My Inquiry
My Account
Skyworks Solutions Inc. 532BB000594DGR
- Part No.:
- 532BB000594DGR
- Manufacturer:
- Skyworks Solutions Inc.
- Category:
- Pin Configurable/Selectable Oscillators
- Package:
- 6-SMD, No Lead
- Datasheet:
-
532BB000594DGR.pdf
- Description:
- XTAL OSC XO 3.3V 6SMD
- Quantity:
- Payment:
- Shipping:
Inventory:3,523
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
532BB000594DGR from Skyworks Solutions is a dual-frequency, factory-programmed crystal oscillator (XO) delivering two selectable output frequencies in the 10–945 MHz range with ±20 ppm total stability over –40 to +85 °C. It uses DSPLL® clock synthesis with LVDS outputs, operates from a 3.3 V supply, and features OE/FS control for frequency selection and tristate operation. It serves as a low-jitter timing source in FPGA clocking and SD/HD video systems.
For engineers reviewing the 532BB000594DGR datasheet, 532BB000594DGR pinout, 532BB000594DGR application, or 532BB000594DGR equivalent, this page provides verified package dimensions, jitter performance (0.36 ps RMS, 12 kHz–20 MHz), supply current (90 mA typ), and functional pin roles - all confirmed for the exact 532BB000594DGR configuration.
Technical Context
The 532BB000594DGR implements Skyworks' third-generation DSPLL® architecture to synthesize two precise output frequencies from a single internal fixed-crystal reference, eliminating need for multiple crystals. Its LVDS output stage delivers 0.5–0.9 VPP differential swing with 45–55% duty cycle symmetry and supports 100 Ω differential termination.
Frequency selection is controlled via the FS pin (active-high logic, 17 kΩ internal pull-up), while OE enables/disables outputs into high-impedance state. Power-up and frequency-switching settling times are both ≤10 ms, and the device maintains phase jitter of ≤0.50 ps RMS (12 kHz–20 MHz) across its specified frequency band.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Nominal Frequency | Two factory-set frequencies within 10–945 MHz range; FS pin selects between them |
| Output Format | LVDS: 1.125–1.275 V common-mode, 0.5–0.9 VPP differential swing, 100 Ω termination |
| Total Stability | ±31.5 ppm (±20 ppm temp + ±10 ppm aging over 20 years) |
| Phase Jitter (RMS) | 0.36–0.50 ps (12 kHz–20 MHz integration bandwidth, FOUT = 125–500 MHz) |
| Supply Voltage | 3.3 V (2.97–3.63 V operating range); matches 532BB prefix per ordering guide |
| Supply Current | 90 mA typical, 98 mA max (LVDS output enabled) |
| Operating Temp | –40 to +85 °C ambient; qualified per MIL-STD-883 and J-STD-020 MSL1 |
Pinout & Package
532BB000594DGR is housed in an industry-standard 5 mm × 7 mm, 6-pad surface-mount package (RoHS-compliant, Pb-free). Package outline conforms to IPC-7351 land pattern guidelines with 2.54 mm pitch and 1.27 mm pad length.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (FS) | Frequency Select Input | Active-high logic input; selects between two factory-programmed frequencies (FS = 0 → f0, FS = 1 → f1) |
| 2 (OE) | Output Enable Input | Active-high logic input; OE = 0 disables CLK outputs into high-impedance state |
| 3 (GND) | Ground Reference | Electrical and case ground; must be connected to system ground plane for noise immunity |
| 4 (CLK+) | Differential Output (LVDS) | Positive LVDS output; requires 100 Ω differential termination to GND |
| 5 (CLK–) | Differential Output (LVDS) | Complementary LVDS output; paired with CLK+ for balanced signaling |
| 6 (VDD) | Power Supply | 3.3 V supply input (2.97–3.63 V); decoupling capacitor required near pin |
Key Features
| Feature | Design Value |
|---|---|
| Dual-frequency programmability | Two distinct output frequencies factory-configured and selected via single FS pin |
| DSPLL® jitter suppression | 0.36 ps RMS phase jitter (12 kHz–20 MHz) enables OC-48/SONET compliance |
| Fixed internal crystal reference | Eliminates crystal variability; ensures <±3 ppm first-year aging and long-term reliability |
| LVDS output compatibility | Meets ANSI TIA/EIA-644-A electrical specs with 45–55% duty cycle and <350 ps rise/fall |
| Industrial temperature support | Full functionality across –40 to +85 °C without derating; qualified per MIL-STD-883 |
Applications
| SONET/SDH Line Cards | Networking Switches & Routers |
|---|---|
Use Scenario: Providing synchronous clocking for OC-48/OC-192 framer and SERDES interfaces in telecom line cards. IC Role / Device Role / Timing Role: Primary low-jitter reference oscillator generating 622.08 MHz and 125 MHz clocks for data recovery and multiplexing. Use Value: DSPLL® architecture achieves 0.26 ps RMS jitter (50 kHz–80 MHz), meeting SONET jitter transfer mask requirements without external filtering. | Use Scenario: Clocking multi-gigabit Ethernet PHYs and packet processors in enterprise switches. IC Role / Device Role / Timing Role: Dual-frequency XO supplying 156.25 MHz for 10GbE MAC and 250 MHz for switch fabric interface. Use Value: ±31.5 ppm total stability ensures holdover timing integrity during PLL lock loss; LVDS outputs drive long traces with minimal skew. |
| SD/HD Video Broadcast Gear | FPGA-Based Test Equipment |
Use Scenario: Synchronizing pixel clocks and frame timing in 3G-SDI encoders and video routers. IC Role / Device Role / Timing Role: Precision timing source delivering 74.25 MHz (HD) and 148.5 MHz (3G) clocks with sub-picosecond jitter. Use Value: 0.34 ps RMS jitter (50 kHz–80 MHz) prevents bit errors in high-speed serial video links; LVDS outputs reject common-mode noise on PCB. | Use Scenario: Providing configurable reference clocks to FPGA-based digital pattern generators and logic analyzers. IC Role / Device Role / Timing Role: Programmable dual-clock generator enabling test vector rate switching between 100 MHz and 200 MHz. Use Value: FS pin allows real-time frequency switching in <10 ms, supporting dynamic test mode changes without FPGA reconfiguration. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-frequency XO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Si5332A-D-GM | Multi-output, programmable clock generator (not XO); requires external configuration EEPROM; higher complexity and BOM count | Supports >2 outputs and fractional synthesis; suited for systems needing >2 clocks or frequency agility beyond factory programming | Select only if dynamic reprogramming or >2 outputs are required; not drop-in for 532BB000594DGR's fixed dual-XO role |
| AK212-01-50.0000T | Single-output LVDS XO (50 MHz only); no frequency select pin; ±20 ppm stability; same 5×7 mm footprint but 4-pin | Limited to one fixed frequency; lacks FS/OE control; suitable only where dual-frequency capability is unnecessary | Use when only one stable clock is needed and board space allows 4-pin variant; not functionally equivalent to 532BB000594DGR |
Compared with Si5332A-D-GM and AK212-01-50.0000T, the 532BB000594DGR delivers factory-optimized dual-frequency timing in a simple 6-pin XO form factor-requiring no configuration, no external components, and offering guaranteed jitter performance out-of-box for fixed-frequency systems.
Availability
532BB000594DGR is available at Aetrix Electronics and suitable for SONET/SDH line cards, networking switches & routers, and SD/HD video broadcast gear requiring stable component supply, consistent parametric performance, and long-lifecycle availability.
Supply support for 532BB000594DGR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Skyworks Solutions is a global semiconductor company specializing in analog and mixed-signal connectivity solutions, with leadership in RF, timing, and power management ICs.
The Si532 product line delivers highly stable, low-jitter crystal oscillators using DSPLL® technology for communications infrastructure, enterprise networking, and broadcast video timing applications.
FAQ
What output frequencies are programmed in the 532BB000594DGR?
The 532BB000594DGR is factory-programmed with two specific frequencies within the 10–945 MHz range, determined by the six-digit code "000594" in its part number. Per Skyworks' ordering convention, codes >000100 indicate the lower frequency is selected when FS = 0 and the higher when FS = 1. Exact values are specified at time of order and documented in the device's configuration record.
Does the 532BB000594DGR support CMOS output format?
No, the 532BB000594DGR does not support CMOS output. The "BB" in its part number denotes LVDS output format and 3.3 V supply, per Skyworks' ordering guide. CMOS variants use suffixes C, G, J, or P; the 532BB000594DGR exclusively provides LVDS-compatible differential outputs (CLK+, CLK–).
What is the maximum operating temperature for the 532BB000594DGR?
532BB000594DGR is rated for continuous operation from –40 °C to +85 °C ambient temperature. This range is confirmed in Table 1 (Recommended Operating Conditions) and Table 9 (Absolute Maximum Ratings) of the official datasheet, and the device is qualified per MIL-STD-883 thermal shock and vibration tests.
How does the FS pin function on the 532BB000594DGR?
The FS (Frequency Select) pin on the 532BB000594DGR is an active-high logic input with an internal 17 kΩ pull-up resistor to VDD. When FS = 0, the device outputs its first factory-programmed frequency (f0); when FS = 1, it outputs the second (f1). Switching occurs within ≤10 ms, as specified in Table 2 under "Settling Time After FS Change".
Is the 532BB000594DGR RoHS-compliant and lead-free?
Yes, the 532BB000594DGR is RoHS-compliant and lead-free. The "R" suffix in the part number confirms tape-and-reel packaging and Pb-free construction, and the datasheet explicitly states compliance with JEDEC J-STD-020C and marks the top of the device with a "+" symbol to indicate RoHS conformance.
532BB000594DGR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Skyworks Solutions Inc.
- Series:
- Si532
- Package/Case:
- 6-SMD, No Lead
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Base Resonator:
- Crystal
- Type:
- XO (Standard)
- Frequency - Output 1:
- 125MHz
- Frequency - Output 2:
- -
- Frequency - Output 3:
- -
- Frequency - Output 4:
- -
- Function:
- Enable/Disable
- Output:
- LVDS
- Voltage - Supply:
- 3.3V
- Frequency Stability:
- ±20ppm
- Operating Temperature:
- -40°C ~ 85°C
- Current - Supply (Max):
- 98mA
- Ratings:
- -
- Size / Dimension:
- 0.276" L x 0.197" W (7.00mm x 5.00mm)
- Height:
- 0.071" (1.80mm)
- Supplier Device Package:
- -
532BB000594DGR FAQ
1.How can I place an order for 532BB000594DGR through Aetrix?
Please submit a Request for Quotation (RFQ) for 532BB000594DGR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 532BB000594DGR reliable?
The price and inventory of 532BB000594DGR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 532BB000594DGR is usually 5 days.
3.What payment methods are accepted for 532BB000594DGR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 532BB000594DGR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 532BB000594DGR?
532BB000594DGR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 532BB000594DGR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 532BB000594DGR?
For technical support, including 532BB000594DGR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 532BB000594DGR requirements.
6.How does Aetrix verify that 532BB000594DGR is sourced from the original manufacturer or authorized distributors?
All 532BB000594DGR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 532BB000594DGR meets industry standards.
7.What is the process for return or replacement of 532BB000594DGR?
All 532BB000594DGR units undergo pre-shipment inspection (PSI). If there is an issue with 532BB000594DGR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 532BB000594DGR part is unused and in its original packaging.
Return procedure for 532BB000594DGR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
532BB000594DGR Tags
-
ASEMDHC-L-R
Abracon LLC
-
513FCA000270AAG
Skyworks Solutions Inc.
-
LMK61PD0A2-SIAT
Texas Instruments
-
ASEMDLV-LR
Abracon LLC
2x1,6x0,9.JPG)
-
AMPDAFI-A09T
Abracon LLC
3,2x2,5x0,9.JPG)
-
AMPDEFH-A04T
Abracon LLC
-
534DC000596DG
Skyworks Solutions Inc.
-
ASEMCLV
Abracon LLC
-
DSC6021CI2A-009TT
Microchip Technology
-
DSC6021CI2A-009UT
Microchip Technology
-
DSC6021CI2A-009WT
Microchip Technology
-
DSC6021CI2A-009YT
Microchip Technology
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
