Skyworks Solutions Inc. 510DBA100M000BAG

Overview

510DBA100M000BAG from Skyworks Solutions is a factory-programmed, low-jitter crystal oscillator (XO) delivering 100.000 MHz output with ±30 ppm total stability (including 10-year aging), 3.3 V supply, LVDS output format, and operation from –40 °C to +85 °C in a 5 × 7 mm surface-mount package. It serves as a precision timing reference in high-speed serial interfaces requiring deterministic jitter performance.

For engineers reviewing the 510DBA100M000BAG datasheet, 510DBA100M000BAG pinout, 510DBA100M000BAG application, or 510DBA100M000BAG equivalent, this device supports critical clocking requirements in PCIe Gen3/Gen4, Gigabit Ethernet PHYs, and FPGA-based data acquisition systems where sub-1.0 ps RMS phase jitter (12 kHz–20 MHz) and supply noise rejection are essential.

Technical Context

The 510DBA100M000BAG implements Skyworks' DSPLL® synthesis architecture, using a fixed-frequency crystal resonator and on-chip digital PLL to generate its precise 100.000 MHz LVDS output - eliminating crystal variability and enabling guaranteed reliability across temperature and aging. Its integrated LDO regulator provides >3.0 ps/mV supply-induced jitter suppression at 100 kHz.

This Si510-series XO features active-high OE control on Pin 2, complementary LVDS outputs (CLK+/CLK−), and full production testing of crystal ESR and DLD to ensure long-term frequency stability. The device operates with 19–23 mA supply current and achieves 48–52% duty cycle accuracy over its full temperature range.

Key Specifications

Pinout & Package

510DBA100M000BAG uses the Si510 6-pin 5 × 7 mm package with LVDS output configuration (OE on Pin 2). The package is RoHS-compliant, Pb-free, and features gold-over-nickel contact pads.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar oscillator applications.

Compared with Si510DBA100M000AAG and SG-8018CE, the 510DBA100M000BAG delivers superior thermal management via its 5 × 7 mm CLCC package and guaranteed 10-year aging performance - making it optimal for infrastructure equipment with >7-year service life requirements.

Availability

510DBA100M000BAG is available at Aetrix Electronics and suitable for PCIe Gen3/Gen4 root complexes, Gigabit Ethernet PHYs, and FPGA-based data acquisition systems requiring stable component supply with ≤4-week lead times.

Supply support for 510DBA100M000BAG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Skyworks Solutions is a global semiconductor company specializing in analog and mixed-signal connectivity solutions, with leadership in RF, timing, and power management technologies.

The Si510/511 family was designed to replace traditional quartz XOs with programmable, high-reliability DSPLL-based oscillators for networking, computing, and broadcast infrastructure - prioritizing jitter performance, supply noise immunity, and long-term stability.

FAQ

What output format and supply voltage does the 510DBA100M000BAG use?

The 510DBA100M000BAG is configured for LVDS output and 3.3 V supply, as indicated by the "D" (3.3 V LVDS) and "B" (±30 ppm stability) codes in its part number. It draws 19–23 mA when enabled and supports active-high OE control on Pin 2. This configuration is validated per Skyworks' Si510 datasheet Rev. 1.4, Table 1 and Table 2.

Does the 510DBA100M000BAG include an integrated LDO regulator?

Yes, the 510DBA100M000BAG integrates an on-chip LDO regulator that provides supply noise filtering - demonstrated by its 3.0–3.5 ps/mV additive jitter sensitivity to 10–1000 kHz VDD noise (Table 4, JPSR). This eliminates the need for external LDOs in most FPGA/ASIC clocking applications, reducing bill-of-materials cost and board area.

What is the total frequency stability specification for the 510DBA100M000BAG?

The 510DBA100M000BAG guarantees ±30 ppm total stability, which includes initial calibration, temperature variation (–40 °C to +85 °C), supply voltage change, load variation, mechanical stress, and 10 years of aging at 40 °C - as defined in Table 2, Note *. This exceeds typical quartz XO specifications and is verified per production test flow.

Can the 510DBA100M000BAG be used as a drop-in replacement for legacy 5×7 mm XOs?

Yes, the 510DBA100M000BAG uses the standard 5 × 7 mm, 6-pin CLCC package with identical land pattern (Figure 6 and Table 16) and pinout (Table 12) as legacy oscillators. Its OE-active-high logic, LVDS drive strength, and 100 MHz output allow direct substitution without PCB changes - provided the host design supports 3.3 V LVDS signaling and 100 Ω differential termination.

What is the startup time and enable/disable timing behavior of the 510DBA100M000BAG?

The 510DBA100M000BAG has a maximum startup time (T_SU) of 10 ms from minimum VDD until output reaches specification, and enable/disable times of ≤20 µs (enable) and ≤5 µs (disable) for frequencies ≥10 MHz (Table 2). These values are production-tested and apply across the full operating temperature range.