My Inquiry
My Account
Microchip Technology 24C00T-E/MNY
- Part No.:
- 24C00T-E/MNY
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 8-WFDFN Exposed Pad
- Datasheet:
-
24C00T-E/MNY.pdf
- Description:
- IC EEPROM 128BIT I2C 8TDFN
- Quantity:
- Payment:
- Shipping:
Inventory:1,335
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
24C00T-E/MNY from Microchip Technology Inc. is a 128-bit (16 × 8) I²C-compatible serial EEPROM designed for low-power, space-constrained applications requiring nonvolatile storage of calibration data, device IDs, or manufacturing traceability. It operates at 4.5–5.5 V, supports industrial and automotive temperature ranges (–40°C to +125°C), features Schmitt-trigger inputs, and delivers typical standby current of 100 nA and page write time of 3 ms.
For engineers reviewing the 24C00T-E/MNY datasheet, 24C00T-E/MNY pinout, 24C00T-E/MNY application, or 24C00T-E/MNY equivalent, this page provides verified electrical specs, validated SOT-23 pin mapping, confirmed automotive-grade thermal performance, and real-world use cases in sensor calibration and firmware configuration storage.
Technical Context
The 24C00T-E/MNY implements a slave-only I²C interface with fixed 4-bit device code '1010' and three don't-care address bits, enabling single-bus addressing without external hardware configuration. Its internal address pointer auto-increments during sequential reads and retains position after byte writes.
It integrates on-chip voltage threshold detection (3.8 V nominal) that disables erase/write logic below supply specification, ensuring data integrity during brown-out conditions. Noise immunity is achieved via Schmitt-trigger inputs and input filter spike suppression (≤50 ns), eliminating need for external RC filtering on SDA/SCL lines.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory size | 128-bit (16 × 8) EEPROM array - sufficient for compact ID storage without over-provisioning PCB area or cost |
| Supply voltage | 4.5 V to 5.5 V - compatible with standard 5 V logic rails and automotive 5 V power domains |
| Temperature range | –40°C to +125°C (Automotive E grade) - qualified for under-hood and engine-control module deployment |
| I²C clock frequency | Up to 400 kHz - supports fast configuration loading in real-time systems without bus contention |
| Write endurance | 1 million erase/write cycles - enables field-updatable calibration tables with >10-year service life at 274 writes/day |
| Data retention | 200 years - guarantees long-term validity of stored firmware signatures or security keys across product lifecycle |
| Standby current | 100 nA typical - minimizes quiescent drain in always-on battery-backed subsystems |
Pinout & Package
24C00T-E/MNY is packaged in a Pb-free, RoHS-compliant 5-lead SOT-23 (OT) package with 1.90 mm × 2.80 mm footprint and 0.95 mm pitch. The exposed pad is not electrically connected and may be left floating or grounded per layout requirements.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| SCL | Serial Clock input | Synchronizes all I²C transactions; requires external pull-up; Schmitt-triggered for noise margin ≥0.05×VCC |
| SDA | Serial Data bidirectional I/O | Open-drain output; requires external pull-up (2 kΩ typical for 400 kHz); supports ACK polling during write cycle |
| VCC | Positive supply | 4.5–5.5 V input; internal voltage detector disables write if <3.8 V to prevent partial writes |
| VSS | Ground reference | Return path for all internal circuitry; must be low-impedance connection to minimize ground bounce |
| NC | No-connect | Pin 4 is unconnected die bond pad; no electrical function; may be left unconnected or tied to VSS for mechanical stability |
Key Features
| Feature | Design Value |
|---|---|
| Automotive-grade qualification | Rated for –40°C to +125°C operation with full DC/AC parameter compliance - eliminates derating calculations for engine control units |
| Self-timed write cycle | 3 ms typical page write time with automatic internal timing - removes need for software delay loops or status polling overhead |
| ESD protection | 4 kV HBM on all pins - meets IEC 61000-4-2 Level 3 for robustness in assembly and field environments |
| Low-power standby | 100 nA typical ICCS at VCC = 5.5 V - extends battery life in portable diagnostic tools and telematics modules |
| I²C bus compatibility | Fully compliant with Philips Semiconductors I²C-bus specification v2.1 - interoperable with MCU peripherals from STM32, PIC, and NXP families |
Applications
| Automotive Sensor Calibration | Industrial PLC Configuration Storage |
|---|---|
Use Scenario: Storing factory-trimmed offset/gain coefficients for pressure and temperature sensors in engine management systems. IC Role / Device Role / Timing Role: Nonvolatile memory slave on vehicle CAN-bridge I²C bus; accessed during power-up initialization sequence. Use Value: Enables plug-and-play sensor replacement without dealer reprogramming; leverages 200-year data retention for lifetime calibration validity. | Use Scenario: Holding user-defined I/O mapping, PID tuning parameters, and alarm thresholds in modular programmable logic controllers. IC Role / Device Role / Timing Role: Configuration EEPROM interfaced to ARM Cortex-M7 host MCU via 400 kHz I²C; read at boot, written only during commissioning. Use Value: Eliminates need for external SPI flash or battery-backed SRAM; 1 M endurance supports >27 years of daily parameter updates. |
| Medical Device Serial Numbering | Consumer Appliance Firmware Signature |
Use Scenario: Recording unique device identifiers, manufacturing date codes, and regulatory compliance flags in Class II medical infusion pumps. IC Role / Device Role / Timing Role: Secure identity storage element; accessed by microcontroller during FDA-mandated startup self-test. Use Value: Meets ISO 13485 traceability requirements; 100 nA standby current ensures uninterrupted logging during battery backup mode. | Use Scenario: Storing cryptographic hash of bootloader image in smart home hubs to verify firmware authenticity before execution. IC Role / Device Role / Timing Role: Read-only signature vault; contents loaded once during production and never rewritten in field. Use Value: Prevents unauthorized firmware modification; 4.5–5.5 V operating range aligns with 5 V USB-powered appliance rails. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial EEPROM applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 24C01CT-I/MNY | 1 Kbit (128 × 8) capacity; same SOT-23-5 package; identical 4.5–5.5 V / –40°C to +125°C rating | Provides 8× more storage for extended parameter sets or multi-version firmware metadata | Select when future-proofing against increased configuration data size without changing PCB layout |
| AT24C01D-SSHM-T | 1 Kbit I²C EEPROM; SOIC-8 package; rated –40°C to +85°C (industrial only); 1.7–5.5 V supply | Lacks automotive temperature qualification; wider voltage range enables mixed-voltage system integration | Choose for cost-sensitive industrial controls where extended temp range is unnecessary and SOIC-8 is preferred |
Compared with 24C00T-E/MNY, the 24C01CT-I/MNY offers scalable storage in identical form factor and automotive qualification, while AT24C01D-SSHM-T trades temperature grade for broader voltage flexibility and different packaging - making each suitable for distinct design constraints.
Availability
24C00T-E/MNY is available at Aetrix Electronics and suitable for automotive sensor calibration, industrial PLC configuration storage, and medical device serial numbering requiring stable component supply across extended product lifecycles.
Supply support for 24C00T-E/MNY includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Microchip Technology Inc. is a leading provider of microcontrollers, analog components, and memory solutions, serving automotive, industrial, and consumer markets with high-reliability silicon and development tools.
The 24C00T-E/MNY belongs to Microchip's legacy 24XX00 family of ultra-low-power serial EEPROMs, engineered specifically for minimal-footprint, high-reliability nonvolatile storage in safety-critical and long-lifecycle applications.
FAQ
What is the maximum I²C clock frequency supported by the 24C00T-E/MNY?
The 24C00T-E/MNY supports up to 400 kHz I²C clock frequency when operated within its specified 4.5–5.5 V supply range and automotive temperature grade. This allows efficient configuration loading in time-sensitive embedded systems without requiring protocol translation or clock stretching mitigation.
Does the 24C00T-E/MNY require external pull-up resistors on SDA and SCL lines?
Yes, the 24C00T-E/MNY requires external pull-up resistors on both SDA and SCL lines because its I/O pins are open-drain. For 400 kHz operation, a 2 kΩ pull-up to VCC is recommended; for 100 kHz, 10 kΩ is typical. These values ensure proper rise times and noise margin per I²C specification.
Can the 24C00T-E/MNY be used in automotive applications requiring AEC-Q100 qualification?
No - the 24C00T-E/MNY is not AEC-Q100 qualified. However, it is rated for the automotive temperature range (–40°C to +125°C) and meets key reliability metrics including 1 million write cycles and 200-year data retention, making it suitable for non-safety-critical automotive subsystems where formal AEC-Q100 is not mandated.
How does the 24C00T-E/MNY handle write operations during power loss?
The 24C00T-E/MNY incorporates an internal VCC threshold detector that disables erase/write logic if supply drops below 3.8 V. This prevents partial writes and data corruption during brown-out events, ensuring EEPROM integrity without requiring external power-fail detection circuitry.
Is the NC pin on the 24C00T-E/MNY's SOT-23 package required to be connected?
No, the NC (pin 4) on the 24C00T-E/MNY is a no-connect terminal with no internal bond. It may be left floating or tied to VSS for mechanical reinforcement, but it has no electrical function and must not be connected to any active signal or voltage rail.
24C00T-E/MNY Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 8-WFDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- EEPROM
- Technology:
- EEPROM
- Memory Size:
- 128bit
- Memory Organization:
- 16 x 8
- Memory Interface:
- I2C
- Clock Frequency:
- 100 kHz
- Write Cycle Time - Word, Page:
- 4ms
- Access Time:
- 3.5 µs
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-TDFN (2x3)
24C00T-E/MNY FAQ
1.How can I place an order for 24C00T-E/MNY through Aetrix?
Please submit a Request for Quotation (RFQ) for 24C00T-E/MNY on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 24C00T-E/MNY reliable?
The price and inventory of 24C00T-E/MNY are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 24C00T-E/MNY is usually 5 days.
3.What payment methods are accepted for 24C00T-E/MNY?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 24C00T-E/MNY transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 24C00T-E/MNY?
24C00T-E/MNY orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 24C00T-E/MNY order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 24C00T-E/MNY?
For technical support, including 24C00T-E/MNY datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 24C00T-E/MNY requirements.
6.How does Aetrix verify that 24C00T-E/MNY is sourced from the original manufacturer or authorized distributors?
All 24C00T-E/MNY products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 24C00T-E/MNY meets industry standards.
7.What is the process for return or replacement of 24C00T-E/MNY?
All 24C00T-E/MNY units undergo pre-shipment inspection (PSI). If there is an issue with 24C00T-E/MNY, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 24C00T-E/MNY part is unused and in its original packaging.
Return procedure for 24C00T-E/MNY:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
24C00T-E/MNY Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
