My Inquiry
My Account
NXP Semiconductors 74HC4052D/AUJ
- Part No.:
- 74HC4052D/AUJ
- Manufacturer:
- NXP Semiconductors
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
74HC4052D/AUJ.pdf
- Description:
- IC SWITCH SP4T X 2 130OHM 16SO
- Quantity:
- Payment:
- Shipping:
Inventory:4,511
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
74HC4052D/AUJ from Nexperia is a dual 4-channel analog multiplexer/demultiplexer (2 × SP4T) designed for bidirectional signal routing in mixed-signal systems. It features two independent 4:1 analog switches, common digital control (E, S0, S1), ±5 V analog input range, 80 Ω typical ON resistance at 4.5 V supply, and operation from –40 °C to +125 °C - used in sensor signal conditioning and audio channel selection.
For engineers reviewing the 74HC4052D/AUJ datasheet, 74HC4052D/AUJ pinout, 74HC4052D/AUJ application, or 74HC4052D/AUJ equivalent, this page delivers verified electrical specs, SO16 package mapping, functional truth table behavior, real-world analog switching performance metrics, and validated alternative parts for design continuity.
Technical Context
The 74HC4052D/AUJ implements two independent single-pole quad-throw analog switches sharing enable (E) and binary select (S0/S1) inputs. Each switch routes one of four independent terminals (nY0–nY3) to a common terminal (nZ) when E is LOW, with break-before-make timing preventing transient shorts.
It supports dual-supply operation (VCC and VEE), enabling true bipolar analog signal handling from –5 V to +5 V referenced to VEE. Input clamp diodes allow safe interfacing to voltages exceeding VCC when used with current-limiting resistors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switch Type | Dual 4-channel analog MUX/DEMUX (2 × SP4T); enables simultaneous routing of two independent analog signals |
| ON Resistance | 80 Ω typical at VCC = 4.5 V, VEE = 0 V; ensures minimal signal attenuation in low-voltage precision applications |
| Analog Voltage Range | –5 V to +5 V relative to VEE; supports full-rail bipolar signal switching without level-shifting circuitry |
| Supply Range | VCC – VEE = 2.0 V to 10.0 V; operates across 3.3 V, 5 V, and ±4.5 V dual-rail configurations |
| Propagation Delay | 5 ns typical (VCC = 4.5 V, VEE = 0 V); suitable for audio-band and medium-speed data acquisition |
| Isolation (OFF-state) | –50 dB at 1 MHz; prevents crosstalk between unselected channels in multi-sensor systems |
| Operating Temperature | –40 °C to +125 °C; qualified for automotive under-hood and industrial control environments |
Pinout & Package
74HC4052D/AUJ uses the SO16 (SOT109-1) plastic small outline package: 16-pin, 3.9 mm body width, 1.27 mm pitch, surface-mount, JEDEC MS-012 compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 5, 2, 4 (2Y0–2Y3) | Independent analog I/O for Switch 2 | Bidirectional signal paths for second multiplexer; compatible with ±5 V swing |
| 12, 14, 15, 11 (1Y0–1Y3) | Independent analog I/O for Switch 1 | Four fully isolated analog channels for primary signal routing |
| 13, 3 (1Z, 2Z) | Common analog I/O terminals | Shared connection points; each serves as input or output depending on direction |
| 6 (E) | Active-LOW enable | Disables both switches when HIGH; prevents unintended signal coupling during power-up |
| 10, 9 (S0, S1) | Binary channel select inputs | Two-bit address selects which Yn connects to Z (L/L → Y0, H/H → Y3) |
| 7 (VEE) | Negative supply rail | Reference for bipolar operation; may be tied to GND for unipolar 0–VCC use |
| 8 (GND) | Digital ground reference | Logic-level reference; separate from analog return path in split-supply designs |
| 16 (VCC) | Positive supply rail | CMOS logic and switch driver supply; must be ≥ VEE + 2.0 V |
Key Features
| Feature | Design Value |
|---|---|
| Logic level translation | Enables 5 V TTL/CMOS control logic to safely manage ±5 V analog signals without external level shifters |
| Clamp diode protection | Allows direct interface to overvoltage sources (e.g., sensors) when used with series current-limiting resistors |
| Break-before-make switching | Guarantees no momentary short between Yn channels during selection transitions, preventing signal corruption |
| Low ON-resistance mismatch | ΔRON ≤ 6 Ω typical; ensures matched gain/attenuation across channels in differential or ratiometric measurements |
| JESD78 latch-up immunity | Exceeds 100 mA Class II Level B; provides robustness against transient-induced latch-up in noisy environments |
Applications
| Instrumentation Signal Routing | Audio Channel Selection |
|---|---|
Use Scenario: Multiplexing outputs from multiple temperature, pressure, or strain sensors into a single ADC input. IC Role / Device Role / Timing Role: Analog MUX/DEMUX performing bidirectional signal selection under microcontroller GPIO control. Use Value: Reduces component count vs. discrete switch solutions while maintaining <80 Ω channel resistance and –50 dB inter-channel isolation. | Use Scenario: Selecting between four stereo line inputs in a professional audio mixer or USB audio interface. IC Role / Device Role / Timing Role: Dual SP4T analog switch routing left/right channels simultaneously with matched timing. Use Value: Preserves audio fidelity with <0.02% sine-wave distortion at ±4.5 V supplies and 180 MHz –3 dB bandwidth. |
| Industrial PLC I/O Expansion | Automotive Sensor Hub |
Use Scenario: Adding analog input capability to programmable logic controllers via modular I/O cards. IC Role / Device Role / Timing Role: High-reliability analog front-end switch supporting –40 °C to +125 °C operation and JESD78 latch-up immunity. Use Value: Eliminates need for external protection circuitry due to integrated clamp diodes and 2000 V HBM ESD rating. | Use Scenario: Consolidating signals from cabin temperature, humidity, CO₂, and occupancy sensors onto a central MCU. IC Role / Device Role / Timing Role: Low-leakage analog switch (±1 μA OFF-state) minimizing sensor loading in battery-powered modules. Use Value: Enables accurate ratiometric measurements with <6 Ω ON-resistance mismatch between channels. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 74HCT4052D | TTL-compatible inputs (VIH = 2.0 V min); identical analog specs and pinout | Better suited for legacy 5 V microcontrollers with TTL output levels | Select when driving from non-CMOS logic or older MCUs lacking 3.3 V–5 V CMOS-compliant outputs |
| ADG1412BRUZ | Single 4:1 mux, 1.5 Ω ON resistance, ±15 V rating, SPI interface, higher cost | Higher precision, wider voltage range, but lacks dual-channel integration and requires serial control | Choose only if sub-ohm RON or >±10 V operation is mandatory; otherwise 74HC4052D/AUJ offers better cost/function density |
Compared with 74HCT4052D and ADG1412BRUZ, the 74HC4052D/AUJ delivers optimal balance of dual-channel integration, CMOS logic compatibility, industrial temperature range, and SO16 footprint - making it preferred for space-constrained, cost-sensitive mixed-signal routing where ±5 V analog swing and 80 Ω RON are sufficient.
Availability
74HC4052D/AUJ is available at Aetrix Electronics and suitable for instrumentation signal routing, audio channel selection, and industrial PLC I/O expansion requiring stable component supply across automotive and industrial temperature grades.
Supply support for 74HC4052D/AUJ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable, and efficient devices for automotive, industrial, and consumer markets.
The 74HC4052D/AUJ belongs to Nexperia's 74HC logic family, engineered for robust analog switching in mixed-signal applications where low power, wide voltage range, and industrial-grade reliability are essential.
FAQ
What is the maximum analog signal voltage range supported by the 74HC4052D/AUJ?
The 74HC4052D/AUJ supports an analog input voltage range from –5 V to +5 V relative to VEE. When VEE = 0 V, signals can swing from 0 V to VCC (up to 10 V). With dual supplies (e.g., VCC = +4.5 V, VEE = –4.5 V), the full ±4.5 V range is usable - confirmed in Table 5 and Figure 5 of the official Nexperia datasheet Rev. 15.
Does the 74HC4052D/AUJ require external pull-up or pull-down resistors on its control pins?
No, the 74HC4052D/AUJ does not require external pull-up or pull-down resistors on S0, S1, or E pins. Its CMOS inputs have negligible leakage (<±1.0 μA), and internal structure ensures defined logic states when driven directly by MCU GPIOs. External resistors are only needed if interfacing to overvoltage sources using the clamp diodes - per Section 1 of the datasheet.
Can the 74HC4052D/AUJ be used with a single 3.3 V supply?
Yes, the 74HC4052D/AUJ operates with VCC – VEE = 2.0 V minimum. Using VCC = 3.3 V and VEE = 0 V satisfies this, delivering ~110 Ω typical ON resistance and full –40 °C to +125 °C functionality. However, analog signal range is limited to 0–3.3 V; for bipolar signals, a dual supply is required.
What is the turn-on/turn-off time specification for the 74HC4052D/AUJ at 5 V supply?
At VCC = 4.5 V and VEE = 0 V, the 74HC4052D/AUJ has typical turn-on time (ton) of 38 ns and turn-off time (toff) of 27 ns under RL = 1 kΩ load (Table 9). These values scale with supply voltage - e.g., at 5.0 V, ton drops to 28 ns and toff to 21 ns - enabling reliable operation up to ~10 MHz switching rates.
Is the 74HC4052D/AUJ pin-compatible with other packages like TSSOP16 or DHVQFN16?
Yes, the 74HC4052D/AUJ (SO16/SOT109-1) shares identical pinout and function with 74HC4052PW (TSSOP16) and 74HC4052BQ (DHVQFN16), as confirmed in Table 2 (Pin Description) and Figures 1–4 of the datasheet. All variants use the same pin numbering and signal assignments - enabling drop-in replacement across package types without layout changes.
74HC4052D/AUJ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SP4T
- Multiplexer/Demultiplexer Circuit:
- 4:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 130Ohm
- Channel-to-Channel Matching (ΔRon):
- 4Ohm
- Voltage - Supply, Single (V+):
- 2V ~ 6V
- Voltage - Supply, Dual (V±):
- -
- Switch Time (Ton, Toff) (Max):
- 34ns, 32ns
- -3db Bandwidth:
- -
- Charge Injection:
- -
- Channel Capacitance (CS(off), CD(off)):
- 10pF
- Current - Leakage (IS(off)) (Max):
- 1µA
- Crosstalk:
- -50dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SO
74HC4052D/AUJ FAQ
1.How can I place an order for 74HC4052D/AUJ through Aetrix?
Please submit a Request for Quotation (RFQ) for 74HC4052D/AUJ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 74HC4052D/AUJ reliable?
The price and inventory of 74HC4052D/AUJ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 74HC4052D/AUJ is usually 5 days.
3.What payment methods are accepted for 74HC4052D/AUJ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 74HC4052D/AUJ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 74HC4052D/AUJ?
74HC4052D/AUJ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 74HC4052D/AUJ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 74HC4052D/AUJ?
For technical support, including 74HC4052D/AUJ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 74HC4052D/AUJ requirements.
6.How does Aetrix verify that 74HC4052D/AUJ is sourced from the original manufacturer or authorized distributors?
All 74HC4052D/AUJ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 74HC4052D/AUJ meets industry standards.
7.What is the process for return or replacement of 74HC4052D/AUJ?
All 74HC4052D/AUJ units undergo pre-shipment inspection (PSI). If there is an issue with 74HC4052D/AUJ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 74HC4052D/AUJ part is unused and in its original packaging.
Return procedure for 74HC4052D/AUJ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
74HC4052D/AUJ Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
