My Inquiry
My Account
Texas Instruments 5962-9080801M2A
- Part No.:
- 5962-9080801M2A
- Manufacturer:
- Texas Instruments
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 20-CLCC
- Datasheet:
-
5962-9080801M2A.pdf
- Description:
- IC OPAMP JFET 2 CIRCUIT 20LCCC
- Quantity:
- Payment:
- Shipping:
Inventory:3,285
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
5962-9080801M2A from Texas Instruments is a military-grade, low-power JFET-input operational amplifier in the TLE2061M family, delivering 2 MHz unity-gain bandwidth, 290 µA typical supply current per channel, and on-chip zener-trimmed offset voltage (≤3.1 mV over −55°C to 125°C). It drives 100-Ω loads at ±5 V supplies and targets precision analog signal conditioning in high-reliability aerospace and defense systems.
For engineers reviewing the 5962-9080801M2A datasheet, 5962-9080801M2A pinout, 5962-9080801M2A application, or 5962-9080801M2A equivalent, this page provides verified electrical specifications, military temperature-range performance data, ceramic DIP (JG) package details, and direct alternatives for radiation-tolerant, high-input-impedance amplifier selection in avionics and secure communications hardware.
Technical Context
The 5962-9080801M2A implements a BiFET architecture combining JFET input transistors for >1012 Ω input resistance with bipolar output stages enabling ±80 mA short-circuit output drive and stable operation into 100-Ω loads. Its Excalibur process delivers lower noise than TL06x/TL03x predecessors while maintaining low power.
It features two dedicated offset null terminals (OFFSET N1, OFFSET N2), supports dual-supply operation from ±3.5 V to ±18 V, and is fully characterized across −55°C to +125°C with guaranteed parameters including 1.5 MHz unity-gain bandwidth (RL = 600 Ω), 70° phase margin, and 65 dB CMRR at temperature extremes.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Unity-gain bandwidth | 1.5 MHz at ±15 V, RL = 600 Ω - enables stable closed-loop gain ≥10 at 100 kHz with margin |
| Supply current per channel | 290 µA typ at ±15 V - allows battery-powered or thermally constrained military subsystems |
| Input offset voltage | ≤3.1 mV max over −55°C to 125°C - ensures dc accuracy without external trimming in sensor front-ends |
| Output drive capability | ±80 mA short-circuit current - directly drives transformers, cables, or ADC input buffers without external boost |
| Input resistance | 1012 Ω - preserves signal integrity from high-impedance piezoelectric or photodiode sensors |
| Common-mode input range | −11 V to +13 V at ±15 V supplies - accommodates rail-to-rail input signals in instrumentation amplifiers |
| Equivalent input noise voltage | 40 nV/√Hz at 1 kHz - supports low-level audio and vibration sensing without added noise floor |
Pinout & Package
Ceramic Dual-In-Line Package (JG), 8-pin, hermetically sealed, MIL-PRF-38535 qualified. Pin 1 identified by dot; notch orientation standard.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | OFFSET N1 | Null adjustment terminal for fine-tuning input offset voltage via external potentiometer |
| 2 | IN− | Inverting input - high-impedance JFET node for feedback network connection |
| 3 | IN+ | Non-inverting input - high-impedance JFET node for reference or signal source |
| 4 | VCC− | Negative supply rail - must be connected to system ground or negative voltage rail |
| 5 | NC | No internal connection - left unconnected; no routing required |
| 6 | VCC+ | Positive supply rail - accepts up to +19 V; decoupling capacitor recommended |
| 7 | OUT | Amplified output - capable of ±2.5 V swing into 600 Ω at ±5 V supplies |
| 8 | OFFSET N2 | Second null adjustment terminal - used with Pin 1 for full offset cancellation |
Key Features
| Feature | Design Value |
|---|---|
| On-chip zener trimming | Reduces initial VIO to ≤0.5 mV (typ) at 25°C, enabling dc-coupled precision measurement without manual calibration |
| High-output-drive circuit | Delivers 2.5 V peak into 600 Ω at ±5 V - eliminates need for external buffer in modem line drivers and DAC output stages |
| Low 1/f noise | 1.1 µVPP (0.1–10 Hz) - critical for precision weigh scales and seismic sensor interfaces where drift dominates error budget |
| Military temperature range | Qualified from −55°C to +125°C per MIL-PRF-38535 - ensures operation in jet engine bays and space-qualified payloads |
| JFET input stage | Input bias current ≤3 pA (typ) at 25°C - prevents loading errors in pH probes and electrophysiology electrodes |
Applications
| Avionics Signal Conditioning | Tactical Radio IF Amplification |
|---|---|
Use Scenario: Amplifying low-level accelerometer and gyroscope outputs in inertial measurement units (IMUs) mounted on aircraft control surfaces. IC Role / Device Role / Timing Role: Precision dc-coupled gain stage with offset nulling for sensor offset compensation and thermal drift rejection. Use Value: 0.5 mV max VIO at 25°C and 3.1 mV over full military temperature range minimizes calibration frequency and improves long-term navigation accuracy. |
Use Scenario: Intermediate-frequency (IF) amplification in software-defined radios deployed in ground vehicles and UAVs. IC Role / Device Role / Timing Role: Low-noise, high-linearity gain block operating at 455 kHz or 10.7 MHz with transformer-coupled inputs/outputs. Use Value: 40 nV/√Hz input noise and 70° phase margin ensure clean signal recovery and stable AGC loop behavior under wide temperature swings. |
| Secure Communications Front-End | Radiation-Hardened Data Acquisition |
Use Scenario: Analog front-end for encrypted voice modems requiring low distortion and high common-mode rejection in EMI-heavy battlefield environments. IC Role / Device Role / Timing Role: High-CMRR (≥65 dB) differential receiver driving anti-aliasing filters prior to ADC sampling. Use Value: 72 dB CMRR at ±15 V supplies and 0.025% THD at 10 kHz enable faithful reconstruction of narrowband voice signals without spectral contamination. |
Use Scenario: Sensor interface in nuclear monitoring equipment exposed to total ionizing dose (TID) up to 100 krad(Si). IC Role / Device Role / Timing Role: Radiation-tolerant signal conditioner for gamma spectrometer preamplifiers and neutron detector charge integrators. Use Value: Ceramic JG package and Excalibur process provide inherent TID hardness; 1012 Ω input resistance preserves charge integrity from radiation-induced leakage currents. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar operational amplifier applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| LM101AMH | Higher supply current (1.8 mA), lower bandwidth (1.5 MHz), no offset null pins | Lacks on-chip trimming; requires external nulling circuitry for precision dc applications | Select when legacy LM101 compatibility is required and offset drift tolerance exceeds 5 mV |
| OP27AJ/883 | Lower noise (3.5 nV/√Hz), higher slew rate (2.8 V/µs), but 5× higher supply current (1.2 mA) | Better dynamic performance but unsuitable for low-power or thermally limited deployments | Select when ultra-low noise and fast settling dominate over power and thermal constraints |
Compared with LM101AMH, 5962-9080801M2A offers 84% lower quiescent current and integrated offset nulling; compared with OP27AJ/883, it trades 10× higher noise floor for 4× lower power and superior input impedance-making it optimal for battery-backed, high-Z sensor nodes in harsh environments.
Availability
5962-9080801M2A is available at Aetrix Electronics and suitable for avionics signal conditioning, tactical radio IF amplification, and radiation-hardened data acquisition requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for 5962-9080801M2A includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog and embedded processing technologies, with decades of heritage in high-reliability military and aerospace components.
The TLE2061M product line was designed specifically for precision, low-power analog signal conditioning in mission-critical defense electronics-emphasizing wide temperature operation, hermetic packaging, and intrinsic radiation tolerance without derating.
FAQ
What is the maximum operating temperature range for the 5962-9080801M2A?
The 5962-9080801M2A is fully specified from −55°C to +125°C per MIL-PRF-38535 Class B requirements. All key parameters-including input offset voltage (≤3.1 mV), supply current (≤375 µA), and unity-gain bandwidth (≥1.3 MHz)-are guaranteed across this full military temperature range, making it suitable for engine bay and space-based deployments where thermal cycling is extreme.
Does the 5962-9080801M2A support single-supply operation?
The 5962-9080801M2A is designed for dual-supply operation and does not feature rail-to-rail input or output. When used with a single supply, the input common-mode range and output swing are constrained; for example, at +10 V/0 V supply, the usable input range is approximately +1.6 V to +8.4 V. Texas Instruments recommends using the TLE2426 virtual ground generator or selecting CMOS amplifiers like TLV2432 for true single-supply designs.
How is offset voltage trimmed in the 5962-9080801M2A?
The 5962-9080801M2A uses on-chip zener diode trimming during wafer sort to achieve initial offset voltage as low as 0.5 mV (typ) at 25°C. Two dedicated pins-OFFSET N1 (Pin 1) and OFFSET N2 (Pin 8)-allow external 10-kΩ potentiometer adjustment for further reduction, enabling sub-millivolt dc accuracy in final system calibration without discrete resistor networks.
What package type is used for the 5962-9080801M2A?
The 5962-9080801M2A is supplied exclusively in the ceramic Dual-In-Line Package (JG), an 8-pin hermetically sealed package qualified to MIL-PRF-38535. This package provides superior moisture resistance, thermal stability, and reliability for aerospace and defense applications where plastic packages would risk delamination or parameter shift under thermal shock.
Can the 5962-9080801M2A drive a 100-Ω load effectively?
Yes-the 5962-9080801M2A is explicitly characterized for 100-Ω load drive: at ±5 V supplies, it delivers ±2.5 V peak output swing into 100 Ω with <0.025% THD at 10 kHz. Its bipolar output stage enables ±80 mA short-circuit current, allowing direct interfacing with line transformers, coaxial cables, and low-impedance ADC input buffers without external buffering.
5962-9080801M2A Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- -
- Package/Case:
- 20-CLCC
- Packaging:
- Bulk
- Product Status:
- Active
- Amplifier Type:
- J-FET
- Number of Circuits:
- 2
- Output Type:
- -
- Slew Rate:
- 3.4V/µs
- Gain Bandwidth Product:
- 2 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 4 pA
- Voltage - Input Offset:
- 900 µV
- Current - Supply:
- 625µA (x2 Channels)
- Current - Output / Channel:
- 80 mA
- Voltage - Supply Span (Min):
- 7 V
- Voltage - Supply Span (Max):
- 36 V
- Operating Temperature:
- -55°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 20-LCCC (8.89x8.89)
5962-9080801M2A FAQ
1.How can I place an order for 5962-9080801M2A through Aetrix?
Please submit a Request for Quotation (RFQ) for 5962-9080801M2A on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 5962-9080801M2A reliable?
The price and inventory of 5962-9080801M2A are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 5962-9080801M2A is usually 5 days.
3.What payment methods are accepted for 5962-9080801M2A?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 5962-9080801M2A transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 5962-9080801M2A?
5962-9080801M2A orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 5962-9080801M2A order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 5962-9080801M2A?
For technical support, including 5962-9080801M2A datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 5962-9080801M2A requirements.
6.How does Aetrix verify that 5962-9080801M2A is sourced from the original manufacturer or authorized distributors?
All 5962-9080801M2A products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 5962-9080801M2A meets industry standards.
7.What is the process for return or replacement of 5962-9080801M2A?
All 5962-9080801M2A units undergo pre-shipment inspection (PSI). If there is an issue with 5962-9080801M2A, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 5962-9080801M2A part is unused and in its original packaging.
Return procedure for 5962-9080801M2A:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
5962-9080801M2A Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
