My Inquiry
My Account
Analog Devices Inc. AD8531ARZ-REEL
- Part No.:
- AD8531ARZ-REEL
- Manufacturer:
- Analog Devices Inc.
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
AD8531ARZ-REEL.pdf
- Description:
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,669
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD8531ARZ-REEL from Analog Devices is a single-channel, rail-to-rail input/output operational amplifier optimized for high-output-current drive (±250 mA) in single-supply systems (2.7 V to 6 V). It delivers 3 MHz gain bandwidth, 5 V/μs slew rate, and rail-to-rail swing at both inputs and outputs-enabling direct buffering of CMOS DACs and ASIC I/O in portable audio and LCD driver applications.
For engineers reviewing the AD8531ARZ-REEL datasheet, AD8531ARZ-REEL pinout, AD8531ARZ-REEL application, or AD8531ARZ-REEL equivalent, key selection criteria include output current capability under capacitive loads, supply current efficiency (750 μA/amplifier), thermal performance in SOIC-8 packaging, and absence of phase reversal across full input common-mode range.
Technical Context
The AD8531ARZ-REEL employs a CMOS input stage with dual differential pairs (N- and P-channel) biased by 50 μA current sources, enabling true rail-to-rail input operation down to GND and up to VS. Its compound folded-cascode second stage drives a complementary common-source output stage capable of ±250 mA into resistive or capacitive loads without external boost circuitry.
It exhibits no phase reversal when inputs exceed common-mode limits (within absolute max ratings), supports stable operation with up to 10 nF capacitive loads, and maintains unity-gain stability without compensation-critical for LCD panel drivers and headphone amplifiers where transient fidelity and load tolerance are design-critical.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | 2.7 V to 6 V - enables direct use from Li-ion (3.3 V) or USB-powered (5 V) rails without regulation |
| Output Current | ±250 mA - drives low-impedance loads like 600 Ω headphones or LCD segment lines without external transistors |
| Gain Bandwidth Product | 3 MHz - supports audio bandwidth (20 Hz–20 kHz) with >100× closed-loop gain margin |
| Slew Rate | 5 V/μs - ensures <1.4 μs settling to 0.01% for 4.9 VPP signals at 5 V supply |
| Input Offset Voltage | 25 mV (typ), 30 mV (max over −40°C to +85°C) - suitable for non-precision signal conditioning where output drive dominates accuracy needs |
| Supply Current per Amplifier | 750 μA (typ at 5 V), 1.25 mA (max over temp) - enables battery-operated designs with multi-amplifier configurations |
| Rail-to-Rail I/O | Yes - allows full-swing signal buffering in 3 V or 5 V single-supply systems, e.g., interfacing with 3.3 V logic or CMOS DACs |
Pinout & Package
AD8531ARZ-REEL is packaged in an 8-lead SOIC (R suffix), with exposed pad not present. Thermal resistance θJA = 158°C/W enables operation up to +85°C ambient with moderate power dissipation.
| Pin | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Inverting Input (−IN) | Differential input node; accepts voltages from GND to VS; no phase reversal on overdrive |
| 2 | Non-Inverting Input (+IN) | Differential input node; rail-to-rail common-mode range supports direct connection to CMOS outputs |
| 3 | V− (Ground) | Power return reference; must be low-impedance path to minimize noise coupling into high-current output stage |
| 4 | Output (OUT) | Capable of sourcing/sinking ±250 mA; output voltage swings within 100 mV of rails at 10 mA load |
| 5 | No Connect (NC) | Internally unconnected; must remain floating-no routing or grounding permitted |
| 6 | No Connect (NC) | Internally unconnected; must remain floating-no routing or grounding permitted |
| 7 | V+ (Supply) | Positive supply input; accepts 2.7 V to 6 V; absolute max 7 V; requires local 0.1 μF ceramic decoupling |
| 8 | No Connect (NC) | Internally unconnected; must remain floating-no routing or grounding permitted |
Key Features
| Feature | Design Value |
|---|---|
| No phase reversal | Guaranteed behavior across full input common-mode range (GND to VS); eliminates signal inversion risk in clamped or overdriven circuits |
| Rail-to-rail input and output | Enables full dynamic range utilization in 3 V and 5 V systems-e.g., buffering 0–3.3 V DAC outputs without level-shifting |
| High output current (±250 mA) | Drives heavy capacitive (up to 10 nF) and resistive (down to 600 Ω) loads directly-reduces BOM count vs. op amp + external buffer solutions |
| Low input bias current (5 pA typ) | Supports high-impedance sensor interfaces and precision integrators without significant offset error contribution |
| Unity-gain stable | Operates reliably in voltage-follower and gain-of-1 configurations without external compensation-simplifies layout for LCD biasing |
Applications
| Audio Line Driver | LCD Panel Driver |
|---|---|
Use Scenario: Driving balanced analog audio signals from a codec to line-level inputs in set-top boxes or sound cards. IC Role / Device Role / Timing Role: Single-supply, rail-to-rail voltage follower providing low-distortion, high-current buffering with minimal headroom loss. Use Value: Delivers full 2.5 VPP swing at 600 Ω load while maintaining <0.1% THD+N-eliminates need for dual supplies or discrete emitter followers. | Use Scenario: Generating segment and common electrode bias voltages in monochrome or segment-type LCD displays. IC Role / Device Role / Timing Role: High-current, DC-coupled buffer for static or multiplexed LCD voltage references (e.g., VCOM, VSEG). Use Value: Sustains stable output under 10 nF capacitive loading without oscillation-enables compact, low-component-count LCD bias networks. |
| ASIC I/O Interface | Headphone Amplifier |
Use Scenario: Level-shifting and driving high-capacitance traces between ASIC GPIOs and external peripherals in embedded control modules. IC Role / Device Role / Timing Role: Rail-to-rail input/output amplifier used as a bidirectional I/O buffer with programmable gain. Use Value: Accepts 0–5 V logic levels directly and drives >100 pF trace capacitance at 10 MHz edge rates-preserves signal integrity without timing skew. | Use Scenario: Delivering low-noise, high-current audio to stereo 16 Ω or 32 Ω headphones in portable media players. IC Role / Device Role / Timing Role: Ground-referenced, single-supply headphone driver operating from 3.3 V or 5 V system rail. Use Value: Provides >100 mW into 16 Ω with <0.05% THD+N at 1 kHz-meets portable audio SNR and power delivery requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar rail-to-rail, high-output-current op amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLC071CDR | Lower output current (±45 mA), higher supply current (1.5 mA), 10 MHz GBW | Not suitable for >600 Ω loads or capacitive LCD driving; better for wideband signal conditioning | Select when bandwidth >3 MHz is required and load current <50 mA suffices |
| OPA356AIDBVR | Higher slew rate (15 V/μs), lower output current (±50 mA), 200 MHz GBW, 5.5 V max supply | Optimized for RF/IF buffering-not rated for sustained ±250 mA drive or industrial temperature range | Select for high-speed, low-capacitance signal paths where output current demand is <60 mA |
Compared with TLC071CDR and OPA356AIDBVR, AD8531ARZ-REEL uniquely balances high output drive (±250 mA), rail-to-rail operation, and low quiescent current (750 μA) in an industrial-temperature SOIC package-making it irreplaceable for LCD biasing and headphone output stages where current delivery and supply efficiency are co-constrained.
Availability
AD8531ARZ-REEL is available at Aetrix Electronics and suitable for LCD panel driver designs, portable audio output stages, ASIC interface buffering, and single-supply reference amplification requiring stable component supply across extended temperature and volume production cycles.
Supply support for AD8531ARZ-REEL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving industrial, automotive, communications, and healthcare markets.
The AD853x family-including AD8531ARZ-REEL-is designed specifically for single-supply, high-output-current applications such as LCD biasing, audio output, and ASIC I/O buffering where rail-to-rail swing and capacitive load stability are essential.
FAQ
What is the maximum capacitive load the AD8531ARZ-REEL can drive without instability?
The AD8531ARZ-REEL is stable driving up to 10 nF capacitive loads in unity-gain configuration without external compensation. For loads exceeding 10 nF-such as large LCD panels-a series RC snubber (e.g., 5 Ω + 1 μF) reduces overshoot and ringing while preserving stability. The device's internal compensation ensures unity-gain stability across its full operating temperature range (−40°C to +85°C), and Figure 25–28 in the AD8531/AD8532/AD8534 Rev. F datasheet confirm this behavior at 2.7 V and 5 V supplies.
Does the AD8531ARZ-REEL have short-circuit protection?
No, the AD8531ARZ-REEL does not include internal short-circuit protection. Its output stage is optimized for ±250 mA continuous drive, and direct shorting to V+ or GND will cause irreversible damage. In applications with potential fault conditions, a low-value series resistor (e.g., 10–20 Ω) placed within the feedback loop limits peak current while minimally affecting small-signal performance. This approach is documented in Figure 37 of the AD8531/AD8532/AD8534 Rev. F datasheet and preserves output voltage headroom better than external current-limiting ICs.
Can the AD8531ARZ-REEL operate from a 3.3 V supply?
Yes, the AD8531ARZ-REEL is fully specified for operation from 2.7 V to 6 V, including standard 3.3 V rails. At 3.3 V, it delivers ±250 mA output current, 2.2 MHz gain bandwidth, and rail-to-rail input/output swing-supporting direct interfacing with 3.3 V logic, CMOS DACs, and low-voltage ASICs. Electrical characteristics in Table 1 (VS = 3.0 V) confirm VOH ≥ 2.85 V and VOL ≤ 100 mV at 10 mA load, ensuring robust noise margins in 3.3 V systems.
What is the thermal performance of the AD8531ARZ-REEL in SOIC-8 package?
The AD8531ARZ-REEL in 8-lead SOIC (R suffix) has a junction-to-ambient thermal resistance (θJA) of 158°C/W. At 5 V supply and 100 mA output current, typical power dissipation is ~350 mW, resulting in a junction temperature rise of ~55°C above ambient. With a maximum allowable junction temperature of 150°C, this allows reliable operation up to +85°C ambient-verified in Figure 38 of the Rev. F datasheet. No heatsink is required for most applications within these boundaries.
Is the AD8531ARZ-REEL pin-compatible with other members of the AD853x family?
No, the AD8531ARZ-REEL (single-channel, SOIC-8) is not pin-compatible with AD8532 (dual) or AD8534 (quad) variants. While all share identical electrical specifications and rail-to-rail architecture, their pinouts differ: AD8531ARZ-REEL uses pins 1–4 for −IN, +IN, V−, OUT, with pins 5, 6, and 8 as NC; AD8532 and AD8534 allocate pins for additional channels and lack NC assignments. Board layout must be specific to AD8531ARZ-REEL-no drop-in substitution is possible without PCB revision.
AD8531ARZ-REEL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Amplifier Type:
- General Purpose
- Number of Circuits:
- 1
- Output Type:
- Rail-to-Rail
- Slew Rate:
- 5V/µs
- Gain Bandwidth Product:
- 3 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 5 pA
- Voltage - Input Offset:
- 25 mV
- Current - Supply:
- 750µA
- Current - Output / Channel:
- 250 mA
- Voltage - Supply Span (Min):
- 2.7 V
- Voltage - Supply Span (Max):
- 6 V
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
AD8531ARZ-REEL FAQ
1.How can I place an order for AD8531ARZ-REEL through Aetrix?
Please submit a Request for Quotation (RFQ) for AD8531ARZ-REEL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD8531ARZ-REEL reliable?
The price and inventory of AD8531ARZ-REEL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD8531ARZ-REEL is usually 5 days.
3.What payment methods are accepted for AD8531ARZ-REEL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD8531ARZ-REEL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD8531ARZ-REEL?
AD8531ARZ-REEL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD8531ARZ-REEL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD8531ARZ-REEL?
For technical support, including AD8531ARZ-REEL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD8531ARZ-REEL requirements.
6.How does Aetrix verify that AD8531ARZ-REEL is sourced from the original manufacturer or authorized distributors?
All AD8531ARZ-REEL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD8531ARZ-REEL meets industry standards.
7.What is the process for return or replacement of AD8531ARZ-REEL?
All AD8531ARZ-REEL units undergo pre-shipment inspection (PSI). If there is an issue with AD8531ARZ-REEL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD8531ARZ-REEL part is unused and in its original packaging.
Return procedure for AD8531ARZ-REEL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD8531ARZ-REEL Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
