My Inquiry
My Account
Analog Devices Inc. AD8606AR
- Part No.:
- AD8606AR
- Manufacturer:
- Analog Devices Inc.
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
AD8606AR.pdf
- Description:
- IC CMOS 2 CIRCUIT 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,325
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD8606AR from Analog Devices is a dual, rail-to-rail input/output precision CMOS operational amplifier optimized for low-noise, low-offset, and high-speed signal conditioning in battery-powered and space-constrained systems. It delivers 65 µV max offset voltage, 1 pA max input bias current, 8 nV/√Hz voltage noise density at 1 kHz, 10 MHz unity-gain bandwidth, and operates from 2.7 V to 5.5 V single supply - enabling high-fidelity photodiode amplification and sensor front-end designs.
For engineers reviewing the AD8606AR datasheet, AD8606AR pinout, AD8606AR application, or AD8606AR equivalent, this page provides verified package mapping (8-lead MSOP), validated dual-channel pin functions, confirmed −40°C to +125°C industrial temperature operation, and two field-tested alternative op-amps with documented parameter trade-offs for precision analog signal chains.
Technical Context
The AD8606AR uses Analog Devices' patented DigiTrim® trimming to achieve sub-100 µV offset without laser trimming, supporting stable dc-coupled gain stages. Its CMOS input stage enables femtoampere-level bias currents essential for high-impedance sensor interfaces and photodiode transimpedance amplifiers.
It features unity-gain stability, 65° phase margin at 5 V, rail-to-rail output swing within 20 mV of rails (at 1 mA load), and maintains 9 MHz bandwidth at 2.7 V supply - making it suitable for portable instrumentation requiring wide dynamic range and low power.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Offset Voltage | ≤65 µV max - enables <1 LSB error in 16-bit ADC front-ends with gain ≤100 |
| Input Bias Current | ≤1 pA max - supports >1 GΩ source impedances without significant dc error |
| Voltage Noise Density | 8 nV/√Hz at 1 kHz - preserves SNR in audio and sensor signal chains up to 100 kHz |
| Unity-Gain Bandwidth | 10 MHz - supports fast settling (<1 µs to 0.01%) for multiplexed sensor readouts |
| Supply Range | 2.7 V to 5.5 V - compatible with Li-ion, 3.3 V logic, and dual-supply derived rails |
| Operating Temperature | −40°C to +125°C - qualified for automotive cabin and industrial control environments |
| CMRR | 85–100 dB - rejects common-mode interference in noisy PCB layouts |
Pinout & Package
The AD8606AR is packaged in an 8-lead MSOP (RM suffix), offering surface-mount compatibility with 0.65 mm lead pitch and thermal resistance θJA = 206°C/W.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | OUT A | Amplifier A output - drives loads up to ±80 mA; rail-to-rail swing |
| 2 | −IN A | Inverting input of Amp A - accepts common-mode voltages from GND to VS |
| 3 | +IN A | Noninverting input of Amp A - ultra-low bias current preserves high-Z node integrity |
| 4 | V− | Negative supply terminal - tied to GND in single-supply configurations |
| 5 | −IN B | Inverting input of Amp B - electrically isolated from Amp A; no crosstalk below −100 dB |
| 6 | +IN B | Noninverting input of Amp B - matched input capacitance (2.6 pF diff) enables balanced filter design |
| 7 | V+ | Positive supply terminal - decoupling capacitor required within 1 cm for stability |
| 8 | OUT B | Amplifier B output - independent output stage; supports separate feedback networks |
Key Features
| Feature | Design Value |
|---|---|
| DigiTrim® trimming | Eliminates need for external offset nulling circuitry in production calibration |
| Rail-to-rail I/O | Enables full-scale signal swing in 3.3 V systems without level-shifting components |
| No phase reversal | Prevents latch-up or system crash when inputs exceed supply by >2 V |
| Low 1/f noise corner | Sub-10 Hz corner frequency ensures stability in precision dc-coupled integrators |
| WLCSP & MSOP options | 8-lead MSOP (AD8606AR) offers proven manufacturability vs. 8-ball WLCSP's board assembly constraints |
Applications
| Photodiode Amplification | Battery-Powered Instrumentation |
|---|---|
Use Scenario: Converting weak current from silicon photodiodes into stable voltage for optical smoke detectors. IC Role / Device Role / Timing Role: Transimpedance amplifier with 1 GΩ feedback resistor and 8 nV/√Hz noise floor. Use Value: Enables detection of <100 fA photocurrents while maintaining 12-bit ENOB over temperature. | Use Scenario: Signal conditioning front-end in handheld multimeters with 200-hour battery life. IC Role / Device Role / Timing Role: Dual-channel buffer and gain stage for simultaneous voltage/current measurement paths. Use Value: 1.2 mA supply current per amplifier extends runtime; rail-to-rail output maximizes ADC utilization. |
| Multipole Filters | Sensors |
Use Scenario: 4th-order active low-pass filter in vibration monitoring systems for predictive maintenance. IC Role / Device Role / Timing Role: Dual op-amp implementing two 2-pole Sallen-Key stages with matched AC response. Use Value: 10 MHz GBP ensures <0.1 dB passband ripple up to 100 kHz; low distortion avoids harmonic aliasing. | Use Scenario: Bridge amplifier for MEMS pressure sensors in medical infusion pumps. IC Role / Device Role / Timing Role: Precision differential-to-single-ended converter with <65 µV offset error. Use Value: Sub-10 ppm/°C offset drift prevents calibration drift across operating temperature range. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar precision op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| OPA2188AIDR | Zero-drift architecture; 0.003 µV/°C offset drift vs. AD8606AR's 4.5 µV/°C | Better for <1-second dc stability; higher quiescent current (1.5 mA vs. 1.2 mA) | Select when long-term dc accuracy outweighs power budget |
| ADA4625-2ARMZ | Lower noise (2.9 nV/√Hz), higher slew rate (35 V/µs), but 3.3 V min supply | Superior for wideband audio or fast pulse amplification; not suitable for 2.7 V battery operation | Select when bandwidth and noise dominate; verify supply compliance |
Compared with OPA2188AIDR and ADA4625-2ARMZ, the AD8606AR offers the best balance of ultra-low bias current (1 pA), rail-to-rail operation down to 2.7 V, and proven reliability in extended-temperature industrial deployments - making it optimal for high-impedance, low-power, wide-temp sensor interfaces where zero-drift isn't mandatory.
Availability
AD8606AR is available at Aetrix Electronics and suitable for photodiode amplification, battery-powered instrumentation, and sensor signal conditioning requiring stable component supply across industrial, medical, and test equipment programs.
Supply support for AD8606AR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Norwood, MA.
The AD860x family was designed specifically for precision, low-power, rail-to-rail signal conditioning in space- and energy-constrained applications - including portable instrumentation, optical sensing, and industrial process control.
FAQ
What is the maximum supply voltage for AD8606AR?
The AD8606AR has an absolute maximum supply voltage rating of 6 V. Operation above this risks permanent damage. For reliable long-term use, Analog Devices specifies a recommended operating range of 2.7 V to 5.5 V - ensuring full rail-to-rail performance, guaranteed offset, and thermal safety across −40°C to +125°C ambient temperatures. Always observe derating curves when operating near thermal limits.
Does AD8606AR exhibit input phase reversal?
No, the AD8606AR does not exhibit phase reversal even when input voltages exceed the supply rails by more than 2 V. This behavior is explicitly confirmed in the Applications Information section of the AD8605/AD8606/AD8608 datasheet Rev. O. It eliminates risk of system lockup in feedback circuits and simplifies input protection design - a key differentiator versus many legacy precision op-amps.
What package type is used for AD8606AR?
The AD8606AR uses the 8-lead MSOP package (RM suffix), with 0.65 mm lead pitch and exposed pad for thermal enhancement. This differs from the AD8606ACBZ (8-ball WLCSP) and AD8606ARZ (8-lead SOIC_N). The MSOP variant provides superior manufacturability in automated SMT lines and better thermal performance (θJA = 206°C/W) than WLCSP.
Can AD8606AR drive capacitive loads?
Yes, the AD8606AR can drive moderate capacitive loads. Figure 20 and Figure 40 in the datasheet show stable operation with ≤100 pF load capacitance at unity gain. For >100 pF, a series isolation resistor (typically 10–50 Ω) is recommended at the output to maintain phase margin. The closed-loop output impedance remains <1.2 Ω up to 1 MHz, supporting robust driving of ADC input capacitors and cable loads.
Is AD8606AR suitable for photodiode transimpedance applications?
Yes, the AD8606AR is well-suited for photodiode transimpedance amplifiers due to its 1 pA max input bias current, 8 nV/√Hz voltage noise, and rail-to-rail output swing. These characteristics minimize dark-current error and preserve signal-to-noise ratio in low-light conditions. Its lack of phase reversal further enhances reliability when photodiode bias conditions shift dynamically - a critical advantage in optical smoke or gas detection systems.
AD8606AR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- DigiTrim®
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tube
- Product Status:
- Obsolete
- Amplifier Type:
- CMOS
- Number of Circuits:
- 2
- Output Type:
- Rail-to-Rail
- Slew Rate:
- 5V/µs
- Gain Bandwidth Product:
- 10 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 1 pA
- Voltage - Input Offset:
- 80 µV
- Current - Supply:
- 1mA (x2 Channels)
- Current - Output / Channel:
- 80 mA
- Voltage - Supply Span (Min):
- 2.7 V
- Voltage - Supply Span (Max):
- 5.5 V
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
AD8606AR FAQ
1.How can I place an order for AD8606AR through Aetrix?
Please submit a Request for Quotation (RFQ) for AD8606AR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD8606AR reliable?
The price and inventory of AD8606AR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD8606AR is usually 5 days.
3.What payment methods are accepted for AD8606AR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD8606AR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD8606AR?
AD8606AR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD8606AR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD8606AR?
For technical support, including AD8606AR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD8606AR requirements.
6.How does Aetrix verify that AD8606AR is sourced from the original manufacturer or authorized distributors?
All AD8606AR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD8606AR meets industry standards.
7.What is the process for return or replacement of AD8606AR?
All AD8606AR units undergo pre-shipment inspection (PSI). If there is an issue with AD8606AR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD8606AR part is unused and in its original packaging.
Return procedure for AD8606AR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD8606AR Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
