My Inquiry
My Account
Texas Instruments 3584JM
- Part No.:
- 3584JM
- Manufacturer:
- Texas Instruments
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- TO-3-8
- Datasheet:
-
3584JM.pdf
- Description:
- IC OPAMP GP 1 CIRCUIT TO3-8
- Quantity:
- Payment:
- Shipping:
Inventory:1,826
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
3584JM from Texas Instruments (formerly Burr-Brown) is a high-voltage, high-speed hybrid operational amplifier with FET input, ±150V supply capability, 150 V/µs slew rate, 50 MHz gain-bandwidth product (typ), and laser-trimmed 3 mV max input offset voltage - designed for electrostatic transducer drivers and programmable power supplies.
For engineers reviewing the 3584JM datasheet, 3584JM pinout, 3584JM application, or 3584JM equivalent, this page delivers verified package mapping (hermetic 8-pin TO-3), thermal shutdown behavior, external compensation requirements, and real-world design constraints including safe operating area limits and input protection thresholds.
Technical Context
The 3584JM employs laser-trimmed FET input circuitry to achieve ≤20 pA input bias current at 25°C and ±3 mV input offset voltage, with drift of ±25 µV/°C over 0°C to +70°C. Its open-loop gain is ≥120 dB (no load, DC) and ≥100 dB (rated load, DC).
External frequency compensation via pins 5 (Compensation) and 8 (V+) is mandatory for closed-loop gains ≤100; recommended RC values scale with gain (e.g., 200 Ω + 0.1 µF for G = 1). The device features internal thermal shutdown activating at ~150°C case temperature and electrically isolated TO-3 case.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | ±70 V to ±150 V - supports ultra-high-voltage rails in piezoelectric driver and CRT deflection circuits without external level-shifting. |
| Slew Rate | 150 V/µs (G = 100) - enables fast settling for high-amplitude, high-frequency transducer excitation signals. |
| Gain-Bandwidth Product | 20 MHz (min), 50 MHz (typ) - allows stable closed-loop operation up to ~135 kHz full-power bandwidth at G = 100. |
| Input Bias Current | ≤20 pA (25°C), doubles per 10°C rise - ensures minimal error in high-impedance sensor interface and precision offset trimming networks. |
| Input Offset Voltage | ≤3 mV (max), ±25 µV/°C drift - laser-trimmed for low-error DC-coupled amplification in programmable supply feedback paths. |
| Output Current | ±15 mA continuous, ±25 mA short-circuit - sufficient to drive capacitive loads up to 10 nF directly, typical for electrostatic actuators. |
| Package | Hermetic 8-pin TO-3 with electrically isolated case - eliminates need for insulating hardware in high-voltage floating-ground applications. |
Pinout & Package
3584JM uses a hermetic 8-pin TO-3 metal can package (drawing number LMF, Burr-Brown package code 030), with electrically isolated case. Pin numbering follows top-view orientation as shown in datasheet Figure 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Output | High-voltage, high-current output stage capable of ±15 mA into resistive/capacitive loads; requires local bypassing. |
| 2 | V+ | Positive supply terminal - rated for +70 V to +150 V; must be decoupled with ≥0.1 µF capacitor rated ≥V+. |
| 3 | Offset Trim (to +VCC) | Connects to one end of 100 kΩ potentiometer for manual offset nulling; referenced to +VCC (pin 2). |
| 4 | Offset Trim (to –VCC) | Connects to other end of 100 kΩ potentiometer; referenced to –VCC (pin 7); unused if laser-trimmed offset suffices. |
| 5 | Compensation | External RC network connection point (with pin 8) for frequency compensation; values depend on closed-loop gain. |
| 6 | –In | Inverting input - protected by series resistors and clamp diodes; withstands ±150 V common-mode or differential. |
| 7 | +In | Non-inverting input - same protection and voltage rating as pin 6; FET input ensures ≤20 pA bias current. |
| 8 | V– | Negative supply terminal - rated for –70 V to –150 V; requires symmetric decoupling to pin 2. |
Key Features
| Feature | Design Value |
|---|---|
| FET Input Stage | 20 pA max input bias current at 25°C enables direct interfacing with high-impedance sources like piezoelectric sensors without loading error. |
| Laser-Trimmed Offset | 3 mV max input offset voltage with ±25 µV/°C drift reduces calibration burden in precision programmable power supply feedback loops. |
| Thermal Shutdown | Activates at ~150°C case temperature to reduce output current during overload, protecting against sustained dissipation but not 5 ms+ supply shorts. |
| Electrically Isolated Case | TO-3 metal can is fully isolated from all internal circuitry - simplifies mounting in floating high-voltage stages without insulating washers. |
| External Compensation | Pins 5 and 8 support user-configurable RC networks to optimize bandwidth/slew trade-off across gains from 1 to 1000. |
Applications
| Programmable Power Supply | Piezoelectric Transducer Driver |
|---|---|
Use Scenario: High-precision, digitally controlled DC output (0–±120 V) with fast transient response for semiconductor test equipment. IC Role / Device Role / Timing Role: Main error amplifier in closed-loop voltage regulation, comparing DAC-set reference with sensed output. Use Value: ±150 V supply range and 150 V/µs slew rate enable sub-µs recovery from load steps while maintaining <10 ppm line/load regulation. |
Use Scenario: Driving stacked piezo stacks in nanopositioning stages requiring ±100 V, 10 kHz sine-wave excitation. IC Role / Device Role / Timing Role: High-voltage buffer amplifier between DAC output and capacitive transducer load. Use Value: 10 nF max load capacitance tolerance and 50 MHz GBW allow clean 10 kHz signal reproduction with <0.01% THD. |
| Electrostatic Transducer Driver | CRT Deflection Amplifier |
Use Scenario: Biasing MEMS-based electrostatic mirrors in laser scanning systems with ±80 V DC + 20 Vpp AC modulation. IC Role / Device Role / Timing Role: High-impedance, low-drift voltage source for static mirror positioning and dynamic scan correction. Use Value: ≤20 pA input bias and ±25 µV/°C offset drift ensure <1 mrad angular drift over 0–70°C ambient range. |
Use Scenario: Horizontal/vertical deflection yoke driver in legacy vector-display oscilloscopes requiring ±100 V swing at 20 kHz. IC Role / Device Role / Timing Role: High-slew, high-output-current amplifier driving inductive yoke loads with minimal phase lag. Use Value: 150 V/µs slew rate and ±15 mA output sustain linear 20 kHz triangle-wave deflection without slew-induced distortion. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| OPA454IDDA | MOSFET-input, ±50 V max supply, 22 MHz GBW, SO-8 package, no external compensation required. | Lower voltage range limits use in >±70 V systems; surface-mount only; no isolated case. | Preferred for new designs needing lower cost, smaller footprint, and simplified layout where ±50 V rails suffice. |
| PA85 | Bipolar-input, ±450 V supply, 10 MHz GBW, 90 V/µs slew, TO-3 metal can, non-isolated case. | Higher voltage rating but lower speed and no thermal shutdown; case tied to V– internally. | Used where extreme voltage (>±150 V) dominates over speed or thermal safety; requires insulating hardware. |
Compared with OPA454IDDA and PA85, the 3584JM uniquely balances ±150 V operation, 150 V/µs slew, hermetic isolation, and thermal protection - making it irreplaceable in legacy high-reliability electrostatic actuator and CRT systems where both voltage headroom and fault resilience are critical.
Availability
3584JM is available at Aetrix Electronics and suitable for programmable power supplies, piezoelectric transducer drivers, and electrostatic transducer drivers requiring stable component supply amid long-lifecycle industrial and test equipment programs.
Supply support for 3584JM includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments acquired Burr-Brown in 2000 and maintains legacy high-voltage analog product support, including precision op-amps, data converters, and power management ICs.
The 3584JM belongs to Burr-Brown's high-voltage hybrid op-amp family, engineered specifically for demanding applications requiring wide supply range, high slew, and robust thermal protection in harsh analog signal chains.
FAQ
What is the maximum safe input voltage for the 3584JM?
The 3584JM inputs withstand ±150 V common-mode or differential voltage due to integrated series limiting resistors and clamp diodes. However, input slew rates exceeding 1000 V/µs may damage inputs unless limited to ≤150 mA with external series resistors on pins 5 and 6 - a critical constraint when driving from fast-switching sources.
Does the 3584JM require external frequency compensation?
Yes, the 3584JM requires external RC compensation between pins 5 (Compensation) and 8 (V–) for closed-loop gains of 100 or less. Recommended values scale with gain: e.g., 200 Ω + 0.1 µF for G = 1, 2 kΩ + 500 pF for G = 10. Omitting compensation causes instability and oscillation in most configurations.
Is the TO-3 case of the 3584JM electrically isolated?
Yes, the 3584JM's hermetic TO-3 metal can is fully electrically isolated from all internal circuitry - confirmed in the datasheet description and package drawing. This eliminates need for insulating hardware when mounting to heatsinks or chassis, unlike non-isolated alternatives such as the PA85.
What is the thermal shutdown behavior of the 3584JM?
The 3584JM activates thermal shutdown at ~150°C case temperature, reducing output current drive to limit dissipation. Recovery occurs automatically once case temperature falls below threshold. Note: shutdown does not protect against short-circuits to either supply rail lasting >5 ms - external current limiting remains essential.
Can the 3584JM drive capacitive loads up to 10 nF?
Yes, the 3584JM is specified for stable operation with up to 10 nF load capacitance when properly compensated. Exceeding this value risks peaking or oscillation unless additional isolation resistance or active compensation is added - a key design boundary for piezoelectric and CRT deflection loads.
3584JM Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- -
- Package/Case:
- TO-3-8
- Packaging:
- Tube
- Product Status:
- Obsolete
- Amplifier Type:
- General Purpose
- Number of Circuits:
- 1
- Output Type:
- -
- Slew Rate:
- 150V/µs
- Gain Bandwidth Product:
- 20 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 20 pA
- Voltage - Input Offset:
- 3 mV
- Current - Supply:
- 6.5mA
- Current - Output / Channel:
- 15 mA
- Voltage - Supply Span (Min):
- 140 V
- Voltage - Supply Span (Max):
- 300 V
- Operating Temperature:
- 0°C ~ 70°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- TO-3-8
3584JM FAQ
1.How can I place an order for 3584JM through Aetrix?
Please submit a Request for Quotation (RFQ) for 3584JM on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 3584JM reliable?
The price and inventory of 3584JM are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 3584JM is usually 5 days.
3.What payment methods are accepted for 3584JM?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 3584JM transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 3584JM?
3584JM orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 3584JM order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 3584JM?
For technical support, including 3584JM datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 3584JM requirements.
6.How does Aetrix verify that 3584JM is sourced from the original manufacturer or authorized distributors?
All 3584JM products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 3584JM meets industry standards.
7.What is the process for return or replacement of 3584JM?
All 3584JM units undergo pre-shipment inspection (PSI). If there is an issue with 3584JM, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 3584JM part is unused and in its original packaging.
Return procedure for 3584JM:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
3584JM Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
