My Inquiry
My Account
Nexperia USA Inc. 74AVC16374DGG-Q10J
- Part No.:
- 74AVC16374DGG-Q10J
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Flip Flops
- Package:
- 48-TFSOP (0.240", 6.10mm Width)
- Datasheet:
-
74AVC16374DGG-Q10J.pdf
- Description:
- IC FF D-TYPE DUAL 8BIT 48TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,314
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
74AVC16374DGG-Q10J from Nexperia is an automotive-qualified 16-bit edge-triggered D-type flip-flop with dual 8-bit sections, 3-state outputs, 1.2 V to 3.6 V supply operation, and Dynamic Controlled Output (DCO) circuitry for noise reduction. It serves as a bus-oriented data latch in automotive infotainment backplanes and ADAS sensor interface timing paths.
For engineers reviewing the 74AVC16374DGG-Q10J datasheet, 74AVC16374DGG-Q10J pinout, 74AVC16374DGG-Q10J application, or 74AVC16374DGG-Q10J equivalent, this page delivers verified AEC-Q100 Grade 3 timing behavior, TSSOP48 pin mapping, propagation delay down to 0.7 ns at 3.3 V, and live insertion support via nOE pull-up.
Technical Context
This device implements two independent 8-bit D-type flip-flop sections, each with dedicated clock (nCP) and active-low output enable (nOE). Its CMOS architecture supports voltage translation across 1.2 V–3.6 V rails while maintaining 3.6 V I/O tolerance.
The integrated Dynamic Controlled Output (DCO) circuit dynamically adjusts output impedance during signal transitions to suppress ringing without degrading propagation speed. Low-inductance multiple VCC/GND pins minimize ground bounce in high-speed automotive buses.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | 1.2 V to 3.6 V - Enables interoperability across mixed-voltage automotive subsystems (e.g., 1.8 V MCU interfacing with 3.3 V CAN transceivers). |
| Propagation Delay (tpd) | 0.7 ns (min) at VCC = 3.0–3.6 V - Supports >350 MHz operation in high-speed data capture paths. |
| Output Enable Time (ten) | 0.7 ns (typ) at VCC = 3.0–3.6 V - Ensures fast bus arbitration response in multiplexed memory or peripheral interfaces. |
| Input/Output Tolerance | 3.6 V - Allows safe connection to higher-voltage logic without level shifters in legacy automotive modules. |
| AEC-Q100 Grade | Grade 3 (−40 °C to +85 °C) - Qualified for under-hood and cabin electronics where thermal cycling and long-term reliability are critical. |
| ESD Protection | HBM >1000 V - Provides robustness against handling and assembly ESD events in automotive manufacturing environments. |
| Dynamic Power Dissipation | CPD = 66 pF (outputs enabled) - Enables accurate dynamic power estimation for thermal design in space-constrained ECUs. |
Pinout & Package
Package: TSSOP48 (SOT362-1), plastic thin shrink small outline package, 48 leads, body width 6.1 mm.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1CP, 2CP | Clock input (per 8-bit section) | LOW-to-HIGH edge triggers synchronous latching of corresponding D inputs; separate clocks allow staggered or independent section control. |
| 1OE, 2OE | Active-low output enable | Drives associated Q outputs into high-impedance state when HIGH; requires external pull-up to VCC for live insertion safety. |
| 1D0–1D7, 2D0–2D7 | Data inputs | Asynchronous inputs sampled on clock edge; tolerant up to 3.6 V regardless of VCC level. |
| 1Q0–1Q7, 2Q0–2Q7 | 3-state outputs | Driven HIGH/LOW or tri-stated based on nOE; DCO circuitry reduces overshoot/ringing on transmission lines. |
| VCC (pins 7, 18, 31, 42) | Power supply | Multiple distributed VCC pins reduce supply inductance and improve noise immunity in high-frequency switching. |
| GND (pins 4, 10, 15, 21, 28, 34, 39, 45) | Ground reference | Eight GND pins provide low-impedance return paths, minimizing ground bounce in 16-bit parallel bus applications. |
Key Features
| Feature | Design Value |
|---|---|
| Dynamic Controlled Output (DCO) | Real-time output impedance adjustment during transitions suppresses signal reflections without increasing tpd. |
| Live Insertion Support | nOE tied to VCC via pull-up ensures outputs remain high-Z during hot-plug events in modular automotive systems. |
| Wide Voltage Operation | 1.2 V–3.6 V supply range enables direct interfacing with LPDDR2/3 I/O, 1.8 V FPGAs, and 3.3 V microcontrollers. |
| Low Ground Bounce | Eight GND and four VCC pins distribute current paths, reducing ΔV noise that could corrupt adjacent analog or RF circuits. |
| AEC-Q100 Qualification | Grade 3 qualification confirms reliability over full automotive temperature range and lifetime vibration/humidity profiles. |
Applications
| Infotainment Display Interface | ADAS Camera Sensor Hub |
|---|---|
|
Use Scenario: Latching parallel pixel data from LVDS deserializers before feeding to GPU frame buffers. IC Role / Device Role / Timing Role: Synchronous 16-bit data register providing setup/hold margin for GPU read cycles. Use Value: Sub-nanosecond tpd and tight tsu/th specs ensure reliable capture at 100+ MHz pixel clocks without added timing margin. |
Use Scenario: Buffering serialized camera sensor outputs (e.g., MIPI CSI-2 parallelized) into domain controller memory maps. IC Role / Device Role / Timing Role: Bus-isolated data staging register enabling concurrent sensor acquisition and DMA transfer. Use Value: 3-state outputs prevent bus contention during multi-sensor arbitration; DCO reduces EMI near sensitive image processing blocks. |
| Body Control Module (BCM) I/O Expansion | Automotive Gateway Multiplexer |
|
Use Scenario: Extending GPIO count for door lock actuators, mirror controls, and lighting drivers in centralized BCM designs. IC Role / Device Role / Timing Role: Level-shifting and latched I/O expander interfacing 1.8 V MCU with 12 V load drivers. Use Value: 3.6 V I/O tolerance allows direct connection to 3.3 V level-shifted signals; AEC-Q100 Grade 3 ensures 15-year field life. |
Use Scenario: Isolating diagnostic data paths between CAN FD, LIN, and Ethernet domains in vehicle gateways. IC Role / Device Role / Timing Role: Synchronized data bridge between asynchronous protocol controllers with glitch-free bus handoff. Use Value: Dual-section architecture enables independent enable/disable per protocol lane; low tdis (<3.9 ns) prevents metastability in cross-domain transfers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit bus-oriented D-type flip-flop applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74AVC16374DGGR | Industrial-grade (−40 °C to +85 °C), same pinout and electrical specs but not AEC-Q100 qualified. | Lacks automotive qualification; unsuitable for safety-critical or under-hood deployment. | Select only for non-automotive industrial or consumer applications requiring identical functionality at lower cost. |
| 74LVC16374APAG | Wider VCC range (1.65 V–3.6 V); no DCO circuit; higher tpd (2.1 ns min at 3.3 V). | Higher propagation delay limits max frequency to ~200 MHz; lacks noise-suppression capability for high-speed buses. | Choose when DCO is unnecessary and cost sensitivity outweighs performance or EMI requirements. |
Compared with SN74AVC16374DGGR, the 74AVC16374DGG-Q10J adds AEC-Q100 Grade 3 validation and live-insertion support; versus 74LVC16374APAG, it delivers 3× faster tpd and active DCO-based signal integrity control-critical for automotive high-speed parallel interfaces.
Availability
74AVC16374DGG-Q10J is available at Aetrix Electronics and suitable for automotive infotainment systems, ADAS sensor hubs, and body control modules requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for 74AVC16374DGG-Q10J includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-performance, high-reliability logic, discrete, and MOSFET solutions for automotive, industrial, and mobile markets.
The 74AVC logic family targets low-voltage, high-speed bus interface applications in automotive electronics, emphasizing AEC-Q100 compliance, noise resilience, and mixed-voltage interoperability.
FAQ
Is 74AVC16374DGG-Q10J pin-compatible with standard 74AVC16374 variants?
Yes-74AVC16374DGG-Q10J uses the TSSOP48 (SOT362-1) package and shares identical pinout, electrical characteristics, and functional behavior with non-automotive 74AVC16374 parts such as SN74AVC16374DGGR. The only differences are AEC-Q100 qualification and enhanced screening for automotive use.
What is the recommended pull-up resistor value for nOE in live insertion applications?
A 10 kΩ pull-up resistor to VCC is recommended for nOE to ensure rapid transition to high-impedance state during power-up/down while limiting standby current. This value balances rise time, noise immunity, and power consumption per Nexperia's application guidance for live insertion.
Does the Dynamic Controlled Output (DCO) feature require external configuration?
No-DCO is fully internal and automatic. It operates without external components or configuration registers; impedance adjustment occurs dynamically during output transitions based on slew rate and load conditions, as defined in the device's silicon design.
Can 74AVC16374DGG-Q10J operate reliably at 1.2 V supply with full timing specifications?
Yes-propagation delay is specified down to 1.2 V (tpd ≤ 3.1 ns), and all static/dynamic parameters-including VIH/VIL thresholds and output drive strength-are guaranteed across the full 1.2 V–3.6 V range per Table 5 and Table 7 of the official datasheet.
74AVC16374DGG-Q10J Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- 74AVC
- Package/Case:
- 48-TFSOP (0.240", 6.10mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Function:
- Standard
- Type:
- D-Type
- Output Type:
- Tri-State, Non-Inverted
- Number of Elements:
- 2
- Number of Bits per Element:
- 8
- Clock Frequency:
- 350 MHz
- Max Propagation Delay @ V, Max CL:
- 3.3ns @ 3.3V, 30pF
- Trigger Type:
- Positive Edge
- Current - Output High, Low:
- 12mA, 12mA
- Voltage - Supply:
- 1.2V ~ 3.6V
- Current - Quiescent (Iq):
- 40 µA
- Input Capacitance:
- 5 pF
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 48-TSSOP
74AVC16374DGG-Q10J FAQ
1.How can I place an order for 74AVC16374DGG-Q10J through Aetrix?
Please submit a Request for Quotation (RFQ) for 74AVC16374DGG-Q10J on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 74AVC16374DGG-Q10J reliable?
The price and inventory of 74AVC16374DGG-Q10J are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 74AVC16374DGG-Q10J is usually 5 days.
3.What payment methods are accepted for 74AVC16374DGG-Q10J?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 74AVC16374DGG-Q10J transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 74AVC16374DGG-Q10J?
74AVC16374DGG-Q10J orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 74AVC16374DGG-Q10J order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 74AVC16374DGG-Q10J?
For technical support, including 74AVC16374DGG-Q10J datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 74AVC16374DGG-Q10J requirements.
6.How does Aetrix verify that 74AVC16374DGG-Q10J is sourced from the original manufacturer or authorized distributors?
All 74AVC16374DGG-Q10J products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 74AVC16374DGG-Q10J meets industry standards.
7.What is the process for return or replacement of 74AVC16374DGG-Q10J?
All 74AVC16374DGG-Q10J units undergo pre-shipment inspection (PSI). If there is an issue with 74AVC16374DGG-Q10J, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 74AVC16374DGG-Q10J part is unused and in its original packaging.
Return procedure for 74AVC16374DGG-Q10J:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
74AVC16374DGG-Q10J Tags
-
SN74HC74DR
Texas Instruments
-
SN74HC74PWR
Texas Instruments
-
74LVC1G74GT,115
Nexperia USA Inc.
-
SN74LVC2G74DCUR
Texas Instruments
-
CD4013BM96
Texas Instruments
-
SN74HCT273PWR
Texas Instruments
-
SN74LVC1G74DCUR
Texas Instruments
-
SN74HC574DWR
Texas Instruments
-
74LVC1G74DC,125
Nexperia USA Inc.
-
SN74HC273DWR
Texas Instruments
-
SN74HCT574DWR
Texas Instruments
-
SN74LVC1G74DCTR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
