My Inquiry
My Account
NXP Semiconductors 2PC4617R,135
- Part No.:
- 2PC4617R,135
- Manufacturer:
- NXP Semiconductors
- Category:
- Single Bipolar Transistors
- Package:
- SC-75, SOT-416
- Datasheet:
-
2PC4617R,135.pdf
- Description:
- TRANS NPN 50V 0.15A SC-75
- Quantity:
- Payment:
- Shipping:
Inventory:9,852
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
2PC4617R,135 from Nexperia is an NPN general-purpose bipolar junction transistor in SOT416 (SC-75) package, rated for 50 V VCEO, 150 mA IC, and 150 mW Ptot, with DC current gain (hFE) of 180–390 at IC = 1 mA. It serves as a low-voltage, low-current switch or amplifier in compact consumer and EDP signal paths.
For engineers reviewing the 2PC4617R,135 datasheet, 2PC4617R,135 pinout, 2PC4617R,135 application, or 2PC4617R,135 equivalent, key selection criteria include its SC-75 footprint compatibility, guaranteed hFE range, VCEO/IC derating behavior, and thermal resistance (Rth(j-a) = 833 K/W) on FR4 PCBs.
Technical Context
This discrete NPN transistor operates in linear or saturation mode with verified cutoff leakage (ICBO ≤ 100 nA at 30 V, 25 °C) and low VCE(sat) (≤ 200 mV at IC = 50 mA, IB = 5 mA). Its fT ≥ 100 MHz supports audio and low-speed digital switching up to ~10 MHz.
Thermal performance is defined for standard FR4 board mounting (single-sided copper, tin-plated), with maximum junction temperature of 150 °C and storage range from −65 °C to +150 °C. The device lacks integrated protection features and requires external base current limiting.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - Maximum collector-emitter voltage before breakdown under open-base condition; sets upper rail limit for switching applications. |
| IC (DC) | 150 mA - Continuous collector current rating; defines max steady-state load drive capability at Tamb ≤ 25 °C. |
| hFE | 180–390 - DC current gain at IC = 1 mA, VCE = 6 V; determines required base drive for reliable saturation. |
| VCE(sat) | ≤ 200 mV - Collector-emitter saturation voltage at IC = 50 mA, IB = 5 mA; directly impacts power loss and logic-level compatibility. |
| Rth(j-a) | 833 K/W - Junction-to-ambient thermal resistance on standard FR4; used to calculate ΔTj rise under given Ptot. |
| fT | ≥ 100 MHz - Transition frequency at IC = 2 mA, VCE = 12 V; indicates usable bandwidth for small-signal amplification. |
Pinout & Package
SOT416 (SC-75) plastic surface-mounted package: ultra-small outline, 3-pin, single-ended lead frame, 1.75 mm × 0.95 mm body size, 0.45 mm pitch, 0.7 mm height.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base | Control terminal; requires current-limited drive to bias transistor into active or saturated region. |
| 2 | Emitter | Current return path; typically tied to ground or low-side reference in common-emitter configurations. |
| 3 | Collector | Output terminal; connects to load and supply rail; carries full switched current in saturation mode. |
Key Features
| Feature | Design Value |
|---|---|
| Guaranteed hFE range | 180–390 at IC = 1 mA ensures predictable base drive sizing across production lots. |
| Low VCE(sat) | ≤ 200 mV enables efficient switching in battery-powered or low-voltage logic interfaces. |
| Small-footprint SOT416 | 0.95 mm × 1.75 mm body allows high-density placement in space-constrained consumer PCBs. |
| High fT | ≥ 100 MHz supports stable operation in audio preamps and clock buffer stages up to 10 MHz. |
Applications
| Audio Signal Switching | EDP Peripheral Control |
|---|---|
Use Scenario: Selecting between two analog audio sources in portable media players using low-voltage logic control. IC Role / Device Role / Timing Role: NPN switch enabling/disabling signal path via base-driven saturation. Use Value: Low VCE(sat) minimizes insertion loss (<200 mV drop), preserving SNR in line-level audio routing. |
Use Scenario: Enabling/disabling USB interface LEDs or status indicators on notebook motherboard daughterboards. IC Role / Device Role / Timing Role: General-purpose low-current switch controlled by 3.3 V GPIO. Use Value: Guaranteed hFE ≥ 180 ensures full LED current drive with minimal base resistor tolerance sensitivity. |
| Consumer Remote IR Driver | Low-Power Sensor Interface |
Use Scenario: Driving infrared LED pulses in TV remote controls powered by coin-cell batteries. IC Role / Device Role / Timing Role: Fast-switching NPN transistor modulating IR carrier at 38 kHz. Use Value: fT ≥ 100 MHz supports clean square-wave edge integrity without slew-induced distortion. |
Use Scenario: Level-shifting and buffering analog output from MEMS accelerometers to ADC input rails. IC Role / Device Role / Timing Role: Emitter-follower configured for impedance matching and DC-coupled gain stability. Use Value: Low ICBO (≤100 nA) prevents offset drift in high-impedance sensor bias networks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar NPN general-purpose transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC846B,215 | Same SOT23 package (not SC-75); hFE = 200–450; VCEO = 65 V; Ptot = 250 mW. | Higher voltage/power rating; larger footprint; not drop-in for SC-75 layout. | Select when board space permits SOT23 and higher VCEO margin is needed. |
| 2SC4617R,135 | Identical marking code and electrical specs; same Nexperia product family; identical SC-75 package. | No functional difference; alternate part number reflecting legacy naming convention. | Direct form-fit-function replacement; verify sourcing channel availability. |
Compared with BC846B,215, the 2PC4617R,135 offers smaller footprint and lower thermal resistance per unit area but reduced voltage headroom; versus 2SC4617R,135, it is functionally identical with no design impact.
Availability
2PC4617R,135 is available at Aetrix Electronics and suitable for audio signal switching, EDP peripheral control, consumer remote IR driver, and low-power sensor interface applications requiring stable component supply and consistent parametric binning.
Supply support for 2PC4617R,135 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global leader in discrete, logic, and PowerMOS semiconductors, spun off from NXP in 2017, focused on automotive, industrial, computing, consumer, and wearable markets.
The 2PC4617R,135 belongs to Nexperia's general-purpose bipolar transistor portfolio, designed for cost-sensitive, space-constrained switching and amplification in high-volume consumer electronics.
FAQ
What is the maximum operating temperature for the 2PC4617R,135?
The 2PC4617R,135 has a maximum junction temperature (Tj) of 150 °C and a storage temperature range of −65 °C to +150 °C. Operation above 150 °C risks permanent degradation. Derating is required above 25 °C ambient due to Rth(j-a) = 833 K/W; for example, at 70 °C ambient, max allowable Ptot drops to ~90 mW.
Does the 2PC4617R,135 have built-in ESD protection?
No, the 2PC4617R,135 does not integrate ESD protection diodes. It complies with standard JEDEC JESD22-A114 (HBM) only up to ±2 kV, typical for bare bipolar transistors. System-level ESD protection must be implemented externally if used in handheld or exposed I/O applications.
What is the marking code for the 2PC4617R,135 on the package?
The 2PC4617R,135 is marked with "ZR" on the top surface of its SOT416 (SC-75) package. This 2-character laser marking distinguishes it from the Q (ZQ) and S (ZS) variants within the same 2PC4617 family, corresponding to different hFE bins.
Can the 2PC4617R,135 replace the 2PA1774 in a circuit?
No - the 2PA1774 is the PNP complement to the 2PC4617 series and is not interchangeable. Swapping 2PC4617R,135 (NPN) for 2PA1774 (PNP) would reverse current flow direction and polarity requirements, causing circuit failure unless topology is redesigned.
Is the 2PC4617R,135 suitable for linear amplification applications?
Yes, the 2PC4617R,135 supports linear operation with verified fT ≥ 100 MHz and low noise characteristics. However, its hFE variation (180–390) and lack of specified noise figure require emitter degeneration and DC feedback for stable gain; best suited for non-critical audio preamp or signal routing stages.
2PC4617R,135 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- -
- Package/Case:
- SC-75, SOT-416
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Transistor Type:
- NPN
- Current - Collector (Ic) (Max):
- 150 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Vce Saturation (Max) @ Ib, Ic:
- 200mV @ 5mA, 50mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 180 @ 1mA, 6V
- Power - Max:
- 150 mW
- Frequency - Transition:
- 100MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-75
2PC4617R,135 FAQ
1.How can I place an order for 2PC4617R,135 through Aetrix?
Please submit a Request for Quotation (RFQ) for 2PC4617R,135 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 2PC4617R,135 reliable?
The price and inventory of 2PC4617R,135 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 2PC4617R,135 is usually 5 days.
3.What payment methods are accepted for 2PC4617R,135?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 2PC4617R,135 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 2PC4617R,135?
2PC4617R,135 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 2PC4617R,135 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 2PC4617R,135?
For technical support, including 2PC4617R,135 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 2PC4617R,135 requirements.
6.How does Aetrix verify that 2PC4617R,135 is sourced from the original manufacturer or authorized distributors?
All 2PC4617R,135 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 2PC4617R,135 meets industry standards.
7.What is the process for return or replacement of 2PC4617R,135?
All 2PC4617R,135 units undergo pre-shipment inspection (PSI). If there is an issue with 2PC4617R,135, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 2PC4617R,135 part is unused and in its original packaging.
Return procedure for 2PC4617R,135:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
2PC4617R,135 Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
