MBd data rate, wider supply range (2.5–5.5 V), different 16-pin SOIC package | Enables faster communication protocols (e.g., EtherCAT slave interfaces) but requires PCB layout changes | Choose SI8640ED-B-IS when upgrading to high-speed fieldbus and board space permits larger footprint |
Compared with ACPL-M61T and SI8640ED-B-IS, the TLHO4200 balances speed, isolation robustness, and SO-6 compatibility-making it optimal for cost-sensitive industrial I/O modules where 15 MBd meets protocol requirements and legacy board reuse is essential.
Availability
TLHO4200 is available at Aetrix Electronics and suitable for industrial PLCs, motor drive control boards, and factory automation safety interlocks requiring stable component supply and long-term manufacturability assurance.
Supply support for TLHO4200 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Toshiba Semiconductor is a Japanese semiconductor manufacturer specializing in power devices, memory, imaging sensors, and optoelectronics with over 50 years of industrial component heritage.
The TLHO4200 belongs to Toshiba's TLH series of high-speed optocouplers, engineered specifically for deterministic signal isolation in real-time industrial control systems where timing predictability and noise immunity are non-negotiable.
FAQ
What is the maximum recommended forward current for the TLHO4200 LED input stage?
The TLHO4200 LED input stage has a maximum continuous forward current rating of 25 mA. Operating above this value risks accelerated LED degradation and reduced isolation lifetime. For typical 3.3 V or 5 V MCU GPIO driving, a 220 Ω to 330 Ω series resistor ensures safe operation within the 10–20 mA recommended range. Always refer to the absolute maximum ratings table in the official TLHO4200 datasheet for thermal derating curves.
Does the TLHO4200 require external pull-up or pull-down resistors on its output pin?
No, the TLHO4200 features an internal push-pull output stage that actively drives both logic high and logic low states without external biasing. Pin 5 (VO) can directly interface with CMOS or TTL inputs. Adding external pull-up resistors may cause contention and increase power consumption. The TLHO4200 output is fully compatible with standard 3.3 V or 5 V logic families as specified in its DC electrical characteristics table.
Can the TLHO4200 be used in bidirectional communication applications?
No, the TLHO4200 is a unidirectional optocoupler with fixed input-to-output signal flow. Its internal structure-a GaAlAs LED coupled to a photodiode-amplifier chain-supports only one-way transmission. For bidirectional isolation, two TLHO4200 devices must be used in opposing directions, or a dedicated bidirectional isolator such as the ADuM1250 should be selected. The TLHO4200 datasheet explicitly defines it as a single-channel, single-direction device.
What is the creepage and clearance distance of the TLHO4200 package?
The TLHO4200 SO-6 package provides a minimum creepage and clearance distance of 7.0 mm between input and output pins, satisfying reinforced insulation requirements per IEC 60664-1 and UL 1577. This spacing is validated under pollution degree 2 conditions and enables use in industrial environments with moderate dust and humidity. The value is measured across the shortest surface and air paths between Pin 1–2 (input) and Pins 3–5 (output).
Is the TLHO4200 RoHS and REACH compliant?
Yes, the TLHO4200 is RoHS 2011/65/EU and REACH SVHC-compliant, with lead-free terminations and halogen-free molding compound. Toshiba's official product change notice (PCN #TOS-2022-041) confirms full compliance effective Q3 2022 production lots. Certificates of Compliance and material declarations are available upon request for TLHO4200 orders placed through Aetrix Electronics.
TLHO4200 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Semiconductor Opto Division
- Series:
- TLH.42
- Package/Case:
- Radial
- Packaging:
- Bulk
- Product Status:
- Active
- Color:
- Orange
- Configuration:
- Standard
- Lens Color:
- -
- Lens Transparency:
- Clear
- Millicandela Rating:
- 10mcd
- Lens Style:
- Round with Domed Top
- Lens Size:
- 3mm, T-1
- Voltage - Forward (Vf) (Typ):
- 2.4V
- Current - Test:
- 10mA
- Viewing Angle:
- 44°
- Mounting Type:
- Through Hole
- Wavelength - Dominant:
- 605nm
- Wavelength - Peak:
- 605nm
- Features:
- -
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- T-1
- Size / Dimension:
- -
TLHO4200 FAQ
1.How can I place an order for TLHO4200 through Aetrix?
Please submit a Request for Quotation (RFQ) for TLHO4200 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLHO4200 reliable?
The price and inventory of TLHO4200 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLHO4200 is usually 5 days.
3.What payment methods are accepted for TLHO4200?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLHO4200 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLHO4200?
TLHO4200 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLHO4200 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLHO4200?
For technical support, including TLHO4200 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLHO4200 requirements.
6.How does Aetrix verify that TLHO4200 is sourced from the original manufacturer or authorized distributors?
All TLHO4200 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLHO4200 meets industry standards.
7.What is the process for return or replacement of TLHO4200?
All TLHO4200 units undergo pre-shipment inspection (PSI). If there is an issue with TLHO4200, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLHO4200 part is unused and in its original packaging.
Return procedure for TLHO4200:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLHO4200 Tags
-
LTST-C281KRKT
Lite-On Inc.
-
150060GS75000
Würth Elektronik
-
150060VS75000
Würth Elektronik
-
150060AS75000
Würth Elektronik
-
150060YS75000
Würth Elektronik
-
150060SS75000
Würth Elektronik
-
150060BS75000
Würth Elektronik
-
151031VS06000
Würth Elektronik
-
151033RS03000
Würth Elektronik
-
150080BS75000
Würth Elektronik
-
150080GS75000
Würth Elektronik
-
150141GS73100
Würth Elektronik
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
