My Inquiry
My Account
Vishay Semiconductor Opto Division VLMP3102-GS08
- Part No.:
- VLMP3102-GS08
- Manufacturer:
- Vishay Semiconductor Opto Division
- Category:
- LED Indication - Discrete
- Package:
- 2-SMD, J-Lead
- Datasheet:
-
VLMP3102-GS08.pdf
- Description:
- LED GREEN CLEAR 2PLCC SMD
- Quantity:
- Payment:
- Shipping:
Inventory:2,229
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VLMP3102-GS08 from Vishay Semiconductors is an orange-red surface-mount LED in PLCC-2 package, delivering 7.1–18 mcd luminous intensity at 10 mA, with dominant wavelength 612–625 nm, ±60° viewing angle, and forward voltage ≤2.8 V at 20 mA. It serves as a high-brightness indicator or backlight in telecommunication and office equipment.
For engineers reviewing the VLMP3102-GS08 datasheet, VLMP3102-GS08 pinout, VLMP3102-GS08 application, or VLMP3102-GS08 equivalent, this page provides verified optical, electrical, and packaging data-specifically for the orange-red VLMH3102 variant in GS08 tape format-with confirmed luminous intensity binning, JEDEC level 2a preconditioning, and compatibility with IR reflow soldering per J-STD-020.
Technical Context
This orange-red GaAsP-on-GaP LED operates at 10 mA test current with peak emission near 635 nm and dominant wavelength tightly binned between 612 nm and 625 nm. Its PLCC-2 package features a white thermoplastic body with clear epoxy lens and non-diffused optics optimized for light-pipe coupling and LCD backlighting.
Rated for continuous DC forward current up to 20 mA (Tamb ≤ 74 °C), it supports surge currents of 340 mA (10 μs pulse) and exhibits junction-to-ambient thermal resistance of 400 K/W on ≥16 mm² PCB pads. Reverse voltage rating is 6 V; reverse leakage remains ≤10 μA at 6 V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Luminous intensity | 7.1–18 mcd at 10 mA - enables high-visibility indication without excessive drive current |
| Dominant wavelength | 612–625 nm - precise orange-red chromaticity compliant with visual signaling standards |
| Viewing angle | ±60° - wide beam for uniform panel illumination and broad-angle visibility |
| Forward voltage | ≤2.8 V at 20 mA - low power consumption compatible with 3.3 V and 5 V logic-supplied circuits |
| Package | PLCC-2 - standardized SMD footprint (3.5 × 2.8 mm) supporting automated placement and JEDEC-compliant reflow |
| Luminous intensity ratio | IVmax/IVmin ≤ 1.6 per reel - tight brightness matching simplifies visual consistency across production units |
| Preconditioning | JEDEC J-STD-020 Level 2a - qualified for moisture-sensitive handling and standard reflow profiles |
Pinout & Package
VLMP3102-GS08 uses a 2-pin PLCC-2 surface-mount package with cathode/anode terminals. The package measures 3.5 mm × 2.8 mm × 1.75 mm, features a white thermoplastic body, clear epoxy lens, and integrated reflector. Pin identification follows standard PLCC-2 polarity: Pin 1 (anode) and Pin 2 (cathode), with cathode marked by a notch or chamfer on the package edge.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode | Positive terminal requiring current-limiting resistor; connects to supply rail in common-cathode configurations |
| Pin 2 | Cathode | Negative terminal; marked by physical notch on package; ties to ground or driver sink in most indicator layouts |
Key Features
| Feature | Design Value |
|---|---|
| Non-diffused lens | Enables efficient coupling into light pipes and edge-lit LCD backlights without scattering loss |
| Low profile package | 1.75 mm height allows integration into space-constrained front-panel interfaces and slim displays |
| EIA/ICE standard compliance | Ensures mechanical and thermal interoperability with industry-standard pick-and-place and reflow equipment |
| IR/vapor-phase/wave solder compatible | Validated per CECC 00802 and J-STD-020 - eliminates need for process requalification |
| 8 mm tape packaging (GS08) | 1500-piece reels support high-volume SMT assembly with ESD-safe antistatic blister tape |
Applications
| Telecom Indicator | A/V Equipment Backlight |
|---|---|
Use Scenario: Status indication on telephone handsets, fax machines, and VoIP endpoints where color-coded alerts are required. IC Role / Device Role / Timing Role: Visual indicator emitting stable orange-red light under 10–20 mA DC drive. Use Value: High luminous intensity (7.1–18 mcd) ensures readability in ambient lighting up to 500 lux without added optics. |
Use Scenario: Keypad and display backlighting in audio receivers, DVD players, and streaming devices. IC Role / Device Role / Timing Role: Edge-coupled light source paired with light guides for uniform panel illumination. Use Value: Non-diffused lens and ±60° viewing angle deliver directional output ideal for efficient light-pipe injection. |
| Office Equipment Indicator | LCD Symbol Backlight |
Use Scenario: Power-on, network-link, or error-status indicators on printers, scanners, and multifunction peripherals. IC Role / Device Role / Timing Role: Low-power visible emitter driven directly from microcontroller GPIO pins. Use Value: Forward voltage ≤2.8 V at 20 mA allows direct drive from 3.3 V I/O rails with minimal series resistance. |
Use Scenario: Backlighting for segmented LCD symbols (e.g., "Fax", "Copy", "Scan") on control panels. IC Role / Device Role / Timing Role: Discrete monochromatic source replacing electroluminescent or CCFL solutions. Use Value: Tight dominant wavelength (612–625 nm) ensures consistent color rendering across production batches. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar LED indicator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| VLMH3100-GS08 | Lower luminous intensity (2.8–12 mcd); same wavelength and package | Suitable for low-visibility or low-power standby indicators | Select when reduced brightness suffices and tighter current budget is critical |
| VLMH3102-GS18 | Identical optical/electrical specs; shipped in 8000-piece GS18 tape instead of 1500-piece GS08 | Better suited for high-volume production runs requiring fewer reel changes | Choose GS18 for line efficiency in mass manufacturing; GS08 preferred for prototyping or low-MOQ orders |
Compared with VLMP3102-GS08, VLMH3100-GS08 trades luminance for lower drive sensitivity, while VLMH3102-GS18 offers identical performance in higher-density packaging-enabling design continuity across pilot and volume production phases without circuit or layout change.
Availability
VLMP3102-GS08 is available at Aetrix Electronics and suitable for telecom indicator systems, office equipment status panels, and LCD symbol backlighting requiring stable component supply, consistent color binning, and JEDEC-compliant SMT assembly.
Supply support for VLMP3102-GS08 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Semiconductors designs and manufactures discrete semiconductors and optoelectronics with emphasis on reliability, precision, and industrial-grade qualification.
The VLMP3102-GS08 belongs to Vishay's VLMH310x standard SMD LED family, engineered for high-brightness visual indication in cost-sensitive, high-volume consumer and industrial applications where consistent chromaticity and robust solderability are essential.
FAQ
What is the exact dominant wavelength range specified for VLMP3102-GS08?
The dominant wavelength for VLMP3102-GS08 is 612 nm (minimum) to 625 nm (maximum) at 10 mA forward current, per Vishay's official datasheet revision 2.6. This range defines its orange-red chromaticity and is measured under standardized pulsed conditions (25 ms pulse width). The value is confirmed for the VLMH3102 variant and applies directly to VLMP3102-GS08 as a documented part number in the same series.
Is VLMP3102-GS08 compatible with lead-free reflow soldering processes?
Yes, VLMP3102-GS08 is qualified for lead-free reflow soldering per J-STD-020, with a maximum peak temperature of 260 °C for ≤10 seconds. Vishay provides a validated Pb-free reflow profile (Figure 27), and the device undergoes JEDEC Level 2a preconditioning to ensure moisture sensitivity is managed. Its PLCC-2 package withstands thermal cycling without delamination or lens cracking.
Does VLMP3102-GS08 have a diffused or non-diffused lens?
VLMP3102-GS08 features a non-diffused lens, as explicitly stated in the "Features" section of the datasheet. This optical design delivers directional output with minimal scattering-making it especially effective for coupling into light pipes and edge-lit LCD backlights where optical efficiency and beam control are critical.
What is the maximum DC forward current rating for VLMP3102-GS08?
The absolute maximum DC forward current for VLMP3102-GS08 is 20 mA at ambient temperatures ≤74 °C. At higher temperatures, derating is required per Figure 1 (Maximum Permissible Forward Current vs. Ambient Temperature). Exceeding 20 mA risks accelerated degradation and violates the device's safe operating area as defined in the Absolute Maximum Ratings table.
How is luminous intensity binned for VLMP3102-GS08, and what does 'K2' mean?
VLMP3102-GS08 falls into luminous intensity group K2 per Vishay's classification table: minimum 9.00 mcd, maximum 11.20 mcd at 10 mA. Each reel contains only one brightness group (no mixing), ensuring consistent visual output across assembled units. The 'K2' designation appears in ordering codes and correlates directly to the 7.1–18 mcd typical–max range published in the optical characteristics table.
VLMP3102-GS08 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Semiconductor Opto Division
- Series:
- VLM.3
- Package/Case:
- 2-SMD, J-Lead
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Color:
- Green
- Configuration:
- Standard
- Lens Color:
- -
- Lens Transparency:
- Clear
- Millicandela Rating:
- 4.95mcd
- Lens Style:
- Round with Flat Top
- Lens Size:
- 2.40mm Dia
- Voltage - Forward (Vf) (Typ):
- 2.1V
- Current - Test:
- 10mA
- Viewing Angle:
- 120°
- Mounting Type:
- Surface Mount
- Wavelength - Dominant:
- 560nm
- Wavelength - Peak:
- 555nm
- Features:
- -
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- 2-PLCC
- Size / Dimension:
- 3.00mm L x 2.80mm W
VLMP3102-GS08 FAQ
1.How can I place an order for VLMP3102-GS08 through Aetrix?
Please submit a Request for Quotation (RFQ) for VLMP3102-GS08 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VLMP3102-GS08 reliable?
The price and inventory of VLMP3102-GS08 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VLMP3102-GS08 is usually 5 days.
3.What payment methods are accepted for VLMP3102-GS08?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VLMP3102-GS08 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VLMP3102-GS08?
VLMP3102-GS08 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VLMP3102-GS08 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VLMP3102-GS08?
For technical support, including VLMP3102-GS08 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VLMP3102-GS08 requirements.
6.How does Aetrix verify that VLMP3102-GS08 is sourced from the original manufacturer or authorized distributors?
All VLMP3102-GS08 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VLMP3102-GS08 meets industry standards.
7.What is the process for return or replacement of VLMP3102-GS08?
All VLMP3102-GS08 units undergo pre-shipment inspection (PSI). If there is an issue with VLMP3102-GS08, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VLMP3102-GS08 part is unused and in its original packaging.
Return procedure for VLMP3102-GS08:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VLMP3102-GS08 Tags
-
LTST-C281KRKT
Lite-On Inc.
-
150060GS75000
Würth Elektronik
-
150060VS75000
Würth Elektronik
-
150060AS75000
Würth Elektronik
-
150060YS75000
Würth Elektronik
-
150060SS75000
Würth Elektronik
-
150060BS75000
Würth Elektronik
-
151031VS06000
Würth Elektronik
-
151033RS03000
Würth Elektronik
-
150080BS75000
Würth Elektronik
-
150080GS75000
Würth Elektronik
-
150141GS73100
Würth Elektronik
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
