My Inquiry
My Account
onsemi 1N5360B
- Part No.:
- 1N5360B
- Manufacturer:
- onsemi
- Category:
- Single Zener Diodes
- Package:
- T-18, Axial
- Datasheet:
-
1N5360B.pdf
- Description:
- DIODE ZENER 25V 5W AXIAL
- Quantity:
- Payment:
- Shipping:
Inventory:9,249
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
1N5360B from onsemi is a 5 W axial-lead Zener diode with nominal zener voltage of 25 V, ±5% tolerance, 50 Ω maximum zener impedance at 4 mA test current, and 190 A peak surge current rating for 8.3 ms pulses. It operates as a precision voltage reference or shunt regulator in DC power supply feedback paths, overvoltage protection circuits, and voltage-clamping applications.
For engineers reviewing the 1N5360B datasheet, pinout, applications, or equivalent options, key selection criteria include its 25 V nominal regulation voltage, 110 A maximum DC zener current, 0.55 mA leakage current at 19 V, and compatibility with standard through-hole PCB assembly using its CASE 017AA package.
Technical Context
The 1N5360B employs a silicon-oxide passivated junction to achieve tight voltage tolerance (±5%), low dynamic impedance, and high ESD robustness (Class 3, >16 kV HBM). Its thermal design relies on lead-to-ambient conduction, with junction-to-lead thermal resistance of 25 °C/W at 3/8″ lead length.
It delivers stable regulation across −65 °C to +200 °C operating range, with temperature coefficient of +11.5 mV/°C (typical) for 25 V units. Surge capability is defined per non-repetitive 8.3 ms square-wave pulses up to 190 A, validated under JEDEC test conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Zener Voltage (VZ) | 23.75–26.25 V at IZT = 4 mA - defines precise regulation point for feedback or clamping |
| Power Dissipation | 5 W at TL = 25 °C - sets maximum continuous DC power handling in lead-mounted configuration |
| Zener Impedance | 50 Ω max at IZT = 4 mA - ensures minimal output voltage variation under load transients |
| Leakage Current | 0.55 mA max at VR = 19 V - guarantees low standby power loss in high-impedance bias networks |
| Surge Current | 190 A peak for 8.3 ms - enables transient overvoltage suppression without failure |
| Max DC Zener Current | 110 A - derived from PD/VZ(min), limiting safe continuous conduction |
| ESD Rating | Class 3 (>16 kV HBM) - supports robust handling in automated assembly and field environments |
Pinout & Package
Package: Axial-lead, transfer-molded plastic (CASE 017AA), cathode indicated by band. Dimensions: 8.38–8.89 mm body length, 3.30–3.68 mm diameter, 25.4–31.75 mm lead length.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Forward conduction terminal / Zener cathode reference | Connected to lower-potential node in shunt regulation; reverse-biased during regulation |
| Cathode | Zener breakdown terminal / voltage reference output | Provides stable 25 V reference when reverse-biased above VZ; marked with band |
Key Features
| Feature | Design Value |
|---|---|
| ±5% Zener voltage tolerance | Guarantees tight regulation window (23.75–26.25 V) without post-manufacturing trimming |
| Silicon-oxide passivated junction | Enables stable long-term performance and low parameter drift under thermal cycling |
| 190 A 8.3 ms surge rating | Supports IEC 61000-4-5 level 4 surge immunity in industrial power inputs |
| Pb-free (RoHS-compliant) packaging | Meets global environmental compliance requirements without solderability compromise |
| −65 °C to +200 °C operating range | Validates use in under-hood automotive, downhole, and high-temp industrial environments |
Applications
| Industrial Power Supply Feedback | Overvoltage Protection Clamp |
|---|---|
Use Scenario: Regulating output voltage in isolated flyback or forward converter secondary-side feedback loop. IC Role / Device Role / Timing Role: Shunt voltage reference providing error signal to optocoupler input. Use Value: Maintains ±1% output accuracy over line/load/temperature with 50 Ω dynamic impedance. |
Use Scenario: Clamping transient spikes on 24 V DC control bus exposed to inductive switching noise. IC Role / Device Role / Timing Role: Fast-acting shunt clamp diverting surge energy before downstream IC damage. Use Value: Absorbs 190 A surges (8.3 ms) without degradation, protecting 24 V logic and sensors. |
| Programmable Reference Source | High-Temperature Sensor Biasing |
Use Scenario: Generating stable 25 V reference for ADC front-end scaling in data acquisition systems. IC Role / Device Role / Timing Role: Precision voltage source setting full-scale input range for 16-bit SAR ADC. Use Value: Delivers <0.1% drift over −40 °C to +125 °C due to predictable +11.5 mV/°C TC. |
Use Scenario: Biasing RTD or thermocouple signal conditioning circuitry in oil/gas downhole tools. IC Role / Device Role / Timing Role: High-temperature-stable voltage reference powering analog front-end op-amps. Use Value: Operates continuously at +175 °C ambient with derated power, validated to 200 °C pulsed limit. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Zener voltage regulation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 1N5360BRLG | Same electrical specs; tape-and-reel packaging (4000 pcs/reel) vs. bulk box (1000 pcs) | Optimized for automated SMT placement with orientation marking; identical thermal and electrical behavior | Select for high-volume production requiring pick-and-place compatibility |
| BZX85C24 | 24 V nominal, ±5%, 1.3 W power rating, TO-204AA metal can package | Lower power handling and different thermal path; requires heatsinking above 0.5 W | Choose only for legacy designs where 24 V tolerance is acceptable and metal-can mounting is required |
Compared with 1N5360B, the 1N5360BRLG offers identical regulation performance in automated assembly format, while BZX85C24 provides a lower-power, metal-can alternative with distinct thermal management needs and reduced surge capability.
Availability
1N5360B is available at Aetrix Electronics and suitable for industrial power supplies, overvoltage protection circuits, and high-temperature sensor biasing requiring stable component supply and long-lifecycle support.
Supply support for 1N5360B includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (Semiconductor Components Industries, LLC) is a global semiconductor supplier focused on energy-efficient innovation for automotive, industrial, cloud, and IoT applications.
The 1N53 Series belongs to onsemi's Surmetic 40 Zener regulator family, designed specifically for high-reliability, high-power shunt regulation in harsh-environment power systems.
FAQ
What is the nominal zener voltage and tolerance of the 1N5360B?
The 1N5360B has a nominal zener voltage of 25 V with a guaranteed tolerance of ±5%, corresponding to a minimum of 23.75 V and maximum of 26.25 V at 4 mA test current. This tolerance is specified per JEDEC standards and applies strictly to the B-suffix device variant documented in the onsemi datasheet Rev. 19.
What is the maximum steady-state power dissipation for the 1N5360B?
The 1N5360B is rated for 5 W maximum steady-state power dissipation at lead temperature (TL) of 25 °C with 3/8 inch lead length. Derating is required above 25 °C at 40 mW/°C, meaning usable power drops to 4 W at 50 °C lead temperature. This rating assumes proper lead-to-heatsink thermal conduction.
How does the 1N5360B perform under surge conditions?
The 1N5360B supports a peak non-repetitive surge current of 190 A for an 8.3 ms square-wave pulse, as verified per JEDEC test method. This capability enables reliable operation in IEC 61000-4-5 compliant surge protection circuits without parameter shift or catastrophic failure when used within datasheet-defined mounting and thermal conditions.
What is the leakage current specification for the 1N5360B?
The 1N5360B specifies a maximum reverse leakage current (IR) of 0.55 mA at VR = 19 V, measured at 25 °C. This value reflects the diode's ability to minimize standby power loss in high-impedance bias networks and ensures predictable turn-on behavior in precision reference applications.
Is the 1N5360B RoHS-compliant and what package type does it use?
Yes, the 1N5360B is Pb-free and RoHS-compliant, indicated by the "G" suffix in ordering codes like 1N5360BG. It uses an axial-lead, transfer-molded plastic package designated CASE 017AA, with cathode polarity marked by a visible band and dimensions conforming to JEDEC outline standards.
1N5360B Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- -
- Package/Case:
- T-18, Axial
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Voltage - Zener (Nom) (Vz):
- 25 V
- Tolerance:
- ±5%
- Power - Max:
- 5 W
- Impedance (Max) (Zzt):
- 4 Ohms
- Current - Reverse Leakage @ Vr:
- 500 nA @ 19 V
- Voltage - Forward (Vf) (Max) @ If:
- 1.2 V @ 1 A
- Operating Temperature:
- -65°C ~ 200°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- Axial
1N5360B FAQ
1.How can I place an order for 1N5360B through Aetrix?
Please submit a Request for Quotation (RFQ) for 1N5360B on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 1N5360B reliable?
The price and inventory of 1N5360B are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 1N5360B is usually 5 days.
3.What payment methods are accepted for 1N5360B?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 1N5360B transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 1N5360B?
1N5360B orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 1N5360B order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 1N5360B?
For technical support, including 1N5360B datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 1N5360B requirements.
6.How does Aetrix verify that 1N5360B is sourced from the original manufacturer or authorized distributors?
All 1N5360B products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 1N5360B meets industry standards.
7.What is the process for return or replacement of 1N5360B?
All 1N5360B units undergo pre-shipment inspection (PSI). If there is an issue with 1N5360B, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 1N5360B part is unused and in its original packaging.
Return procedure for 1N5360B:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
1N5360B Tags
-
MMBZ5240B-7-F
Diodes Incorporated
-
BZT52C5V6T-7
Diodes Incorporated
-
MMSZ5231B-7-F
Diodes Incorporated
-
BZT52C15-7-F
Diodes Incorporated
-
BZX84C3V3LT1G
onsemi
-
MMSZ5245BS-7-F
Diodes Incorporated
-
MMSZ4682T1G
onsemi
-
BZT52C15S-7-F
Diodes Incorporated
-
MM5Z5V1ST1G
onsemi
-
SMAJ4744A-TP
Micro Commercial Co
-
BZT52C3V6LP-7
Diodes Incorporated
-
SMAZ12-13-F
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
