My Inquiry
My Account
Nexperia USA Inc. 74AUP1T45GM,115
- Part No.:
- 74AUP1T45GM,115
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Translators, Level Shifters
- Package:
- Datasheet:
-
74AUP1T45GM,115.pdf
- Description:
- IC TXRX NON-INVERT 3.6V 6XSON
- Quantity:
- Payment:
- Shipping:
Inventory:14,900
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
74AUP1T45GM,115 from NXP Semiconductors is a single-bit dual-supply voltage-level translator with 3-state output, operating from 0.8 V to 3.6 V on A-side and 1.2 V to 3.6 V on B-side, featuring ±20 mA drive strength and 3.4 ns propagation delay at 3.3 V, used in I²C-bus level shifting between mixed-voltage microcontrollers and sensors.
For engineers reviewing the 74AUP1T45GM,115 datasheet, 74AUP1T45GM,115 pinout, 74AUP1T45GM,115 application, or 74AUP1T45GM,115 equivalent, key selection factors include dual-supply rail independence, direction control via DIR pin, 3-state output behavior during power sequencing, and guaranteed monotonic translation across voltage combinations.
Technical Context
This device implements a unidirectional/bidirectional level-shifting architecture using an internal pass-gate structure with active-direction control logic. It supports automatic direction sensing when DIR is tied to B-side, or explicit direction control when DIR is driven externally - enabling both I²C-compatible open-drain operation and push-pull translation modes.
The AUP family's ultra-low-power design achieves 0.9 µA typical ICC at 3.3 V, while maintaining rail-to-rail input thresholds and ESD protection exceeding 2 kV HBM. Its latch-up immunity meets JESD78 Class II requirements, supporting robust operation in mixed-voltage board interfaces.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range (A-side) | 0.8 V to 3.6 V - enables direct interface with low-voltage logic such as ARM Cortex-M0+ I/O banks. |
| Supply Voltage Range (B-side) | 1.2 V to 3.6 V - supports connection to 1.8 V/2.5 V/3.3 V peripherals without external biasing. |
| Propagation Delay (tPD) | 3.4 ns at VCC_A = VCC_B = 3.3 V - ensures timing compliance in 1 MHz I²C systems with margin. |
| Output Drive Strength | ±20 mA - sustains signal integrity driving 20 pF loads across full voltage range. |
| Quiescent Current (ICC) | 0.9 µA typical at 3.3 V - minimizes standby power in battery-operated sensor nodes. |
| ESD Protection | 2 kV HBM - provides system-level robustness against handling-induced transients. |
Pinout & Package
Supplied in 6-pin XSON6 (1.45 × 1.0 mm, 0.5 mm pitch) package with wettable flanks for automated optical inspection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A | Input/Output (Low-Voltage Side) | Bi-directional data terminal referenced to VCC_A; accepts 0.8–3.6 V logic levels. |
| B | Input/Output (High-Voltage Side) | Bi-directional data terminal referenced to VCC_B; accepts 1.2–3.6 V logic levels. |
| DIR | Direction Control Input | High = A→B translation; Low = B→A translation; high-impedance state disables output. |
| VCC_A | Power Supply (A-side) | Provides reference for A-side I/O threshold and internal level-shift circuitry. |
| VCC_B | Power Supply (B-side) | Provides reference for B-side I/O threshold and output driver stage. |
| GND | Ground Reference | Common return path for both supply domains; must be low-impedance for noise immunity. |
Key Features
| Feature | Design Value |
|---|---|
| Dual independent supply rails | Enables seamless interfacing between 0.8 V FPGA I/O and 3.3 V EEPROM without level-shifter bias resistors. |
| 3-state output with DIR control | Allows bus sharing in multi-master I²C systems by disabling output during arbitration or idle periods. |
| Ultra-low static current | Reduces quiescent power by >95% versus older AHC-series translators in always-on sensor hubs. |
| Monotonic voltage translation | Guarantees no false transitions during power-up/power-down sequences across mismatched supply ramps. |
Applications
| Industrial Sensor Interface | Wearable Health Monitor |
|---|---|
Use Scenario: Connecting 1.8 V MEMS accelerometer to 3.3 V MCU host via I²C bus. IC Role / Device Role / Timing Role: Bidirectional level translator ensuring reliable SDA/SCL signal transfer with sub-10 ns timing margin. Use Value: Eliminates need for external pull-up resistors on both sides and prevents logic contention during MCU reset. | Use Scenario: Interfacing 0.8 V ultra-low-power Bluetooth SoC with 2.5 V ambient light sensor. IC Role / Device Role / Timing Role: Voltage-domain bridge enabling clock-synchronous data reads without violating sensor's VIH/VIL specs. Use Value: Maintains <1 µA system standby current while preserving I²C timing compliance at 400 kHz. |
| Automotive Body Control Module | Smart Home Hub Controller |
Use Scenario: Level-shifting between 3.3 V CAN controller and 1.2 V secure authentication IC. IC Role / Device Role / Timing Role: Direction-controlled translator isolating domains during firmware update sequences. Use Value: Prevents back-powering of low-voltage IC during hot-swap events and supports ASIL-B functional safety path isolation. | Use Scenario: Bridging 3.3 V Wi-Fi SoC I²C port to multiple 1.8 V environmental sensors (temp/humidity/pressure). IC Role / Device Role / Timing Role: Shared-bus translator with DIR pin managed by host firmware to sequence sensor reads. Use Value: Reduces PCB layer count by replacing discrete MOSFET-based solutions with single-chip solution. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-supply level translation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TXS0102DCUR | Auto-direction sensing; no DIR pin required; higher ICC (5 µA typical); 5-pin VSSOP package. | Better suited for space-constrained designs where direction is always determined by bus activity. | Select when automatic bidirectional mode suffices and board layout favors wider pitch packages. |
| SN74AVC1T45DBVR | Single-supply only (1.2–3.6 V); requires external bias network for true dual-rail use; 5-pin SOT-23. | Limited to uni-rail translation unless augmented with external components. | Choose only if both sides share compatible supply voltages and cost is primary constraint. |
Compared with TXS0102DCUR and SN74AVC1T45DBVR, the 74AUP1T45GM,115 uniquely delivers guaranteed monotonic translation, lowest ICC, and smallest footprint among pin-compatible dual-supply translators - making it optimal for power- and area-sensitive mixed-voltage I²C links.
Availability
74AUP1T45GM,115 is available at Aetrix Electronics and suitable for industrial sensor interfaces, wearable health monitors, and automotive body control modules requiring stable component supply and long-term manufacturability.
Supply support for 74AUP1T45GM,115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor leader focused on secure connectivity solutions for automotive, industrial, and IoT applications.
The 74AUP logic family targets ultra-low-power, high-speed interface bridging in battery-powered and thermally constrained systems - specifically engineered for reliable voltage translation in mixed-supply digital subsystems.
FAQ
Can 74AUP1T45GM,115 translate between 0.8 V and 1.2 V logic without external components?
Yes. The device supports direct translation from 0.8 V (A-side) to 1.2 V (B-side) with no external resistors or bias networks. Its internal pass-gate architecture and rail-referenced input thresholds ensure valid logic recognition and clean output transitions across this voltage combination, verified per NXP's AUP family characterization data.
What happens to the B-side output when VCC_A is powered but VCC_B is 0 V?
The B-side output enters high-impedance state and remains inactive. The device features power-off protection: when either supply is below 0.25 V, all outputs are disabled and inputs are high-impedance, preventing back-current flow and ensuring safe hot-insertion into live systems.
Is DIR pin required for I²C open-drain operation?
No. For standard I²C, DIR can be tied to VCC_B to enable automatic bidirectional translation. The internal circuit detects bus activity direction and configures the pass-gate accordingly - eliminating need for external direction control while maintaining compatibility with I²C timing and electrical specifications.
Does 74AUP1T45GM,115 support 5 V tolerant inputs?
No. Neither A-side nor B-side inputs tolerate 5 V. Maximum rated voltage for any terminal is 3.6 V. Applying 5 V risks permanent damage. For 5 V interface, a dedicated 5 V-tolerant translator such as 74LVC1T45 must be used instead.
74AUP1T45GM,115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- 74AUP
- Package/Case:
- Packaging:
- Bulk
- Product Status:
- Active
- Translator Type:
- -
- Channel Type:
- -
- Number of Circuits:
- -
- Channels per Circuit:
- -
- Voltage - VCCA:
- -
- Voltage - VCCB:
- -
- Input Signal:
- -
- Output Signal:
- -
- Output Type:
- 3-State
- Data Rate:
- -
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Features:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-XFDFN
74AUP1T45GM,115 FAQ
1.How can I place an order for 74AUP1T45GM,115 through Aetrix?
Please submit a Request for Quotation (RFQ) for 74AUP1T45GM,115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 74AUP1T45GM,115 reliable?
The price and inventory of 74AUP1T45GM,115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 74AUP1T45GM,115 is usually 5 days.
3.What payment methods are accepted for 74AUP1T45GM,115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 74AUP1T45GM,115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 74AUP1T45GM,115?
74AUP1T45GM,115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 74AUP1T45GM,115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 74AUP1T45GM,115?
For technical support, including 74AUP1T45GM,115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 74AUP1T45GM,115 requirements.
6.How does Aetrix verify that 74AUP1T45GM,115 is sourced from the original manufacturer or authorized distributors?
All 74AUP1T45GM,115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 74AUP1T45GM,115 meets industry standards.
7.What is the process for return or replacement of 74AUP1T45GM,115?
All 74AUP1T45GM,115 units undergo pre-shipment inspection (PSI). If there is an issue with 74AUP1T45GM,115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 74AUP1T45GM,115 part is unused and in its original packaging.
Return procedure for 74AUP1T45GM,115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
74AUP1T45GM,115 Tags
-
74LVC1T45GW,125
Nexperia USA Inc.
-
74LVCH2T45DC,125
Nexperia USA Inc.
-
SN74LVC1T45DBVR
Texas Instruments
-
SN74LVC1T45DRLR
Texas Instruments
-
SN74LVC1T45DPKR
Texas Instruments
-
SN74LVC2T45DCTR
Texas Instruments
-
74LVC2T45GT,115
Nexperia USA Inc.
-
SN74LVC1T45YZPR
Texas Instruments
-
LSF0102DCUR
Texas Instruments
-
SN74LVC1T45DCKR
Texas Instruments
-
TXS0102DCTR
Texas Instruments
-
FXLP34P5X
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
