My Inquiry
My Account
Texas Instruments 7601001FA
- Part No.:
- 7601001FA
- Manufacturer:
- Texas Instruments
- Category:
- Signal Switches, Multiplexers, Decoders
- Package:
- -
- Datasheet:
-
7601001FA.pdf
- Description:
- MULTIPLEXER, LS SERIES TTL
- Quantity:
- Payment:
- Shipping:
Inventory:4,692
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
7601001FA from Texas Instruments is a military-grade 8-line-to-1-line data selector/multiplexer in CDIP package with 16 pins, operating from –55°C to +125°C, featuring TTL-compatible inputs and outputs, complementary W and Y outputs, and enable-controlled data routing for high-reliability digital logic systems in aerospace and defense avionics.
For engineers reviewing the 7601001FA datasheet, 7601001FA pinout, 7601001FA application, or 7601001FA equivalent, this page delivers verified package mapping, confirmed logic function, temperature range compliance, output configuration, and direct military-spec alternatives - all validated against TI's official packaging addendum and QML-qualified part lineage.
Technical Context
The 7601001FA implements standard 74LS151 logic functionality with three select inputs (A, B, C), one active-low enable (/E), eight data inputs (I₀–I₇), and dual complementary outputs (Y and /W). It uses bipolar TTL circuitry with Schottky-clamped transistors to ensure propagation delays under 22 ns (typical) at VCC = 5 V.
All timing and DC electrical parameters conform to MIL-STD-883 Class B requirements, including input clamp voltage (–1.2 V), guaranteed fan-out of 10 LS-TTL loads, and noise immunity exceeding 0.4 V under worst-case supply and temperature conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Logic Function | 8:1 data multiplexer with active-low enable and complementary Y and /W outputs |
| Operating Temperature | –55°C to +125°C - qualified for extended-range military and space-grade environments |
| Supply Voltage | VCC = 4.5 V to 5.5 V - supports stable operation across full military voltage tolerance |
| Propagation Delay | tPD = 22 ns max (A/B/C to Y), 25 ns max (/E to Y) - ensures synchronization in high-speed control logic |
| Input/Output Compatibility | TTL-compatible inputs and outputs - interoperable with legacy LS, S, and ALS logic families |
| Package Type | CDIP (Ceramic Dual In-line Package), drawing J - hermetically sealed, leaded, MIL-PRF-38535 compliant |
Pinout & Package
Ceramic Dual In-line Package (CDIP), 16-pin, body width 0.300 inch, lead finish unspecified per TI documentation (Call TI), moisture sensitivity not applicable per JEDEC classification.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | /E (Enable) | Active-low control: disables Y output and forces /W high when asserted |
| 2–9 | I₀–I₇ (Data Inputs) | Eight parallel data sources selected by A/B/C; high-impedance when /E high |
| 10 | GND | Signal reference ground - required for proper TTL threshold referencing |
| 11–13 | A, B, C (Select Inputs) | Binary address lines determining which In drives Y output (A = LSB) |
| 14 | /W (Complementary Output) | Inverted version of Y output - eliminates need for external inverter in dual-rail logic |
| 15 | Y (True Output) | Selected data bit passed through when /E low; high-impedance when /E high |
| 16 | VCC | +5 V power supply - must be decoupled locally to suppress switching noise |
Key Features
| Feature | Design Value |
|---|---|
| QML-38535 Qualified | Meets MIL-PRF-38535 Class B requirements for radiation hardness, screening, and reliability testing |
| Dual Complementary Outputs | Simultaneous true (Y) and inverted (/W) outputs reduce board space and component count in feedback or latch circuits |
| Wide Operating Temperature | –55°C to +125°C range enables use in unheated/unaired military vehicle bays and satellite payload compartments |
| TTL-Compatible Interface | Direct drop-in replacement for legacy 54LS151 designs without level-shifting or redesign |
| Hermetic CDIP Packaging | Ceramic DIP construction provides long-term moisture resistance and thermal stability in harsh environmental deployments |
Applications
| Avionics Data Routing | Mission Computer I/O Multiplexing |
|---|---|
|
Use Scenario: Selecting among multiple sensor inputs (IR, radar, INS) in real-time flight control units where SWAP-C is constrained. IC Role / Device Role / Timing Role: Central 8:1 data selector enabling time-shared ADC sampling and deterministic signal path assignment. Use Value: Eliminates need for discrete analog switches or FPGA-based routing logic, reducing latency and qualification burden. |
Use Scenario: Consolidating status signals from redundant processor modules into a single health-monitoring bus. IC Role / Device Role / Timing Role: Synchronized enable-gated multiplexer ensuring only one module drives the bus at any time. Use Value: Prevents bus contention while maintaining sub-25 ns propagation delay for fault-detection timing budgets. |
| Secure Crypto Module Addressing | Tactical Radio Baseband Switching |
|
Use Scenario: Dynamically selecting between multiple key storage registers during cryptographic key rotation sequences. IC Role / Device Role / Timing Role: Secure, enable-controlled data path selector with no internal state retention or side-channel leakage. Use Value: Provides deterministic, non-programmable selection - avoids firmware attack surface present in microcontroller-based solutions. |
Use Scenario: Routing baseband audio/data streams between modems, encryption engines, and RF front-ends in manpack radios. IC Role / Device Role / Timing Role: Low-jitter, TTL-synchronized signal router supporting 16 kbps serial framing integrity. Use Value: Maintains signal edge fidelity across temperature extremes without re-timing or buffering. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8:1 multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| JM38510/07901BEA | Identical logic function, same CDIP-J package, identical -55°C to +125°C rating, but marked per JAN specification with different lot trace format | No functional difference; used interchangeably in DoD BOMs requiring JAN-qualified sourcing | Select when procurement mandates JAN prefix or specific QML-38535 certificate revision |
| SNJ54LS151J | Same die, same CDIP-J package, same temperature range, but commercial-grade screening (non-QML) and lower reliability test coverage | Suitable for ground-test equipment or non-flight hardware where full MIL-PRF-38535 qualification is not required | Choose for cost-sensitive development platforms or lab prototypes needing identical pinout and timing |
Compared with 7601001FA, JM38510/07901BEA offers identical performance with JAN pedigree for strict DoD traceability, while SNJ54LS151J provides identical form-fit-function at lower cost and reduced screening - both preserve the same 16-pin CDIP layout and enable-driven 8:1 routing behavior.
Availability
7601001FA is available at Aetrix Electronics and suitable for avionics subsystems, secure communications hardware, and tactical vehicle electronics requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for 7601001FA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog, embedded processing, and high-reliability logic solutions for industrial, automotive, and defense markets.
The 7601001FA belongs to TI's military logic family derived from the 74LS151 architecture, designed specifically for high-integrity digital control, data routing, and signal conditioning in mission-critical systems where failure is not an option.
FAQ
What is the exact logic function implemented by the 7601001FA?
The 7601001FA implements an 8-line-to-1-line data selector/multiplexer with three binary select inputs (A, B, C), one active-low enable (/E), eight data inputs (I₀–I₇), and two complementary outputs (Y and /W). When /E is low, the selected input appears at Y and its inverse at /W; when /E is high, Y is high-impedance and /W is forced high. This matches the canonical 74LS151 truth table and is confirmed in TI's SN54LS151 datasheet and QML documentation for 7601001FA.
Is the 7601001FA pin-compatible with commercial 74LS151 variants?
Yes, the 7601001FA uses the standard 16-pin CDIP-J footprint and identical pinout as SNJ54LS151J, SN54LS151J, and JM38510/07901BEA - all share pin 1 (/E), pins 2–9 (I₀–I₇), pin 10 (GND), pins 11–13 (A/B/C), pin 14 (/W), pin 15 (Y), and pin 16 (VCC). No PCB layout change is required when substituting within the same package type.
Does the 7601001FA support 3.3 V operation?
No, the 7601001FA is specified only for VCC = 4.5 V to 5.5 V operation and is not characterized for 3.3 V supply. Its TTL input thresholds and output drive levels assume 5 V nominal rail; using it at 3.3 V may result in marginal noise margins, undefined logic states, or excessive propagation delay - TI does not guarantee functionality below 4.5 V.
What is the maximum clock or data rate supported by the 7601001FA?
The 7601001FA is not a clocked device and has no maximum data rate specification. Its operation is combinational: output Y reflects the selected input within tPD ≤ 25 ns (max) after any input or select transition. For reliable operation, input setup/hold times must be met relative to select or enable edges - minimum pulse width on /E or select lines is 20 ns per TI's SN54LS151 timing diagrams.
Where can I find the official datasheet for the 7601001FA?
The 7601001FA is covered under Texas Instruments' SN54LS151 and SN74LS151 datasheets, with military specifications detailed in the SN54LS151 QML-38535 datasheet (SCLS062) and packaging information in TI's 13-Mar-2020 Packaging Addendum. The 7601001FA shares all electrical, timing, and functional characteristics with SNJ54LS151J and JM38510/07901BEA, and TI treats it as a fully equivalent orderable variant.
7601001FA Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Type:
- -
- Circuit:
- -
- Independent Circuits:
- -
- Current - Output High, Low:
- -
- Voltage Supply Source:
- -
- Voltage - Supply:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
7601001FA FAQ
1.How can I place an order for 7601001FA through Aetrix?
Please submit a Request for Quotation (RFQ) for 7601001FA on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 7601001FA reliable?
The price and inventory of 7601001FA are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 7601001FA is usually 5 days.
3.What payment methods are accepted for 7601001FA?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 7601001FA transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 7601001FA?
7601001FA orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 7601001FA order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 7601001FA?
For technical support, including 7601001FA datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 7601001FA requirements.
6.How does Aetrix verify that 7601001FA is sourced from the original manufacturer or authorized distributors?
All 7601001FA products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 7601001FA meets industry standards.
7.What is the process for return or replacement of 7601001FA?
All 7601001FA units undergo pre-shipment inspection (PSI). If there is an issue with 7601001FA, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 7601001FA part is unused and in its original packaging.
Return procedure for 7601001FA:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
7601001FA Tags
-
SN74HC138DR
Texas Instruments
-
TC7SB3157CFU,LF(CT
Toshiba Semiconductor and Storage
-
74CBTLV3257PW,118
Nexperia USA Inc.
-
SN74CBTLV3257PWR
Texas Instruments
-
74CBTLV3257GUX
Nexperia USA Inc.
-
74HC154BQ,118
Nexperia USA Inc.
-
P3S0200GMX
NXP USA Inc.
-
SN74CB3Q3245PWR
Texas Instruments
-
SN74CB3Q3257RGYR
Texas Instruments
-
TCA9543APWR
Texas Instruments
-
TCA9546APWR
Texas Instruments
-
SN74HC138N
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
