My Inquiry
My Account
NXP Semiconductors 2PC1815GR,116
,TO-226_straightlead.jpg)
- Part No.:
- 2PC1815GR,116
- Manufacturer:
- NXP Semiconductors
- Category:
- Single Bipolar Transistors
- Package:
- TO-226-3, TO-92-3 (TO-226AA) Formed Leads
- Datasheet:
-
2PC1815GR,116.pdf
- Description:
- TRANS NPN 50V 0.15A TO-92-3
- Quantity:
- Payment:
- Shipping:
Inventory:2,122
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
2PC1815GR,116 from Nexperia (formerly Philips Semiconductors) is an NPN general-purpose bipolar junction transistor in TO-92 (SOT54) package, rated for 50 V VCEO, 150 mA IC, and DC current gain (hFE) of 200–400 at IC = 150 mA, used in audio amplifier driver stages and low-power switching circuits.
For engineers reviewing the 2PC1815GR,116 datasheet, 2PC1815GR,116 pinout, 2PC1815GR,116 application, or 2PC1815GR,116 equivalent, key selection factors include its verified hFE binning (GR grade), TO-92 thermal resistance (250 K/W), saturation voltage (≤300 mV at IC = 100 mA), noise figure (≤10 dB), and compatibility with through-hole PCB assembly.
Technical Context
This discrete NPN transistor operates in linear amplification and saturated switching modes. Its hFE range of 200–400 at VCE = 6 V and IC = 150 mA supports stable biasing in Class-A audio drivers, while VCEsat ≤ 300 mV and VBEsat ≤ 1.1 V ensure low conduction loss in switching applications.
Designed for ambient temperatures from −65 °C to +150 °C and junction temperatures up to 150 °C, it features 2.5 pF typical collector capacitance and 80 MHz transition frequency (fT), enabling reliable operation in audio-frequency signal paths and low-speed digital interface buffering.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - maximum safe collector-emitter voltage under open-base condition; defines upper rail limit in low-voltage amplifier or switch designs. |
| IC (DC) | 150 mA - continuous collector current rating; sets load-driving capability in preamp stages or relay drivers. |
| hFE | 200–400 - DC current gain at IC = 150 mA; enables predictable base drive calculation for stable bias networks. |
| VCEsat | ≤300 mV - collector-emitter saturation voltage at IC = 100 mA / IB = 10 mA; ensures minimal power loss and heat generation in on-state switching. |
| fT | 80 MHz - transition frequency; supports faithful amplification up to mid-audio frequencies with margin for stability. |
| Rth(j-a) | 250 K/W - junction-to-ambient thermal resistance on FR4 PCB; informs heatsinking requirements for sustained 500 mW dissipation. |
Pinout & Package
2PC1815GR,116 is housed in a plastic single-ended leaded (through-hole) TO-92 package (SOT54, SC-43A), with 3 leads and standard 2.54 mm lead pitch. The package measures 4.8 mm × 4.2 mm × 14.5 mm (L × W × H) and is optimized for manual or wave-solder assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base | Current-controlled input node; requires series resistor to limit IB and set operating point per hFE and IC. |
| 2 | Collector | High-side output terminal; connects to load or supply rail; carries full IC and dissipates most power in saturation. |
| 3 | Emitter | Common reference node; typically grounded in common-emitter configuration; provides return path for IC and IB. |
Key Features
| Feature | Design Value |
|---|---|
| GR-grade hFE binning | Guaranteed 200–400 hFE at IC = 150 mA, enabling consistent gain matching across production batches in amplifier designs. |
| Low VCEsat | ≤300 mV ensures <15 mW conduction loss at 100 mA, reducing thermal stress and improving efficiency in switching applications. |
| TO-92 mechanical standardization | Compatible with legacy through-hole tooling, socketing, and repair workflows; widely supported by pick-and-place and rework stations. |
| 80 MHz fT | Provides >10× margin over 20 kHz audio bandwidth, supporting clean small-signal amplification without high-frequency roll-off. |
Applications
| Audio Amplifier Driver Stage | Low-Voltage Relay Driver |
|---|---|
Use Scenario: Driving the base of a higher-power output transistor in a Class-A headphone amplifier. IC Role / Device Role / Timing Role: Small-signal NPN voltage/current amplifier providing gain and impedance transformation between op-amp output and power stage input. Use Value: GR-bin hFE ensures predictable gain and bias stability; low VCEsat minimizes distortion at quiescent points near cutoff. | Use Scenario: Switching a 12 V, 80 mA coil in industrial control I/O modules. IC Role / Device Role / Timing Role: Saturated-switch BJT controlling relay coil current via microcontroller GPIO. Use Value: Verified 150 mA IC rating and ≤300 mV VCEsat guarantee reliable turn-on with minimal self-heating under continuous duty. |
| Signal Level Shifter | LED Current Limiter |
Use Scenario: Translating 3.3 V logic signals to 5 V domains in mixed-supply sensor interfaces. IC Role / Device Role / Timing Role: Common-emitter level translator with fixed bias network and pull-up resistor. Use Value: 50 V VCEO headroom prevents breakdown during transient overshoot; 80 MHz fT preserves edge integrity up to 1 MHz. | Use Scenario: Constant-current sink for indicator LEDs in automotive dashboard clusters. IC Role / Device Role / Timing Role: Emitter-follower configured as adjustable current source using base voltage reference. Use Value: Tight hFE binning (200–400) enables precise current setting with low-tolerance resistors; TO-92 allows easy hand-soldering in serviceable assemblies. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar NPN general-purpose transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC547B | Lower hFE (200–450 at IC = 2 mA); same VCEO (45 V), but lower IC rating (100 mA). | Not suitable for 150 mA continuous loads; better for low-current signal amplification only. | Select BC547B only when load current stays below 100 mA and gain at low IC is prioritized. |
| 2N3904 | Higher VCEO (60 V); identical IC (200 mA peak), but hFE un-binned (100–300 at IC = 10 mA). | Broader hFE spread increases bias sensitivity; preferred where voltage margin > current gain consistency. | Choose 2N3904 when system requires >50 V headroom and can accommodate gain variation across temperature and unit-to-unit. |
Compared with BC547B and 2N3904, the 2PC1815GR,116 offers guaranteed mid-range hFE at full-rated current, making it preferable for production-critical 150 mA driver stages where gain predictability and saturation performance are design-critical.
Availability
2PC1815GR,116 is available at Aetrix Electronics and suitable for audio amplifier driver stages, low-voltage relay drivers, and LED current-limiting circuits requiring stable component supply and long-term obsolescence management.
Supply support for 2PC1815GR,116 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia, formerly Philips Semiconductors, is a global leader in high-volume, high-reliability discrete and logic components, headquartered in Nijmegen, Netherlands.
The 2PC1815GR,116 belongs to Nexperia's legacy general-purpose transistor family, designed specifically for cost-sensitive, through-hole-based consumer, industrial, and audio applications requiring proven reliability and standardized packaging.
FAQ
What is the hFE range for 2PC1815GR,116 and how is it tested?
The 2PC1815GR,116 has a guaranteed DC current gain (hFE) range of 200–400, measured at VCE = 6 V and IC = 150 mA per the official Nexperia datasheet. This GR-grade binning is verified during final test and ensures consistent biasing behavior across units in production amplifier and switching circuits using the 2PC1815GR,116.
Is 2PC1815GR,116 compatible with standard TO-92 sockets and rework tools?
Yes, the 2PC1815GR,116 uses the industry-standard TO-92 outline (SOT54/SC-43A) with 2.54 mm lead pitch and defined mechanical dimensions (L = 14.5 mm, D = 4.8 mm). It fits all generic TO-92 sockets and is fully compatible with standard desoldering irons, vacuum pickup nozzles, and wave-solder pallets used for through-hole assembly of the 2PC1815GR,116.
What is the maximum power dissipation of 2PC1815GR,116 and under what conditions?
The 2PC1815GR,116 has a total power dissipation (Ptot) rating of 500 mW at Tamb ≤ 25 °C when mounted on an FR4 PCB, as specified in the Absolute Maximum Ratings table. Derating is required above 25 °C ambient-approximately 4 mW/°C-based on its 250 K/W junction-to-ambient thermal resistance. This applies directly to thermal design of circuits using the 2PC1815GR,116.
Does 2PC1815GR,116 have a PNP complement, and what is its part number?
Yes, the PNP complement to the 2PC1815GR,116 is the 2PA1015, which shares the same TO-92 package, voltage ratings (−50 V VECO), and current capability (−150 mA IC). Both devices are designed for complementary pair use in push-pull amplifier stages and are documented as direct functional counterparts in the original Philips datasheet for the 2PC1815GR,116.
Can 2PC1815GR,116 be used in audio-frequency amplification up to 20 kHz?
Yes, the 2PC1815GR,116 has an 80 MHz transition frequency (fT) and low noise figure (≤10 dB at 1 kHz), making it well-suited for audio-frequency amplification up to 20 kHz. Its gain-bandwidth product and low Cc (2.5–3.5 pF) ensure flat response and minimal phase shift in preamplifier and driver stages using the 2PC1815GR,116.
2PC1815GR,116 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- -
- Package/Case:
- TO-226-3, TO-92-3 (TO-226AA) Formed Leads
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Transistor Type:
- NPN
- Current - Collector (Ic) (Max):
- 150 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Vce Saturation (Max) @ Ib, Ic:
- 300mV @ 10mA, 100mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 200 @ 2mA, 6V
- Power - Max:
- 500 mW
- Frequency - Transition:
- 80MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-92-3
2PC1815GR,116 FAQ
1.How can I place an order for 2PC1815GR,116 through Aetrix?
Please submit a Request for Quotation (RFQ) for 2PC1815GR,116 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 2PC1815GR,116 reliable?
The price and inventory of 2PC1815GR,116 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 2PC1815GR,116 is usually 5 days.
3.What payment methods are accepted for 2PC1815GR,116?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 2PC1815GR,116 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 2PC1815GR,116?
2PC1815GR,116 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 2PC1815GR,116 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 2PC1815GR,116?
For technical support, including 2PC1815GR,116 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 2PC1815GR,116 requirements.
6.How does Aetrix verify that 2PC1815GR,116 is sourced from the original manufacturer or authorized distributors?
All 2PC1815GR,116 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 2PC1815GR,116 meets industry standards.
7.What is the process for return or replacement of 2PC1815GR,116?
All 2PC1815GR,116 units undergo pre-shipment inspection (PSI). If there is an issue with 2PC1815GR,116, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 2PC1815GR,116 part is unused and in its original packaging.
Return procedure for 2PC1815GR,116:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
2PC1815GR,116 Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
