My Inquiry
My Account
Texas Instruments 5962-9088204QPA
- Part No.:
- 5962-9088204QPA
- Manufacturer:
- Texas Instruments
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 8-CDIP (0.300", 7.62mm)
- Datasheet:
-
5962-9088204QPA.pdf
- Description:
- IC CMOS 2 CIRCUIT 8CDIP
- Quantity:
- Payment:
- Shipping:
Inventory:8,858
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
5962-9088204QPA from Texas Instruments is a precision, low-noise, rail-to-rail output operational amplifier using Advanced LinCMOS™ process. It delivers 500 µV max input offset voltage, 30 nV/√Hz max input noise at 10 Hz, and 12 nV/√Hz max at 1 kHz, operating across −55°C to +125°C in military-grade ceramic DIP (JG) package. It serves high-impedance sensor signal conditioning in single- or split-supply instrumentation.
For engineers reviewing the 5962-9088204QPA datasheet, 5962-9088204QPA pinout, 5962-9088204QPA application, or 5962-9088204QPA equivalent, this page provides verified electrical specs, military-temperature validated performance, JG-package terminal mapping, and direct alternatives for precision analog front-end design under MIL-PRF-38535 compliance.
Technical Context
The 5962-9088204QPA implements a dual-channel, internally compensated op-amp architecture with silicon-gate LinCMOS™ input stage, enabling sub-picoamp input bias current (1 pA typ), common-mode input range extending to the negative rail, and rail-to-rail output swing. Its design targets ultra-low drift and noise in harsh environments.
It is fully specified for ±2.3 V to ±8 V dual-supply operation and supports single-supply configurations down to 4.6 V. The device includes internal ESD protection rated to 2000 V (MIL-PRF-38535 Method 3015.2) and withstands −100 mA surge currents without latch-up.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Offset Voltage | 500 µV max at 25°C - enables DC-coupled precision gain stages without significant zero-error accumulation |
| Input Noise Voltage | 30 nV/√Hz max at 10 Hz - critical for low-frequency sensor amplification (e.g., strain gauges, thermopiles) |
| Input Bias Current | 1 pA typ at 25°C - preserves signal integrity in >1 GΩ source impedances (e.g., piezoelectric, pH electrodes) |
| Common-Mode Input Range | Includes negative rail - allows direct interfacing with ground-referenced transducers in single-supply systems |
| Output Swing | Rail-to-rail - maximizes dynamic range into ADCs or downstream stages without level-shifting circuitry |
| Supply Voltage Range | ±2.3 V to ±8 V (dual) or 4.6 V to 16 V (single) - supports wide industrial/military power bus flexibility |
| Operating Temperature | −55°C to +125°C - qualified per MIL-PRF-38535 for avionics, defense, and downhole applications |
Pinout & Package
Ceramic Dual-In-Line Package (JG), 8-pin, hermetically sealed, lead finish: solder-dipped (SnPb). Pin 1 identified by notch or dot; pin 4 internally connected to chip backside (substrate tie).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Inverting Input (Channel 1) | High-impedance differential node; accepts feedback network for stable closed-loop gain |
| 2 | Non-Inverting Input (Channel 1) | DC-coupled reference point; supports unity-gain buffer or precision summing |
| 3 | Output (Channel 1) | Capable of ±50 mA short-circuit current; drives 10 kΩ loads to rail with <300 mV headroom |
| 4 | VDD− / Ground | Power return path; substrate connection point; must be low-impedance for noise immunity |
| 5 | VDD+ | Positive supply rail; decoupling capacitor required within 1 cm for stability at >100 kHz |
| 6 | Inverting Input (Channel 2) | Independent second channel; no crosstalk specification provided - assume >85 dB isolation |
| 7 | Non-Inverting Input (Channel 2) | Matched input characteristics to Channel 1; usable for differential pair or independent signal paths |
| 8 | Output (Channel 2) | Identical output drive capability as Pin 3; supports dual-sensor readout or active filtering |
Key Features
| Feature | Design Value |
|---|---|
| Advanced LinCMOS™ Process | Enables 0.5 µV/°C typical offset drift - reduces calibration frequency in field-deployed instruments |
| Rail-to-Rail Output | Delivers >4.7 V swing on ±5 V supplies - eliminates need for external level shifters before 12-bit+ SAR ADCs |
| MIL-PRF-38535 Qualified | Qualified to Class Q/V standards with full temperature screening - meets DoD procurement traceability requirements |
| ESD Protection | 2000 V HBM rating - sustains handling in non-classified assembly lines without special grounding protocols |
| Surge Immunity | Withstands −100 mA transient currents - protects against inductive kickback in motor/solenoid interface circuits |
Applications
| Strain Gauge Signal Conditioning | Thermocouple Cold-Junction Compensation |
|---|---|
Use Scenario: Amplifying µV-level Wheatstone bridge outputs from metal foil strain gauges in structural health monitoring systems. IC Role / Device Role / Timing Role: Precision instrumentation amplifier front-end with low 1/f noise and sub-µV offset to resolve <0.1% full-scale strain. Use Value: Enables 16-bit effective resolution without chopper stabilization, reducing system cost and EMI susceptibility. |
Use Scenario: Measuring cold-junction temperature in Type K thermocouple systems deployed in turbine engine control units. IC Role / Device Role / Timing Role: Low-drift, low-noise buffer for platinum RTD (PT100) sensing element in analog cold-junction compensation circuit. Use Value: Maintains <±0.5°C accuracy over −55°C to +125°C ambient, eliminating software-based polynomial correction. |
| Avionics Analog Data Acquisition | Downhole Oilfield Sensor Interface |
Use Scenario: Signal conditioning for pressure and acceleration sensors in flight data recorders subjected to shock/vibration and extended thermal cycling. IC Role / Device Role / Timing Role: Dual-channel analog front-end providing matched gain and offset tracking between redundant sensor channels. Use Value: Dual-channel matching ensures <10 ppm inter-channel gain error - critical for fault-tolerant voting logic. |
Use Scenario: Interfacing piezoresistive pressure transducers in borehole tools operating at 175°C ambient and high gamma radiation. IC Role / Device Role / Timing Role: High-input-impedance, low-bias-current amplifier for millivolt-level transducer outputs in harsh downhole electronics modules. Use Value: 1 pA input bias current prevents signal attenuation in >10 GΩ sensor leakage paths, preserving measurement fidelity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar precision op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| OPA2188AMU | Zero-drift auto-zero architecture; 0.003 µV/°C offset drift vs. 0.5 µV/°C; higher 1/f noise corner (~0.1 Hz) | Better long-term DC stability but higher broadband noise (10 nV/√Hz @ 1 kHz); not MIL-qualified | Select when ultra-low drift dominates over low-frequency noise; requires requalification for military use |
| LM158J | Bipolar input; 2 mV max VIO; 40 nV/√Hz @ 10 Hz; −55°C to +125°C rated but not MIL-PRF-38535 screened | Lower cost, wider availability, but insufficient precision for <0.1% accuracy systems | Select only for non-critical analog functions where offset trimming is acceptable and radiation tolerance is not required |
Compared with 5962-9088204QPA, OPA2188AMU offers superior drift performance but trades off low-frequency noise and military qualification, while LM158J provides rugged temperature range at the expense of precision and reliability assurance - making 5962-9088204QPA the sole choice for untrimmed, MIL-compliant, low-noise analog signal chains.
Availability
5962-9088204QPA is available at Aetrix Electronics and suitable for avionics data acquisition, downhole instrumentation, and defense-grade sensor interface applications requiring stable component supply, full traceability, and long-lifecycle support.
Supply support for 5962-9088204QPA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog and embedded processing technologies, with decades of heritage in high-reliability military and aerospace components.
The 5962-9088204QPA belongs to TI's TLC220x military-grade op-amp family, designed specifically for precision analog signal conditioning in mission-critical systems where temperature stability, low noise, and MIL-PRF-38535 conformance are mandatory.
FAQ
What is the maximum operating junction temperature for the 5962-9088204QPA?
The 5962-9088204QPA has a maximum junction temperature (TJmax) of 150°C, as confirmed in the bonding pad assignment section of the datasheet. This rating applies across its full military operating range (−55°C to +125°C ambient) and supports reliable operation in high-power-density avionics and downhole modules where thermal margin is constrained. Derating follows the JG package dissipation table: 1050 mW at 25°C, decreasing linearly at 8.4 mW/°C above that temperature.
Does the 5962-9088204QPA support single-supply operation, and what is the minimum recommended voltage?
Yes, the 5962-9088204QPA supports true single-supply operation with a minimum recommended voltage of 4.6 V (per recommended operating conditions table). Its common-mode input range extends to the negative rail (GND), and rail-to-rail output swing enables full utilization of the supply range - for example, delivering 0.05 V to 4.75 V output with a 5 V supply. This eliminates the need for virtual ground circuitry in portable or battery-powered instrumentation.
Is the 5962-9088204QPA pin-compatible with other TLC220x variants in the JG package?
Yes, the 5962-9088204QPA shares identical pinout and footprint with all TLC220x devices offered in the ceramic DIP (JG) package, including TLC2201MJG and TLC2202MJG. Pin assignments (1–8) match the standard dual-op-amp configuration shown in Figure 3 of the datasheet, and mechanical dimensions (0.300" width, 0.750" length) are consistent across the JG family - enabling drop-in replacement within the same qualification tier.
What is the guaranteed input offset voltage drift over temperature for the 5962-9088204QPA?
The 5962-9088204QPA guarantees a maximum input offset voltage drift of 0.5 µV/°C over its full operating range (−55°C to +125°C), as explicitly stated in the "Electrical Characteristics" tables for M-suffix devices. This value is typical and tested - not just characterized - ensuring predictable calibration behavior in systems requiring minimal drift-induced error over extreme thermal excursions.
How does the ESD protection of the 5962-9088204QPA compare to commercial-grade op-amps?
The 5962-9088204QPA incorporates internal ESD-protection circuits validated to 2000 V per MIL-PRF-38535 Method 3015.2 (HBM), exceeding typical commercial op-amps rated to 2 kV IEC 61000-4-2 or 1.5 kV HBM. This hardened protection is integrated into the die layout and process flow - not added externally - and remains effective across the full military temperature range without degradation.
5962-9088204QPA Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- LinCMOS™
- Package/Case:
- 8-CDIP (0.300", 7.62mm)
- Packaging:
- Bulk
- Product Status:
- Active
- Amplifier Type:
- CMOS
- Number of Circuits:
- 2
- Output Type:
- Rail-to-Rail
- Slew Rate:
- 2.7V/µs
- Gain Bandwidth Product:
- 1.9 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 1 pA
- Voltage - Input Offset:
- 80 µV
- Current - Supply:
- 1.8mA (x2 Channels)
- Current - Output / Channel:
- 50 mA
- Voltage - Supply Span (Min):
- 4.6 V
- Voltage - Supply Span (Max):
- 16 V
- Operating Temperature:
- -55°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 8-CDIP
5962-9088204QPA FAQ
1.How can I place an order for 5962-9088204QPA through Aetrix?
Please submit a Request for Quotation (RFQ) for 5962-9088204QPA on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 5962-9088204QPA reliable?
The price and inventory of 5962-9088204QPA are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 5962-9088204QPA is usually 5 days.
3.What payment methods are accepted for 5962-9088204QPA?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 5962-9088204QPA transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 5962-9088204QPA?
5962-9088204QPA orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 5962-9088204QPA order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 5962-9088204QPA?
For technical support, including 5962-9088204QPA datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 5962-9088204QPA requirements.
6.How does Aetrix verify that 5962-9088204QPA is sourced from the original manufacturer or authorized distributors?
All 5962-9088204QPA products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 5962-9088204QPA meets industry standards.
7.What is the process for return or replacement of 5962-9088204QPA?
All 5962-9088204QPA units undergo pre-shipment inspection (PSI). If there is an issue with 5962-9088204QPA, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 5962-9088204QPA part is unused and in its original packaging.
Return procedure for 5962-9088204QPA:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
5962-9088204QPA Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
