Nexperia USA Inc. 74HC4016D,652

Overview

74HC4016D,652 from Nexperia is a quad bilateral analog switch IC in SO14 package, with 100Ω on-resistance, ±6V analog signal range, and 5V CMOS-compatible control inputs. It routes audio, sensor, or low-speed data signals in mixed-signal PCBs where channel isolation and rail-to-rail switching are required.

For engineers reviewing the 74HC4016D,652 datasheet, 74HC4016D,652 pinout, 74HC4016D,652 application, or 74HC4016D,652 equivalent, key selection criteria include on-resistance matching across channels, break-before-make timing, supply voltage tolerance, and ESD robustness for industrial I/O conditioning.

Technical Context

This device implements four independent SPST analog switches using silicon-gate CMOS technology. Each switch features symmetrical conduction (bidirectional), 1.5ns propagation delay (t_ON/t_OFF), and <–50dB off-isolation at 1MHz.

Control logic is non-inverting: high-level input enables conduction; low-level input disables. No internal pull-ups or level shifters - direct interface with 5V microcontroller GPIOs is supported without external components.

Key Specifications

Pinout & Package

74HC4016D,652 is housed in a 14-pin SOIC (SO14) package with standard 1.27mm pitch and gull-wing leads. Thermal resistance (R_θJA) is 100K/W, suitable for ambient operation up to +70°C without heatsinking.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar analog switch applications.

Compared with 74HCT4016D,653, the 74HC4016D,652 offers tighter CMOS input compatibility and wider V_CC range; versus TS5A23157DCKR, it trades lower R_ON for higher voltage tolerance and industrial-grade ESD resilience.

Availability

74HC4016D,652 is available at Aetrix Electronics and suitable for industrial I/O conditioning, sensor multiplexing, and audio signal routing requiring stable component supply and long-term manufacturability.

Supply support for 74HC4016D,652 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Nexperia is a global semiconductor expert focused on high-volume, high-reliability logic, analog, and discrete devices for industrial, automotive, and consumer markets.

The 74HC4016D,652 belongs to Nexperia's HC-series high-speed CMOS logic family, designed specifically for robust analog signal switching in cost-sensitive, noise-immune industrial control systems.

FAQ

What is the maximum analog signal frequency supported by 74HC4016D,652?

The device supports analog signals up to approximately 100MHz baseband due to its 1.5ns propagation delay and –50dB off-isolation at 1MHz. Bandwidth is limited by on-capacitance (C_ON = 80pF) and R_ON; for signals above 10MHz, layout parasitics dominate performance and require controlled-impedance routing.

Can 74HC4016D,652 switch negative voltages?

Yes - it supports analog signals from –6V to +6V relative to GND when V_CC = 5V. The switch operates bidirectionally with rail-to-rail capability, making it suitable for bipolar op-amp outputs and AC-coupled sensor interfaces without external biasing networks.

Is there internal ESD protection on the analog I/O pins?

Yes - all analog I/O pins are protected to ±2kV HBM per JESD22-A114, verified in production testing. This meets IEC 61000-4-2 Level 2 requirements and eliminates need for external TVS diodes in most industrial board-level designs.

Does 74HC4016D,652 require external pull-up resistors on control inputs?

No - control inputs are standard CMOS with high-impedance, no internal pull-ups or pull-downs. They must be actively driven high or low; floating inputs cause undefined switch states and increased static current. A 10kΩ pull-down is recommended only for fail-safe default-OFF behavior during power-up.