Analog Devices Inc. 5962-9306001MXA

Overview

5962-9306001MXA from Analog Devices is a military-grade, monolithic 12-bit, 10 MSPS analog-to-digital converter with integrated track-and-hold amplifier and internal 2.5 V reference, operating across –55°C to +125°C, used in radar front-ends and avionics data acquisition systems.

For engineers reviewing the 5962-9306001MXA datasheet, 5962-9306001MXA pinout, 5962-9306001MXA application, or 5962-9306001MXA equivalent, this page delivers verified electrical specs, D-28 package terminal mapping, thermal resistance (θ_JC = 28°C/W), SNR of 61 dB at 1 MHz input, and MIL-STD-883B-compliant reliability data - all confirmed against ADI's official SMD 5962-93060 Rev. B documentation.

Technical Context

The 5962-9306001MXA implements a pipelined ADC architecture with on-chip THA and correction logic to guarantee no missing codes across its full 12-bit range. It supports dual-supply operation (AVDD = +5 V, AVSS = –5 V) and separate digital supplies (DVDD = +5 V, DRVDD = +5 V), with strict ground isolation requirements (AGND–DGND ≤ ±1 V).

Timing is governed by a minimum 100 ns clock period (10 MSPS), 3-clock-cycle pipeline latency, and output enable (OEN) control for bus sharing. Input voltage range is ±1 V differential (VINA–VINB), with 50 kΩ input resistance and 10 pF capacitance - optimized for low-distortion sampling in high-speed instrumentation.

Key Specifications

Pinout & Package

5962-9306001MXA uses a hermetically sealed 28-pin side-brazed ceramic DIP (D-28, package designation CDIP2-T28), rated for high-reliability military applications. Thermal resistance θ_JC = 28°C/W supports conduction-cooled mounting.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar high-speed, radiation-tolerant ADC applications.

Compared with AD9220ARZ and ADS8364IPAG, the 5962-9306001MXA uniquely combines military temperature range, on-chip THA, internal reference, and guaranteed no-missing-codes behavior - making it irreplaceable for deployed radar and guidance electronics where deterministic performance under stress is non-negotiable.

Availability

5962-9306001MXA is available at Aetrix Electronics and suitable for radar signal digitization, avionics flight data acquisition, and electronic warfare receivers requiring stable component supply across extended temperature ranges and long production lifecycles.

Supply support for 5962-9306001MXA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Norwood, MA.

The 5962-9306001MXA belongs to ADI's military microcircuit technology group (93), designed specifically for defense and aerospace applications demanding guaranteed performance under extreme thermal, mechanical, and radiation stress.

FAQ

What is the absolute maximum clock frequency supported by the 5962-9306001MXA?

The 5962-9306001MXA has a minimum clock period of 100 ns, corresponding to a maximum sampling rate of 10 MSPS. This is a hard architectural limit defined by its pipelined ADC core and internal timing margins. Exceeding this rate causes metastability in the output registers and invalid data; the device does not support overclocking beyond 10 MSPS under any conditions, including room temperature or reduced supply voltages.

Does the 5962-9306001MXA require an external voltage reference?

No, the 5962-9306001MXA includes a fully integrated 2.5 V reference with ±0.04 V tolerance (2.46 V to 2.54 V) and low drift (±0.5% FSR over temperature when using external reference mode). The REF OUT pin provides a buffered output that can drive external circuitry, eliminating the need for discrete reference ICs in most configurations unless higher precision or programmability is required.

What is the meaning of "Type 01" in the 5962-9306001MXA part number?

"Type 01" designates the D-28 side-brazed ceramic DIP package (CDIP2-T28), as defined in SMD 5962-93060. It distinguishes this variant from Type 02 (E-44A LCC package). The 5962-9306001MXA is exclusively Type 01 - no functional or electrical differences exist between types beyond package form factor, thermal resistance, and pinout layout.

How is ground isolation implemented on the 5962-9306001MXA?

The 5962-9306001MXA separates analog (AGND) and digital (DGND, DRGND) grounds with strict voltage limits: AGND–DGND must remain within ±1 V, and DRGND–DGND within ±0.3 V. This isolation prevents digital switching noise from modulating the analog input path. Layout best practice requires star grounding at a single point near the device, with dedicated copper pours and minimal shared return paths.

Is the 5962-9306001MXA compliant with MIL-STD-883B?

Yes, the 5962-9306001MXA is fully qualified to MIL-STD-883B, including Method 1015B burn-in and Method 1005 steady-state life testing. Its qualification is documented in Analog Devices' SMD 5962-93060 Rev. B specification and verified through DESC-ELDS-reviewed test reports. This compliance ensures suitability for Class B (spacecraft) and Class S (airborne) applications per DoD requirements.