Renesas 5P49V6975A000LTGI
- Part No.:
- 5P49V6975A000LTGI
- Manufacturer:
- Renesas
- Package:
- 24-LFLGA Exposed Pad
- Datasheet:
-
5P49V6975A000LTGI.pdf
- Description:
- IC CLOCK GENERATOR 24LGA
- Quantity:
- Payment:

- Shipping:

Inventory:1,158
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
5P49V6975A000LTGI from Renesas Electronics is a VersaClock® 6E programmable clock generator with integrated 25MHz crystal, supporting up to four differential or single-ended outputs (LVPECL/LVDS/HCSL/LVCMOS), <0.5ps RMS phase jitter, and I²C programmability via dual addresses (0xD0/0xD4). It serves as a system timing hub in PCIe Gen4/Gen5 switch/router designs requiring low-jitter, multi-voltage, spread-spectrum-capable clock synthesis.
For engineers reviewing the 5P49V6975A000LTGI datasheet, 5P49V6975A000LTGI pinout, 5P49V6975A000LTGI application, or 5P49V6975A000LTGI equivalent, key selection criteria include its internal crystal elimination of external tuning, per-output spread spectrum control, 1.8V/2.5V/3.3V mixed I/O voltage support, and industrial temperature operation (-40°C to +85°C).
Technical Context
The 5P49V6975A000LTGI implements a high-performance fractional-N PLL with 2.5–2.9GHz VCO range, enabling precise any-frequency synthesis across its four independently configurable output pairs. Its architecture includes four banks of OTP memory for factory or in-system configuration, two hardware select pins (SEL0/SEL1) for mode selection, and an I²C interface supporting dual addresses to coexist with other devices on the same bus.
Each output pair supports independent spread-spectrum modulation (±0.1% to ±2.5%), programmable skew, and cascaded or individual FOD division. The device accepts differential (CLKIN/CLKINB) or internal crystal reference input, with manual switchover controlled by CLKSEL, and features dedicated VDDOx power rails per output bank to enable mixed-voltage signaling (e.g., LVDS at 1.8V, LVPECL at 3.3V).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output count & type | Four universal output pairs: each configurable as LVPECL/LVDS/HCSL differential or 2× LVCMOS single-ended |
| Phase jitter (RMS) | <0.5ps typical (12kHz–20MHz), enabling PCIe Gen5 and Fibre Channel compliance |
| Output frequency range | LVCMOS: 1kHz–200MHz; LVDS/LVPECL/HCSL: 1kHz–350MHz |
| Internal reference | Integrated 25MHz crystal with ±2ppm initial accuracy and ±20ppm temp stability |
| Power supply flexibility | VDDA/VDDD: 1.8V–3.3V; four independent VDDOx rails (1.8V/2.5V/3.3V selectable per output bank) |
| I²C interface | Dual address support (0xD0 or 0xD4), enabling multiple 5P49V6975A000LTGI devices on one bus |
| Operating temperature | -40°C to +85°C industrial grade, qualified for telecom line cards and MSAN systems |
Pinout & Package
Package: 4 × 4 mm, 24-pin LGA (Land Grid Array) with exposed thermal pad (EPAD), RoHS-compliant, moisture sensitivity level 3.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CLKIN / CLKINB | Differential reference input | Accepts external clock (1–350MHz); internal 100kΩ pull-down enables single-ended use |
| CLKSEL | Reference source selector | 0 = internal crystal (default); 1 = CLKIN/CLKINB; enables manual switchover |
| SD/OE | System disable/output enable | Active-low: OE mode disables outputs; SD mode powers down core (10mA standby) |
| SEL0/SCL & SEL1/SDA | I²C interface or config select | Mode determined by OUT0_SEL_I2CB latch: I²C (SCL/SDA) or hardware select (SEL0/SEL1) |
| VDDO0–VDDO4 | Output power rails | Five independent supplies: VDDO0 powers reference OUT0; VDDO1–VDDO4 power OUT1–OUT4 banks |
| OUT0–OUT4 / OUT1B–OUT4B | Programmable clock outputs | OUT0: fixed LVCMOS reference (5–200MHz); OUT1–OUT4: fully configurable differential/single-ended pairs |
| OUT0_SEL_I2CB | Configuration mode latch | Latched at power-up: pull-up → SEL0/SEL1 as GPIOs; pull-down/floating → SEL0/SEL1 as I²C SCL/SDA |
Key Features
| Feature | Design Value |
|---|---|
| Integrated 25MHz crystal | Eliminates external crystal, load caps, and board layout tuning-reduces BOM count and footprint |
| Per-output spread spectrum | Independent ±0.1% to ±2.5% center-spread or -0.2% to -5% down-spread on each output pair reduces EMI |
| Four OTP memory banks | Enables field reprogramming and storage of up to four distinct configurations (e.g., regional standards, test modes) |
| Mixed-voltage I/O support | VDDOx rails allow simultaneous 1.8V LVDS, 2.5V HCSL, and 3.3V LVPECL outputs without level shifters |
| PCIe Gen5-ready jitter | <0.5ps RMS phase jitter meets PCIe Gen5 common-clock architecture requirements (tjphPCIeG5-CC) |
Applications
| PCI Express Switch Timing | Ethernet Router Clocking |
|---|---|
|
Use Scenario: High-density 10GbE/25GbE router with multiple SerDes lanes requiring synchronized, low-jitter clocks for MAC, PHY, and packet processor subsystems. IC Role / Device Role / Timing Role: Primary clock synthesizer generating PCIe Gen4/Gen5 reference clocks (100MHz, 125MHz, 156.25MHz) and Ethernet PHY clocks (25MHz, 125MHz, 156.25MHz) with independent spread spectrum. Use Value: Integrated crystal and per-output SSC eliminate discrete oscillators and reduce EMI across multiple high-speed interfaces without compromising jitter margin. |
Use Scenario: Carrier-grade Ethernet aggregation switch supporting IEEE 1588 PTP timing, SFP+ modules, and CPU/FPGA interfaces. IC Role / Device Role / Timing Role: System timing hub providing synchronous 25MHz, 125MHz, and 156.25MHz clocks to switch fabric ASIC, management CPU, and optical transceivers. Use Value: Four independent output banks with mixed 1.8V/2.5V/3.3V I/O support enable direct connection to diverse SerDes receivers without external level translation. |
| Fibre Channel SAN Controller | Broadcast Video Timing |
|
Use Scenario: Fibre Channel HBAs and storage controllers requiring ultra-low-jitter 266.67MHz or 1.066GHz (via divider) clocks compliant with FC-PI-6 spec. IC Role / Device Role / Timing Role: Precision clock generator delivering sub-0.5ps RMS jitter LVDS outputs for FC-PI-6 serial links and FPGA-based protocol engines. Use Value: Measured 0.5ps RMS jitter at 156.25MHz and 350MHz differential outputs ensures deterministic bit error rate in 32GFC and 64GFC applications. |
Use Scenario: Professional broadcast camera head or video processing unit needing SMPTE ST 2059-2 PTP-synchronized 27MHz, 74.25MHz, and 148.5MHz pixel clocks. IC Role / Device Role / Timing Role: Multi-format clock source generating exact broadcast frequencies with <±20ppm stability over -40°C to +85°C ambient. Use Value: Internal crystal with ±2ppm initial accuracy and ±50ppm 10-year aging guarantee eliminates drift-induced frame sync errors in field-deployed equipment. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar programmable clock generator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Si5341-B-GM | Higher channel count (12 outputs), integrated jitter cleaner, no internal crystal; requires external XO | Better suited for ultra-low-jitter (<0.2ps) telecom synchronization; lacks integrated crystal simplification | Select when system-level jitter cleaning and >4 outputs are required; avoid if BOM reduction via internal crystal is critical |
| ICS8430I-01T | Fixed-function 4-output LVDS clock generator; no I²C, no spread spectrum, no internal crystal | Lower cost for static clock trees where frequency agility and EMI reduction are not needed | Select only for cost-sensitive, non-programmable applications with fixed 100/125MHz LVDS outputs |
Compared with Si5341-B-GM and ICS8430I-01T, the 5P49V6975A000LTGI uniquely balances integration (internal crystal), programmability (I²C + OTP), and EMI control (per-output SSC) in a compact 4×4mm package-making it optimal for space-constrained, multi-standard systems like PCIe 5.0 switches and carrier Ethernet routers.
Availability
5P49V6975A000LTGI is available at Aetrix Electronics and suitable for PCIe Gen5 switch timing, Fibre Channel SAN controllers, and broadcast video synchronizers requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for 5P49V6975A000LTGI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader specializing in microcontrollers, analog, power, and timing solutions for automotive, industrial, and infrastructure markets.
The 5P49V6975A000LTGI belongs to the VersaClock® 6E family-designed specifically for high-performance, multi-protocol timing in next-generation datacom and computing platforms where integration, flexibility, and jitter performance are critical.
FAQ
What is the function of the OUT0_SEL_I2CB pin on the 5P49V6975A000LTGI?
The OUT0_SEL_I2CB pin on the 5P49V6975A000LTGI latches its voltage state at power-up to configure the function of pins 8 and 9. A weak pull-up (10kΩ) sets them as hardware select pins (SEL1/SEL0); a weak pull-down or floating condition configures them as I²C SDA/SCL. After boot, this pin becomes an LVCMOS reference output (OUT0). This dual-mode design allows flexible system integration without redesigning the PCB layout for different configuration methods.
Does the 5P49V6975A000LTGI support PCIe Gen5 timing requirements?
Yes, the 5P49V6975A000LTGI supports PCIe Gen5 timing requirements through its <0.5ps RMS phase jitter (12kHz–20MHz), measured with 25MHz crystal input and configured outputs including 156.25MHz LVDS. Its fractional-N PLL architecture, 2.5–2.9GHz VCO range, and per-output spread spectrum modulation ensure compliance with PCIe Gen5 common-clock architecture jitter limits (tjphPCIeG5-CC), making it suitable for root complex and endpoint timing in Gen5 switches and accelerators.
Can the 5P49V6975A000LTGI generate both LVDS and LVPECL outputs simultaneously?
Yes, the 5P49V6975A000LTGI can generate LVDS and LVPECL outputs simultaneously. Each of its four output pairs (OUT1–OUT4) is independently configurable for LVPECL, LVDS, HCSL, or LVCMOS. Separate VDDOx power rails (e.g., VDDO2 = 2.5V for LVDS, VDDO3 = 3.3V for LVPECL) enable concurrent operation at different voltage levels and signal standards-eliminating need for external level translators in mixed-interface systems such as multi-protocol network processors.
What is the maximum output frequency supported by the 5P49V6975A000LTGI for LVCMOS signals?
The 5P49V6975A000LTGI supports LVCMOS output frequencies up to 200MHz, verified across all supported VDDOx supply voltages (1.8V, 2.5V, 3.3V). At 200MHz, typical current consumption is 43–56mA (3.3V), 33–43mA (2.5V), or 24–31mA (1.8V). The device maintains guaranteed duty cycle (40–60% at 1.8V, 45–55% at 2.5V/3.3V) and slew rate control (up to 2.7V/ns) across this full range, ensuring robust timing margins in high-speed microcontroller and FPGA clocking applications.
How does the internal crystal in the 5P49V6975A000LTGI improve system design?
The internal 25MHz crystal in the 5P49V6975A000LTGI eliminates external crystal components, load capacitors, and associated PCB layout tuning-reducing BOM count by up to 4 parts, saving ~3mm² board area, and removing crystal-related startup variability. With ±2ppm initial accuracy and ±20ppm temperature stability, it delivers consistent timing performance across industrial environments without requiring external calibration or compensation circuits, accelerating time-to-market for PCIe, Ethernet, and broadcast video platforms.
5P49V6975A000LTGI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- VersaClock® 6E
- Package/Case:
- 24-LFLGA Exposed Pad
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Type:
- Clock Generator
- PLL:
- Yes with Bypass
- Input:
- HCSL, LVCMOS, LVDS, LVPECL, Crystal
- Output:
- HCSL, LVCMOS, LVDS, LVPECL
- Number of Circuits:
- 1
- Ratio - Input:Output:
- 2:4
- Differential - Input:Output:
- Yes/Yes
- Frequency - Max:
- 350MHz
- Divider/Multiplier:
- Yes/No
- Voltage - Supply:
- 1.71V ~ 3.465V
- Operating Temperature:
- -40°C ~ 85°C
- Mounting Type:
- Surface Mount
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- 24-LGA (4x4)
5P49V6975A000LTGI FAQ
1.How can I place an order for 5P49V6975A000LTGI through Aetrix?
Please submit a Request for Quotation (RFQ) for 5P49V6975A000LTGI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 5P49V6975A000LTGI reliable?
The price and inventory of 5P49V6975A000LTGI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 5P49V6975A000LTGI is usually 5 days.
3.What payment methods are accepted for 5P49V6975A000LTGI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 5P49V6975A000LTGI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 5P49V6975A000LTGI?
5P49V6975A000LTGI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 5P49V6975A000LTGI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 5P49V6975A000LTGI?
For technical support, including 5P49V6975A000LTGI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 5P49V6975A000LTGI requirements.
6.How does Aetrix verify that 5P49V6975A000LTGI is sourced from the original manufacturer or authorized distributors?
All 5P49V6975A000LTGI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 5P49V6975A000LTGI meets industry standards.
7.What is the process for return or replacement of 5P49V6975A000LTGI?
All 5P49V6975A000LTGI units undergo pre-shipment inspection (PSI). If there is an issue with 5P49V6975A000LTGI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 5P49V6975A000LTGI part is unused and in its original packaging.
Return procedure for 5P49V6975A000LTGI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
5P49V6975A000LTGI Tags
-
CD74HCT4046AM96
Texas Instruments

-
MC14046BDWR2G
onsemi

-
501MILFT
Renesas
-
CD74HC7046AM
Texas Instruments
-
CDCVF2505PWR
Texas Instruments

-
RC19004A100GNL#KB0
Renesas
-
SI5351A-B-GTR
Skyworks Solutions Inc.

-
CY2305SXI-1T
Infineon Technologies

-
570BILFT
Renesas

-
CDCE913PWR
Texas Instruments

-
CY2305SXI-1HT
Infineon Technologies

-
DS1086LU+T
Analog Devices Inc./Maxim Integrated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

