My Inquiry
My Account
Analog Devices Inc. AD8315ARM-REEL
- Part No.:
- AD8315ARM-REEL
- Manufacturer:
- Analog Devices Inc.
- Category:
- RF Power Controller ICs
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Datasheet:
-
AD8315ARM-REEL.pdf
- Description:
- 50 DB GSM PA CONTROLLER
- Quantity:
- Payment:
- Shipping:
Inventory:29,978
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD8315ARM-REEL from Analog Devices is a 50 dB dynamic range RF logarithmic detector and APC controller IC for GSM/EDGE/DCS transmitter power control, featuring 23 mV/dB log slope, −60 dBm intercept at 0.9 GHz, 0.1–2.5 GHz frequency coverage, and rail-to-rail 250 mV to VPOS−200 mV VAPC output driving up to 6 mA - deployed in mobile handset PA gain loops.
For engineers reviewing the AD8315ARM-REEL datasheet, AD8315ARM-REEL pinout, AD8315ARM-REEL application in GSM PA control, or AD8315ARM-REEL equivalent for RF power management ICs, this page delivers verified specifications, validated pin functions, temperature-stable log conformance (±0.75 dB over −30°C to +85°C), and real-world integration guidance for battery-powered wireless transmitters.
Technical Context
The AD8315ARM-REEL implements a five-stage cascaded detector architecture with four 10 dB amplifier/limiter cells plus one front-end passive detector, enabling precise logarithmic compression across 50 dB. Its current-mode error summation integrates VSET-derived reference current against detector-derived log current to generate a true integrator output at FLTR.
VAPC buffer uses low-noise (25 nV/√Hz), rail-to-rail, ×1.35-gain architecture delivering 30 MHz small-signal bandwidth and 13 V/μs slew rate, while internal ac-coupling sets minimum operating frequency at 16 MHz. The device operates from 2.7 V to 5.5 V and achieves 4 μA shutdown current.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Frequency Range | 0.1 GHz to 2.5 GHz - supports single/dual/triple-band GSM, DCS, EDGE handsets without external tuning. |
| Dynamic Range | 50 dB (−49 dBm to +2 dBm @ 0.9 GHz, 50 Ω) - enables full-range closed-loop PA control from standby to peak transmit power. |
| Log Slope | 23 mV/dB (typ. @ 0.9 GHz) - provides linear-in-dB scaling for direct DAC-driven VSET interface with 43.5 dB/V scale factor. |
| Intercept | −60 dBm @ 0.9 GHz (−73 dBV) - defines zero-output reference point; stable within ±3 dB across 0.1–2.5 GHz. |
| VAPC Output Range | 250 mV to VPOS−200 mV - directly interfaces standard RF PA gain control pins without level-shifting circuitry. |
| Supply Current | 8.5 mA @ 2.7 V (ENBL high); 4 μA (ENBL low) - enables ultra-low-power sleep mode for battery longevity in mobile devices. |
| Enable Response Time | 4–5 μs (ENBL high to VAPC within 1%) - ensures rapid loop activation during TDMA burst transitions. |
Pinout & Package
AD8315ARM-REEL is housed in an 8-lead MSOP package (3 mm × 3 mm, 0.65 mm pitch) with exposed paddle (thermal pad). Pin 6 is NC; Pin 5 (COMM) is system ground reference; all analog and supply pins are internally decoupled.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| RFIN (Pin 1) | RF Input | 50 Ω-terminated, internally ac-coupled input; 2.8 kΩ || 0.9 pF impedance at 0.1 GHz; supports −44 dBm to +2 dBm. |
| ENBL (Pin 2) | Power Enable | CMOS-compatible enable: ≥1.8 V enables operation; ≤0.8 V disables to 4 μA sleep current. |
| VSET (Pin 3) | Setpoint Reference | 0.25 V to 1.4 V input range defines target RF power level; >100 MΩ input resistance minimizes DAC loading. |
| FLTR (Pin 4) | Integrator Filter Node | Connect external capacitor (e.g., 220 pF) to COMM to set loop bandwidth and stability; internal current-mode integrator. |
| COMM (Pin 5) | Ground Reference | Device common; must be low-impedance RF/analog ground; paddle connection improves thermal performance. |
| VAPC (Pin 7) | Control Voltage Output | Rail-to-rail buffered output drives PA gain control pin; 6 mA sink/source capability; 25 nV/√Hz noise floor. |
| VPOS (Pin 8) | Positive Supply | 2.7 V to 5.5 V operation; 8.5 mA quiescent current; 60 mW max dissipation; θJA = 200°C/W (MSOP). |
Key Features
| Feature | Design Value |
|---|---|
| True integration function in control loop | Current-mode error integrator (VSET vs. detector sum) eliminates need for external op-amp integrators in PA control loops. |
| Temperature-stable linear-in-dB response | ±0.75 dB log conformance error over −30°C to +85°C at 0.9 GHz - enables robust closed-loop performance without calibration. |
| Low-power operation | 20 mW @ 2.7 V (8.5 mA); 10.8 μW sleep power - extends battery life in portable transmitters. |
| Direct VAPC interface to PA modules | VAPC swings 250 mV to VPOS−200 mV with 6 mA drive - eliminates level-shifting or buffering components. |
| Wideband RF detection | Validated 50 dB dynamic range from 0.1 GHz to 2.5 GHz - covers GSM850/900, DCS1800, PCS1900, and EDGE bands. |
Applications
| GSM Handset Transmitter | EDGE Power Amplifier Control |
|---|---|
Use Scenario: Closed-loop transmit power regulation in quad-band GSM mobile phones during TDMA burst transmission. IC Role / Device Role / Timing Role: RF log detector and integrator generating VAPC control voltage for PA gain adjustment on a per-burst basis. Use Value: Maintains ±1 dB transmit power accuracy across battery voltage sag, temperature drift, and PA aging - critical for GSM power class compliance. |
Use Scenario: Dynamic power control of EDGE-class PAs during 8-PSK modulation with varying peak-to-average power ratio. IC Role / Device Role / Timing Role: Fast-response logarithmic controller providing integrated VAPC output to stabilize average and peak RF output. Use Value: Enables accurate EVM and ACLR performance by suppressing PA gain variation across modulation envelope peaks. |
| DCS1800 Base Station Front-End | Portable Wireless Test Equipment |
Use Scenario: Transmit power monitoring and feedback in compact DCS1800 femtocell RF front-ends. IC Role / Device Role / Timing Role: Low-power RF detector providing calibrated dBm-level feedback for digital PA bias control algorithms. Use Value: Reduces component count versus diode-based detectors while improving temperature stability and dynamic range linearity. |
Use Scenario: Embedded RF power measurement channel in handheld spectrum analyzers or signal generators. IC Role / Device Role / Timing Role: Wideband log amp subsystem delivering fast, temperature-compensated RF amplitude readout. Use Value: Provides 50 dB measurement range with <150 ns response time - suitable for burst-mode RF signal analysis. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar RF power control applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AD8313ARMZ-REEL7 | 55 dB range, no integrated integrator; VOUT requires external op-amp loop; 20 mV/dB slope; same MSOP-8 package. | Requires external compensation components; suited for measurement-only or custom-control-loop designs. | Select when absolute measurement accuracy > control simplicity; not drop-in for AD8315ARM-REEL's integrated APC function. |
| MAX2016ETE+ | 45 dB range, 2.7–5.5 V supply, integrated VAPC driver, but only 0.8–2.5 GHz coverage; different pinout (TQFN-16). | Limited low-frequency support below 0.8 GHz; incompatible PCB layout; higher quiescent current (12 mA). | Select for 2G/3G systems above 800 MHz where footprint flexibility exists; verify VSET interface compatibility. |
Compared with AD8313ARMZ-REEL7 and MAX2016ETE+, the AD8315ARM-REEL uniquely combines 50 dB dynamic range, true current-mode integration, GSM-optimized 0.1 GHz low-end response, and MSOP-8 pin compatibility - making it the most direct solution for legacy and cost-sensitive handset PA control.
Availability
AD8315ARM-REEL is available at Aetrix Electronics and suitable for GSM handset design, EDGE transmitter development, and portable RF test equipment requiring stable component supply and long-term production continuity.
Supply support for AD8315ARM-REEL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Norwood, MA.
The AD8315ARM-REEL belongs to Analog Devices' RF logarithmic detector and controller product line, engineered specifically for precision, low-power, closed-loop RF power management in battery-operated wireless transceivers.
FAQ
What is the minimum RF input frequency supported by the AD8315ARM-REEL?
The AD8315ARM-REEL features internal high-pass coupling with a corner frequency of approximately 16 MHz, enabling operation down to 0.02 GHz (20 MHz) with reduced dynamic range. Full 50 dB specification applies from 0.1 GHz to 2.5 GHz per datasheet Table 1. Below 0.1 GHz, log conformance degrades gradually but remains usable for coarse-level detection in certain ISM band applications.
Can the AD8315ARM-REEL be used with a 50 Ω source without external matching?
Yes - the AD8315ARM-REEL RFIN pin presents 2.8 kΩ resistive || 0.9 pF capacitive impedance at 0.1 GHz, but its internal ac-coupling and detector architecture are optimized for direct 50 Ω termination. The datasheet specifies performance using a 52.3 Ω source (equivalent to 50 Ω with 2.3 Ω series resistor for calibration), confirming compatibility with standard 50 Ω RF signal paths without external matching networks.
How does the FLTR pin function in the AD8315ARM-REEL control loop?
The FLTR pin (Pin 4) is the internal integrator node where the difference between VSET-derived current and detector-summed log current develops voltage across an external capacitor (e.g., 220 pF to COMM). This forms the dominant pole of the closed-loop system; selecting CFLT sets loop bandwidth and stability margin - larger values reduce bandwidth but improve ripple rejection, critical for GSM burst-edge settling.
What is the maximum load current the AD8315ARM-REEL VAPC output can drive?
The AD8315ARM-REEL VAPC output can source or sink up to 6 mA while maintaining specified linearity and voltage swing (250 mV to VPOS−200 mV). This is sufficient to drive typical RF power amplifier gain control inputs, including those with 1–10 nF bypass capacitance. Load currents exceeding 6 mA may compress the upper output range or increase settling time beyond datasheet limits.
Does the AD8315ARM-REEL require external power supply decoupling?
Yes - the AD8315ARM-REEL requires a 0.1 µF ceramic capacitor placed as close as possible between VPOS (Pin 8) and COMM (Pin 5), per Figure 23 and layout recommendations in the datasheet. Additional bulk capacitance (e.g., 1–10 µF tantalum) is recommended on the board-level supply rail to suppress low-frequency noise and transient droop during ENBL toggling or RF burst events.
AD8315ARM-REEL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- AD8315
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Packaging:
- Bulk
- Product Status:
- Active
- RF Type:
- DCS, GSM, EDGE
- Frequency:
- 100MHz ~ 2.5GHz
- Features:
- -
- Supplier Device Package:
- 8-MSOP
AD8315ARM-REEL FAQ
1.How can I place an order for AD8315ARM-REEL through Aetrix?
Please submit a Request for Quotation (RFQ) for AD8315ARM-REEL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD8315ARM-REEL reliable?
The price and inventory of AD8315ARM-REEL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD8315ARM-REEL is usually 5 days.
3.What payment methods are accepted for AD8315ARM-REEL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD8315ARM-REEL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD8315ARM-REEL?
AD8315ARM-REEL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD8315ARM-REEL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD8315ARM-REEL?
For technical support, including AD8315ARM-REEL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD8315ARM-REEL requirements.
6.How does Aetrix verify that AD8315ARM-REEL is sourced from the original manufacturer or authorized distributors?
All AD8315ARM-REEL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD8315ARM-REEL meets industry standards.
7.What is the process for return or replacement of AD8315ARM-REEL?
All AD8315ARM-REEL units undergo pre-shipment inspection (PSI). If there is an issue with AD8315ARM-REEL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD8315ARM-REEL part is unused and in its original packaging.
Return procedure for AD8315ARM-REEL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD8315ARM-REEL Tags
-
AD8311ACBZ-P7
Analog Devices Inc.
-
LMV242LD/NOPB
Texas Instruments
-
MAX4473EUA+
Analog Devices Inc./Maxim Integrated
-
MAX4473EUA
Analog Devices Inc./Maxim Integrated
-
MAX4473EUA-T
Analog Devices Inc./Maxim Integrated
-
AD8316ACP-REEL
Analog Devices Inc.
-
ADP3403ARU-REEL
Analog Devices Inc.
-
AD8316ARM-REEL7
Analog Devices Inc.
-
AD8315ACP-REEL7
Analog Devices Inc.
-
AD8315ARM-REEL7
Analog Devices Inc.
-
AD8316ACP-REEL7
Analog Devices Inc.
-
AD8316ARM
Analog Devices Inc.
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
