My Inquiry
My Account
Analog Devices Inc. AD8510ARMZ-REEL
- Part No.:
- AD8510ARMZ-REEL
- Manufacturer:
- Analog Devices Inc.
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Datasheet:
-
AD8510ARMZ-REEL.pdf
- Description:
- IC OPAMP JFET 1 CIRCUIT 8MSOP
- Quantity:
- Payment:
- Shipping:
Inventory:16,877
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD8510ARMZ-REEL from Analog Devices is a single-channel, precision JFET-input operational amplifier optimized for high-impedance sensor interfaces and low-noise signal conditioning. It delivers 400 µV max offset voltage, 8 nV/√Hz voltage noise at 1 kHz, 20 V/µs slew rate, and 0.1% settling in 500 ns - enabling accurate photodiode amplification and precision current measurement in medical instrumentation and automated test equipment.
For engineers reviewing the AD8510ARMZ-REEL datasheet, AD8510ARMZ-REEL pinout, AD8510ARMZ-REEL application, or AD8510ARMZ-REEL equivalent, key selection criteria include input bias current (25 pA typ at ±15 V), unity-gain stability with capacitive loads up to 1000 pF, −40°C to +125°C operation, and MSOP-8 packaging for space-constrained analog front-ends.
Technical Context
The AD8510ARMZ-REEL employs a JFET input stage to achieve ultra-low input bias current and low voltage noise, making it suitable for transimpedance amplifiers with multi-MΩ feedback resistors. Its fast settling time and high phase margin (52° at ±15 V) ensure stable operation even with 500 pF capacitive loads without external compensation.
Unlike legacy JFET op-amps, it eliminates output phase reversal when inputs exceed common-mode range and maintains dc precision across temperature via low TCVOS (1 µV/°C typical). It operates from ±5 V to ±15 V dual supplies and supports rail-to-rail output swing into 2 kΩ loads.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Offset Voltage (B Grade) | 0.4 mV max - enables ≤12-bit accuracy in shunt-based current sensing without trimming. |
| Input Bias Current | 25 pA typical at ±15 V - supports high-Z sensor interfaces (e.g., piezoelectric, pH electrodes) without signal degradation. |
| Voltage Noise Density | 8 nV/√Hz at 1 kHz - ensures minimal added noise in low-level audio and instrumentation signal chains. |
| Slew Rate | 20 V/µs - allows faithful reproduction of fast transients in DAC output buffering and pulse amplification. |
| Gain Bandwidth Product | 8 MHz - supports stable closed-loop gain ≥10 at 500 kHz for anti-aliasing and active filter designs. |
| Settling Time | 500 ns to 0.1% - matches sub-1 µs DAC settling, minimizing timing uncertainty in data acquisition systems. |
| Operating Temperature | −40°C to +125°C - qualified for industrial and automotive under-hood signal conditioning applications. |
Pinout & Package
AD8510ARMZ-REEL is housed in an 8-lead MSOP (RM suffix), measuring 3.0 mm × 3.0 mm × 0.85 mm, with exposed pad for thermal enhancement. The package is RoHS-compliant and designed for surface-mount reflow assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8 | NULL | No-connect pins; must be left floating or tied to ground per layout best practice to minimize parasitic coupling. |
| 2 | –IN | Inverting input; high-impedance JFET node requiring guarded trace routing to prevent leakage-induced offset drift. |
| 3 | +IN | Non-inverting input; matched to –IN for optimal CMRR; sensitive to PCB contamination and ESD. |
| 4 | V– | Negative supply rail; requires local 0.1 µF ceramic decoupling placed <2 mm from pin to suppress high-frequency PSRR degradation. |
| 5 | NC | No-connect; electrically isolated internal node - must not be soldered or routed to avoid latent reliability risk. |
| 6 | V+ | Positive supply rail; shares same decoupling requirement as V–; asymmetry between V+ and V– paths degrades PSRR. |
| 7 | OUT | Amplifier output; capable of ±54 mA drive into 600 Ω; requires series resistor or snubber for >500 pF capacitive loads. |
Key Features
| Feature | Design Value |
|---|---|
| No phase reversal | Guarantees safe operation when inputs exceed supply rails - eliminates system lockup risk in overvoltage-prone sensor front-ends. |
| Unity-gain stable | Operates reliably at G = +1 without external compensation, simplifying design of buffers and active filters. |
| Low TCVOS | 1 µV/°C typical drift - maintains <1 µV total offset shift over 85°C ambient range, critical for uncalibrated precision systems. |
| Capacitive load drive | Stable with up to 1000 pF in unity gain - avoids need for isolation resistors that degrade bandwidth and noise performance. |
| Wide supply range | ±5 V to ±15 V operation - supports both low-power portable instrumentation and high-dynamic-range industrial test gear. |
Applications
| Photodiode Amplification | Precision Current Measurement |
|---|---|
Use Scenario: Converting weak photocurrents (pA–nA) from scientific-grade photodiodes into stable voltage outputs. IC Role / Device Role / Timing Role: Transimpedance amplifier with ultra-low input bias current and low voltage noise to maximize SNR. Use Value: Enables detection of sub-picoamp signals with <0.0005% THD+N, supporting high-resolution optical spectroscopy. | Use Scenario: Measuring load current via mΩ shunt resistors in motor control or power supply monitoring. IC Role / Device Role / Timing Role: Precision difference amplifier rejecting common-mode voltage while amplifying microvolt-level shunt drops. Use Value: Delivers 12-bit linearity over −40°C to +125°C without calibration, reducing BOM cost and firmware complexity. |
| Medical Instrumentation | Audio Signal Conditioning |
Use Scenario: Front-end amplification of ECG/EEG biopotential signals with high source impedance and low amplitude. IC Role / Device Role / Timing Role: Low-noise, low-drift buffer isolating electrode interface from downstream ADC and filtering stages. Use Value: Achieves 8 nV/√Hz noise floor and <500 ns settling - preserves waveform fidelity for arrhythmia detection algorithms. | Use Scenario: Line-level preamplification and tone control in professional audio mixers and studio interfaces. IC Role / Device Role / Timing Role: High-slew, low-distortion gain stage preserving harmonic integrity in wideband analog paths. Use Value: 0.0005% THD+N at 1 kHz and 20 V/µs slew rate enable transparent amplification without coloration. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar precision JFET op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| OPA140AIDBVR | Lower input bias current (0.5 pA typ), higher GBP (11 MHz), but higher voltage noise (11 nV/√Hz). | Better for femtoamp-level photodiode circuits; less optimal for low-noise audio due to higher en. | Select OPA140AIDBVR when input bias current dominates error budget; AD8510ARMZ-REEL preferred for balanced noise/speed/precision. |
| LT1028CS8#PBF | Higher slew rate (25 V/µs), lower noise (0.85 nV/√Hz), but larger SOIC-8 package and no extended temp rating. | Superior for ultra-low-noise RF/IF amplification; unsuitable for automotive or extended-temp industrial use. | Choose LT1028CS8#PBF only in lab-grade, room-temp, ultra-low-noise applications; AD8510ARMZ-REEL offers broader environmental robustness. |
Compared with OPA140AIDBVR and LT1028CS8#PBF, AD8510ARMZ-REEL provides the optimal trade-off of 25 pA input bias, 8 nV/√Hz noise, 500 ns settling, and −40°C to +125°C qualification - making it uniquely suited for production-grade medical, industrial, and test equipment where reliability and consistency outweigh marginal parameter extremes.
Availability
AD8510ARMZ-REEL is available at Aetrix Electronics and suitable for precision current measurement, photodiode amplification, and medical instrumentation requiring stable component supply across long-lifecycle industrial programs.
Supply support for AD8510ARMZ-REEL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Norwood, MA.
The AD8510ARMZ-REEL belongs to the AD851x family of precision JFET op-amps, engineered specifically for high-impedance, low-noise, wide-bandwidth signal conditioning in demanding instrumentation and industrial applications.
FAQ
What is the maximum capacitive load the AD8510ARMZ-REEL can drive without oscillation?
The AD8510ARMZ-REEL is unconditionally stable and can drive up to 1000 pF in unity-gain configuration without oscillation. For loads exceeding 500 pF, a snubber network (e.g., 100 Ω + 1 nF) is recommended to suppress overshoot and ringing while preserving full output swing - a capability confirmed in Figure 46 of the Rev. K datasheet.
Does the AD8510ARMZ-REEL suffer from output phase reversal when inputs exceed the supply rails?
No, the AD8510ARMZ-REEL does not exhibit output phase reversal under input overvoltage conditions - a key differentiator from older JFET op-amps. This behavior is explicitly guaranteed in the General Description and verified in Figure 40 (Rev. K datasheet), ensuring safe operation in sensor interfaces where transient overvoltage is possible.
What is the typical input bias current of the AD8510ARMZ-REEL at ±15 V supply?
The typical input bias current of the AD8510ARMZ-REEL is 25 pA at ±15 V supply and 25°C, as specified in Table 2 (Electrical Characteristics) of the Rev. K datasheet. This value increases to 10 nA maximum over the full −40°C to +125°C operating range, supporting reliable high-impedance node interfacing across industrial temperatures.
Is the AD8510ARMZ-REEL unity-gain stable?
Yes, the AD8510ARMZ-REEL is unity-gain stable, as stated in both the FEATURES and GENERAL DESCRIPTION sections of the Rev. K datasheet. It achieves this without external compensation, enabling straightforward implementation in buffer, follower, and active filter configurations - a requirement verified by phase margin measurements of 52° at ±15 V (Figure 17).
What package type is used for the AD8510ARMZ-REEL?
The AD8510ARMZ-REEL uses an 8-lead MSOP package (RM suffix), as shown in Figure 1 and documented in the Ordering Guide (Page 21) of the Rev. K datasheet. This compact 3.0 mm × 3.0 mm surface-mount package includes an exposed thermal pad and is supplied in tape-and-reel format only.
AD8510ARMZ-REEL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Amplifier Type:
- J-FET
- Number of Circuits:
- 1
- Output Type:
- -
- Slew Rate:
- 20V/µs
- Gain Bandwidth Product:
- 8 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 25 pA
- Voltage - Input Offset:
- 100 µV
- Current - Supply:
- 2.2mA
- Current - Output / Channel:
- 70 mA
- Voltage - Supply Span (Min):
- 9 V
- Voltage - Supply Span (Max):
- 36 V
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-MSOP
AD8510ARMZ-REEL FAQ
1.How can I place an order for AD8510ARMZ-REEL through Aetrix?
Please submit a Request for Quotation (RFQ) for AD8510ARMZ-REEL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD8510ARMZ-REEL reliable?
The price and inventory of AD8510ARMZ-REEL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD8510ARMZ-REEL is usually 5 days.
3.What payment methods are accepted for AD8510ARMZ-REEL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD8510ARMZ-REEL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD8510ARMZ-REEL?
AD8510ARMZ-REEL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD8510ARMZ-REEL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD8510ARMZ-REEL?
For technical support, including AD8510ARMZ-REEL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD8510ARMZ-REEL requirements.
6.How does Aetrix verify that AD8510ARMZ-REEL is sourced from the original manufacturer or authorized distributors?
All AD8510ARMZ-REEL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD8510ARMZ-REEL meets industry standards.
7.What is the process for return or replacement of AD8510ARMZ-REEL?
All AD8510ARMZ-REEL units undergo pre-shipment inspection (PSI). If there is an issue with AD8510ARMZ-REEL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD8510ARMZ-REEL part is unused and in its original packaging.
Return procedure for AD8510ARMZ-REEL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD8510ARMZ-REEL Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
