My Inquiry
My Account
Renesas 6116SA25SOGI8
- Part No.:
- 6116SA25SOGI8
- Manufacturer:
- Renesas
- Category:
- Memory
- Package:
- 24-SOIC (0.295", 7.50mm Width)
- Datasheet:
-
6116SA25SOGI8.pdf
- Description:
- IC SRAM 16KBIT PARALLEL 24SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,375
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
6116SA25SOGI8 from Renesas Electronics is a 16K-bit (2K × 8) high-speed CMOS static RAM with 25ns maximum access time, industrial temperature range (–40°C to +85°C), TTL-compatible I/O, and 24-pin SOIC packaging. It operates at 5.0V ±10%, supports standby power mode via chip select, and is used in embedded controllers, instrumentation, and legacy industrial systems requiring non-refreshed memory.
For engineers reviewing the 6116SA25SOGI8 datasheet, 6116SA25SOGI8 pinout, 6116SA25SOGI8 application, or 6116SA25SOGI8 equivalent, key selection criteria include guaranteed 25ns read cycle time, industrial-grade reliability, SOIC-24 footprint compatibility, low standby current (2mA typical), and direct TTL-level interfacing without level-shifting.
Technical Context
This device implements fully static asynchronous operation-no clocks or refresh cycles required-and uses CMOS technology to eliminate alpha-particle soft errors. Its control logic relies on three active-low signals: CS (chip select), WE (write enable), and OE (output enable), enabling precise read/write timing control across multiple access modes including read, write, and high-impedance standby.
The memory array is organized as 128 × 128 bits with integrated address decoder and I/O control circuitry. Input leakage current is ≤5µA (industrial grade), output drive capability is ±4mA/±8mA, and data retention voltage is not applicable (LA version only), confirming this is the standard-power SA variant.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Size | 16,384 bits (2K × 8), supporting byte-wide data bus interfaces without external multiplexing. |
| Access Time | 25ns max (industrial temp), defining minimum time between address valid and stable data output during read cycles. |
| Supply Voltage | 5.0V ±10% (4.5V–5.5V), compatible with legacy 5V TTL logic families and eliminating need for voltage regulators. |
| Operating Temperature | –40°C to +85°C, validated for use in industrial control panels, motor drives, and factory automation equipment. |
| Standby Current | 2mA max (ISB1, CMOS-level CS), enabling significant system-level power savings when deselected. |
| I/O Compatibility | TTL-compatible inputs and outputs, allowing direct connection to 74LS/74HC logic without interface buffers. |
| Package | 24-pin SOIC (PSG24), gull-wing lead form with 0.600-inch width, suitable for automated PCB assembly and space-constrained layouts. |
Pinout & Package
6116SA25SOGI8 is housed in a 24-pin Small Outline Integrated Circuit (SOIC) package with gull-wing leads (package code PSG24), 0.600-inch body width, and JEDEC MS-012AC compliant dimensions.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A10 | Address Inputs | 11-bit address bus accepting binary values to select one of 2048 memory locations. |
| I/O0–I/O7 | Bi-directional Data Bus | 8-bit parallel interface handling both read data output and write data input under OE/WE control. |
| CS | Chip Select | Active-low enable that places device in standby (high-Z I/O) when deasserted, reducing system power. |
| WE | Write Enable | Active-low signal initiating write cycle; combined with CS LOW to latch data into selected location. |
| OE | Output Enable | Active-low control for read operations; enables output drivers only when CS and OE are both LOW. |
| VCC | Power Supply | +5V supply pin requiring local 0.1µF ceramic decoupling to suppress switching noise. |
| GND | Ground Reference | Signal and power ground return path; must be connected to low-impedance system ground plane. |
Key Features
| Feature | Design Value |
|---|---|
| Static Operation | No clock or refresh circuitry required-simplifies system design and eliminates dynamic power overhead and timing constraints. |
| TTL Compatibility | Direct interface with standard 5V TTL logic families avoids level-shifter components and reduces BOM count. |
| Low Standby Power | 2mA max ISB1 current at CMOS-level CS deassertion enables energy-efficient idle states in battery-backed or fanless systems. |
| Industrial Temp Rating | Validated operation from –40°C to +85°C ensures reliability in harsh environments like factory floors and outdoor enclosures. |
| Soft-Error Immunity | CMOS process minimizes alpha-particle-induced bit flips-critical for long-term data integrity in unattended systems. |
Applications
| Industrial PLC Memory Buffer | Legacy Instrumentation Data Storage |
|---|---|
Use Scenario: Storing real-time sensor readings and configuration parameters in programmable logic controllers deployed in manufacturing lines. IC Role / Device Role / Timing Role: Non-volatile buffer holding intermediate process data between scan cycles; accessed asynchronously by microcontroller via parallel bus. Use Value: 25ns access time enables fast I/O scanning rates; industrial temperature rating ensures uptime in hot, dusty cabinet environments. | Use Scenario: Capturing calibration coefficients and measurement history in handheld multimeters and oscilloscope front-ends. IC Role / Device Role / Timing Role: Static RAM providing fast, deterministic read/write access for firmware-managed parameter tables and waveform buffers. Use Value: TTL compatibility allows direct connection to legacy MCU buses; low standby current extends battery life during sleep modes. |
| Avionics Test Equipment Cache | Medical Diagnostic Device FIFO |
Use Scenario: Serving as temporary storage for test pattern generation and response capture in airborne avionics BIT (Built-In Test) systems. IC Role / Device Role / Timing Role: High-reliability SRAM storing stimulus vectors and expected results during self-test sequences. Use Value: CMOS soft-error immunity prevents spurious faults during high-altitude operation; SOIC-24 package supports conformal coating for moisture resistance. | Use Scenario: Holding digitized ECG or EEG samples prior to DSP processing in portable patient monitors. IC Role / Device Role / Timing Role: Byte-accessible buffer managing streaming analog-to-digital data with minimal latency and no refresh jitter. Use Value: 2K × 8 organization matches common ADC word widths; 25ns timing supports sampling rates up to 40 MSPS in burst mode. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar static RAM applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AS6C1008-25ZIN | 25ns access, 2K × 8, 5V, SOIC-24, but rated –40°C to +85°C with 3mA ISB1 vs. 2mA for 6116SA25SOGI8. | Same industrial temperature and package; slightly higher standby current may impact ultra-low-power designs. | Select if AS6C1008-25ZIN offers better distributor availability or longer production lifecycle. |
| IS61LV25616AL-25MLI | 25ns, 256K × 16, 3.3V-only, TSSOP-44-larger density, different voltage, incompatible pinout and bus width. | Not drop-in; requires PCB redesign, level translation, and firmware adaptation for 16-bit wide access. | Choose only when migrating to higher-density, lower-voltage architecture with full system redesign. |
Compared with AS6C1008-25ZIN, 6116SA25SOGI8 offers lower standby current and proven field reliability in legacy 5V systems; versus IS61LV25616AL-25MLI, it provides true pin-compatible replacement for existing 2K × 8, 5V designs without layout or voltage rail changes.
Availability
6116SA25SOGI8 is available at Aetrix Electronics and suitable for industrial control systems, legacy instrumentation, avionics test equipment, and medical diagnostic devices requiring stable component supply and long-term obsolescence management.
Supply support for 6116SA25SOGI8 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader delivering microcontrollers, analog, power, and SoC solutions for automotive, industrial, and enterprise applications.
The 6116SA/LA family was designed for cost-sensitive, high-reliability embedded systems needing simple, robust, non-refreshed memory-targeting industrial automation, test equipment, and legacy computing platforms.
FAQ
What is the maximum operating frequency supported by the 6116SA25SOGI8?
The 6116SA25SOGI8 does not operate on a clock; it is an asynchronous SRAM. Its 25ns access time corresponds to a maximum effective cycle rate of ~40 MHz in read-only continuous addressing, but actual system throughput depends on bus protocol, CS/OE/WE timing margins, and controller interface design. The device guarantees tRC (read cycle time) ≤25ns across the full industrial temperature range.
Does the 6116SA25SOGI8 support battery backup operation?
No, the 6116SA25SOGI8 is the standard-power SA variant and does not support battery backup data retention. Battery backup capability (2V VDR, µW-level retention current) is exclusive to LA-series parts such as 6116LA25SOGI8. Using 6116SA25SOGI8 in battery-retention circuits will result in data loss below VCC = 4.5V.
Is the 6116SA25SOGI8 pin-compatible with other 24-pin SOIC SRAMs like the HM6116 or CY62167?
No-while all are 2K × 8 SRAMs in 24-pin SOIC, pinouts differ significantly. The 6116SA25SOGI8 follows the industry-standard 6116 pinout (A0–A10, I/O0–I/O7, CS, WE, OE, VCC, GND), whereas HM6116 uses different pin assignments for WE/OE, and CY62167 is a 32K × 8 device with incompatible address/data mapping. Always verify pinout against the 6116SA25SOGI8 datasheet before substitution.
What is the meaning of 'SOGI8' in the part number 6116SA25SOGI8?
In 6116SA25SOGI8, 'SO' denotes Small Outline package, 'G' indicates gull-wing leads, 'I' specifies Industrial temperature grade (–40°C to +85°C), and '8' signifies tape-and-reel packaging (8mm carrier tape, 2000 units per reel). This distinguishes it from tube-packaged variants like 6116SA25SOGI.
Can the 6116SA25SOGI8 be used in new designs given its legacy status?
Yes-the 6116SA25SOGI8 remains actively manufactured and supported by Renesas for legacy system maintenance and long-lifecycle industrial applications. While newer low-voltage or higher-density alternatives exist, 6116SA25SOGI8 is appropriate for designs requiring 5V TTL compatibility, proven reliability, and unchanged PCB footprints. Aetrix Electronics provides full lifecycle coordination for sustained supply.
6116SA25SOGI8 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- 24-SOIC (0.295", 7.50mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Volatile
- Memory Format:
- SRAM
- Technology:
- SRAM - Asynchronous
- Memory Size:
- 16Kbit
- Memory Organization:
- 2K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 25ns
- Access Time:
- 25 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-SOIC
6116SA25SOGI8 FAQ
1.How can I place an order for 6116SA25SOGI8 through Aetrix?
Please submit a Request for Quotation (RFQ) for 6116SA25SOGI8 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 6116SA25SOGI8 reliable?
The price and inventory of 6116SA25SOGI8 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 6116SA25SOGI8 is usually 5 days.
3.What payment methods are accepted for 6116SA25SOGI8?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 6116SA25SOGI8 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 6116SA25SOGI8?
6116SA25SOGI8 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 6116SA25SOGI8 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 6116SA25SOGI8?
For technical support, including 6116SA25SOGI8 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 6116SA25SOGI8 requirements.
6.How does Aetrix verify that 6116SA25SOGI8 is sourced from the original manufacturer or authorized distributors?
All 6116SA25SOGI8 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 6116SA25SOGI8 meets industry standards.
7.What is the process for return or replacement of 6116SA25SOGI8?
All 6116SA25SOGI8 units undergo pre-shipment inspection (PSI). If there is an issue with 6116SA25SOGI8, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 6116SA25SOGI8 part is unused and in its original packaging.
Return procedure for 6116SA25SOGI8:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
6116SA25SOGI8 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
