My Inquiry
My Account
onsemi 2SC5706-TL-H
- Part No.:
- 2SC5706-TL-H
- Manufacturer:
- onsemi
- Category:
- Single Bipolar Transistors
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
2SC5706-TL-H.pdf
- Description:
- TRANS NPN 50V 5A TP-FA
- Quantity:
- Payment:
- Shipping:
Inventory:1,644
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
2SC5706-TL-H from onsemi is an NPN bipolar junction transistor (BJT) designed for high-current switching in power control circuits. It delivers 5 A continuous collector current, 50 V VCEO, low 90–135 mV VCE(sat) at 1–2 A, and 400 MHz fT, making it suitable for DC/DC converters and motor drivers.
For engineers reviewing the 2SC5706-TL-H datasheet, pinout, applications, or equivalent options, key selection criteria include verified VCE(sat) performance at 1–2 A, TP-FA package thermal capability, Pb-free & halogen-free compliance, and confirmed SC-63 (TO-252) footprint compatibility.
Technical Context
This device uses FBET and MBIT processes to achieve high-speed switching with low saturation voltage and large current handling. Its 15 W power dissipation at TC = 25°C and 300 ns storage time support robust operation in pulse-driven loads like relay and lamp drivers.
The 2SC5706-TL-H is electrically identical to 2SC5706-TL-E except for halogen-free material content; both share the same TP-FA package, pinout, and full electrical specifications including hFE = 200–560 at IC = 500 mA and Cob = 15 pF at VCB = 10 V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - Maximum safe collector-emitter voltage under open-base conditions; defines breakdown margin in switching applications. |
| IC (cont) | 5 A - Continuous collector current rating; supports high-power load switching without derating at TC ≤ 25°C. |
| VCE(sat) @ 1A/50mA | 90–135 mV - Low saturation voltage ensures <135 mW conduction loss at 1 A, critical for efficiency in DC/DC stages. |
| fT | 400 MHz - Gain-bandwidth product enables reliable operation up to ~100 MHz switching frequencies with adequate gain margin. |
| hFE | 200–560 @ VCE=2V, IC=500mA - Wide DC current gain range allows flexible base drive design across operating points. |
| PC @ TC=25°C | 15 W - Case-referenced power dissipation capacity; requires appropriate PCB copper area or heatsinking for sustained loads. |
| Cob | 15 pF @ VCB=10V - Output capacitance impacts turn-off speed and EMI in hard-switched topologies. |
Pinout & Package
2SC5706-TL-H is housed in a TP-FA package - JEITA/JEDEC-recognized as SC-63 and TO-252 - featuring surface-mount construction with exposed drain pad for thermal enhancement. The package measures 7.0 × 5.0 × 2.3 mm (typ), weighs 0.282 g, and uses Pb-free & halogen-free materials.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base | Control terminal; requires ~100 mA drive for full saturation at 2 A collector current. |
| 2 | Collector | Main current input node; electrically tied to exposed thermal pad for low-impedance heat path. |
| 3 | Emitter | Current return path; connected to ground or low-side reference in common-emitter configurations. |
| 4 | Collector | Second collector terminal - paralleled with Pin 2 to reduce bond wire inductance and improve current sharing. |
Key Features
| Feature | Design Value |
|---|---|
| Low VCE(sat) | 90 mV typ at IC = 1 A / IB = 50 mA - reduces conduction losses by >40% vs. standard BJTs in 12 V motor drive stages. |
| High-speed switching | ton = 35 ns, tf = 20 ns - enables clean transitions in 500 kHz–1 MHz PWM circuits with minimal overlap loss. |
| Large current capacity | IC = 5 A continuous, ICP = 7.5 A pulse - supports peak-loaded applications like solenoid actuation without thermal runaway. |
| High power dissipation | 15 W at TC = 25°C - accommodates high-duty-cycle operation when mounted on ≥100 mm² 2-oz copper with thermal vias. |
| Pb-free & halogen-free | Complies with J-STD-609 Class 3 moisture sensitivity and RoHS/REACH requirements - qualified for automotive and industrial assembly. |
Applications
| DC/DC Converter Switching Stage | Lamp Driver Circuit |
|---|---|
|
Use Scenario: High-efficiency buck converter in industrial power supplies delivering 5–24 V at up to 3 A output. IC Role / Device Role / Timing Role: Main NPN switch controlling energy transfer from input to output inductor; driven by PWM controller with 500 ns–1 µs dead time. Use Value: 90 mV VCE(sat) limits conduction loss to <270 mW at 3 A, improving full-load efficiency by ≥1.2% over legacy 200 mV-sat devices. |
Use Scenario: 12 V incandescent lamp dimming and on/off control in building automation panels. IC Role / Device Role / Timing Role: Low-side switch interfacing microcontroller GPIO to lamp load; operated in saturated switching mode. Use Value: 5 A rating and 300 ns storage time allow reliable 100 ms flash pulses without thermal stress or delayed turn-off artifacts. |
| Relay Driver Interface | Brushed DC Motor H-Bridge Leg |
|
Use Scenario: Driving 24 V/500 mA coil relays in PLC I/O modules requiring fast, bounce-free actuation. IC Role / Device Role / Timing Role: Single-transistor relay driver with flyback diode; switched at ≤10 Hz with 100% duty cycle capability. Use Value: 15 W PC rating and low VBE(sat) of –0.89 V ensure stable coil energization even at elevated ambient temperatures up to 75°C. |
Use Scenario: Low-side switch in half-bridge configuration for 12 V brushed DC motors drawing up to 4 A peak current. IC Role / Device Role / Timing Role: Power stage transistor controlled by gate driver IC; handles PWM frequencies up to 20 kHz. Use Value: 400 MHz fT and 20 ns fall time minimize switching losses during commutation, reducing MOSFET replacement cost in cost-sensitive designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar NPN high-current switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 2SC5706-TL-E | Identical electrical specs and TP-FA package; differs only in Pb-free but not halogen-free construction. | No functional difference in circuit operation; halogen-free requirement drives 2SC5706-TL-H selection for strict environmental compliance programs. | Select 2SC5706-TL-H when J-STD-609 Class 3 or IEC 61249-2-21 halogen-free certification is mandatory. |
| MJD127G | Lower IC = 2 A, higher VCE(sat) = 1.5 V min, TO-252 package but no dual-collector pinout. | Not suitable for >3 A continuous loads; requires larger base drive due to lower hFE (20–100). | Choose MJD127G only for space-constrained legacy designs where 2 A max current and relaxed efficiency targets apply. |
Compared with 2SC5706-TL-E, the 2SC5706-TL-H offers identical performance with enhanced environmental compliance; versus MJD127G, it provides 2.5× higher current capacity and 16× lower VCE(sat), enabling smaller heatsinks and higher system efficiency.
Availability
2SC5706-TL-H is available at Aetrix Electronics and suitable for DC/DC converters, lamp drivers, relay interfaces, and motor control circuits requiring stable component supply, halogen-free compliance, and high-current bipolar switching capability.
Supply support for 2SC5706-TL-H includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier focused on energy-efficient innovation for automotive, industrial, cloud, and IoT applications.
The 2SC5706 series belongs to onsemi's high-performance bipolar power transistor family, engineered specifically for high-current, low-saturation switching in industrial power conversion and electromechanical control systems.
FAQ
What is the maximum continuous collector current rating for the 2SC5706-TL-H?
The 2SC5706-TL-H is rated for 5 A continuous collector current (IC) at case temperature TC = 25°C. Derating is required above this temperature per the PC–TC curve in the datasheet; at TC = 75°C, the usable IC drops to approximately 3.2 A. This rating assumes proper PCB thermal design with ≥100 mm² 2-oz copper and thermal vias under the exposed collector pad.
Does the 2SC5706-TL-H have a dual-collector configuration, and how is it implemented?
Yes, the 2SC5706-TL-H features a dual-collector configuration with Pins 2 and 4 both connected to the collector terminal and electrically tied to the exposed thermal pad. This design reduces bond wire inductance and improves current sharing, directly supporting its 5 A continuous and 7.5 A pulsed current capability. The TP-FA package outline confirms Pins 2 and 4 as collector terminals in the official onsemi drawing No. 6912-7/10.
What is the typical VCE(sat) of the 2SC5706-TL-H at 2 A collector current?
The typical VCE(sat) of the 2SC5706-TL-H at IC = 2 A and IB = 100 mA is 160 mV, with a maximum of 240 mV. This value is specified in the Electrical Characteristics table under "VCE(sat)2" and is measured at TA = 25°C. At elevated temperatures (e.g., 75°C), VCE(sat) increases to ~190 mV typical, as shown in Figure IT02979 of the datasheet.
Is the 2SC5706-TL-H pin-compatible with the 2SC5706-TL-E?
Yes, the 2SC5706-TL-H is fully pin-compatible with the 2SC5706-TL-E - both use the identical TP-FA (SC-63/TO-252) package, share the same 4-pin layout (Base, Collector, Emitter, Collector), and have matching land patterns and thermal pad dimensions. The only difference is halogen-free material content in the 2SC5706-TL-H, with no impact on mechanical fit or electrical interface.
What is the gain-bandwidth product (fT) of the 2SC5706-TL-H, and under what conditions is it measured?
The gain-bandwidth product (fT) of the 2SC5706-TL-H is 400 MHz, measured at VCE = 10 V, IC = 500 mA, and f = 100 MHz. This parameter is specified in the Electrical Characteristics table and confirmed in Figure IT00167. It reflects the transistor's small-signal frequency limit and supports reliable operation in switching applications up to ~100 MHz with sufficient gain margin.
2SC5706-TL-H Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- -
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Not For New Designs
- Transistor Type:
- NPN
- Current - Collector (Ic) (Max):
- 5 A
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Vce Saturation (Max) @ Ib, Ic:
- 240mV @ 100mA, 2A
- Current - Collector Cutoff (Max):
- 1µA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 200 @ 500mA, 2V
- Power - Max:
- 800 mW
- Frequency - Transition:
- 400MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TP-FA
2SC5706-TL-H FAQ
1.How can I place an order for 2SC5706-TL-H through Aetrix?
Please submit a Request for Quotation (RFQ) for 2SC5706-TL-H on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 2SC5706-TL-H reliable?
The price and inventory of 2SC5706-TL-H are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 2SC5706-TL-H is usually 5 days.
3.What payment methods are accepted for 2SC5706-TL-H?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 2SC5706-TL-H transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 2SC5706-TL-H?
2SC5706-TL-H orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 2SC5706-TL-H order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 2SC5706-TL-H?
For technical support, including 2SC5706-TL-H datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 2SC5706-TL-H requirements.
6.How does Aetrix verify that 2SC5706-TL-H is sourced from the original manufacturer or authorized distributors?
All 2SC5706-TL-H products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 2SC5706-TL-H meets industry standards.
7.What is the process for return or replacement of 2SC5706-TL-H?
All 2SC5706-TL-H units undergo pre-shipment inspection (PSI). If there is an issue with 2SC5706-TL-H, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 2SC5706-TL-H part is unused and in its original packaging.
Return procedure for 2SC5706-TL-H:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
2SC5706-TL-H Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
