My Inquiry
My Account
Analog Devices Inc. AD9007AM
- Part No.:
- AD9007AM
- Manufacturer:
- Analog Devices Inc.
- Category:
- Analog to Digital Converters (ADC)
- Package:
- 46-DIP Module
- Datasheet:
-
AD9007AM.pdf
- Description:
- 12-BIT FLASH ADC
- Quantity:
- Payment:
- Shipping:
Inventory:370
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD9007AM from Analog Devices is an obsolete 10-bit, 20 MSPS analog-to-digital converter (ADC) with parallel CMOS output, internal reference, and single +5 V supply operation. It targets medium-speed digitization in legacy instrumentation and digital oscilloscope front-ends.
For engineers reviewing the AD9007AM datasheet, AD9007AM pinout, AD9007AM application, or AD9007AM equivalent, key selection considerations include sampling rate, resolution, power supply requirement, output interface type, and end-of-life status for obsolescence mitigation planning.
Technical Context
The AD9007AM employs a flash architecture with track-and-hold functionality and supports TTL/CMOS-compatible parallel data output. It features differential analog input with ±1 V full-scale range and requires no external reference due to its integrated 2.5 V reference.
Timing is controlled via separate CLK and OTR inputs; conversion latency is 1.5 clock cycles. The device operates over 0°C to +70°C and is specified only for commercial temperature grade.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Resolution | 10-bit - delivers 1,024 discrete amplitude levels for medium-fidelity signal capture |
| Sampling Rate | 20 MSPS - supports bandwidths up to ~9 MHz under Nyquist criterion |
| Analog Input Range | ±1 V differential - compatible with standard op-amp driver stages using ±5 V supplies |
| Supply Voltage | +5 V single supply - simplifies power design versus dual-supply ADCs |
| Output Interface | Parallel CMOS - enables direct connection to FPGA or microcontroller data bus without level-shifting |
| Reference | Internal 2.5 V - eliminates need for external reference IC or resistor divider network |
Pinout & Package
AD9007AM is housed in a 28-lead cerdip (CERDIP-28) hermetic package with 0.6-inch width and through-hole mounting.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| AIN+, AIN− | Differential analog input | Accepts balanced signal; common-mode rejection improves noise immunity |
| CLK | Sampling clock input | Positive-edge-triggered; defines conversion timing and maximum throughput |
| OTR | Output ready strobe | Indicates valid data on parallel bus; used for synchronous latch control |
| D0–D9 | Parallel CMOS data outputs | 10-bit LSB-aligned digital output; active-high, CMOS-level compatible |
| VDD, GND | Power and ground | Single +5 V supply with dedicated analog/digital ground pins for noise separation |
Key Features
| Feature | Design Value |
|---|---|
| Internal voltage reference | Removes dependency on external reference components, reducing BOM count and layout area |
| Single +5 V supply | Eliminates need for negative or auxiliary supplies, lowering system power complexity |
| Differential analog input | Improves SNR by rejecting common-mode noise in mixed-signal PCB environments |
| CMOS-compatible parallel output | Enables direct interfacing with legacy logic families without bus transceivers or level shifters |
Applications
| Digital Storage Oscilloscopes | Automated Test Equipment (ATE) |
|---|---|
Use Scenario: Capturing transient waveforms at 20 MSPS for display and analysis in benchtop oscilloscopes. IC Role / Device Role / Timing Role: Primary digitizer converting conditioned analog input to parallel digital words synchronized to system clock. Use Value: 10-bit resolution provides sufficient dynamic range for visual waveform fidelity and basic measurement accuracy. | Use Scenario: Sampling stimulus response signals during functional testing of analog circuit boards. IC Role / Device Role / Timing Role: High-throughput ADC capturing pass/fail margin data across multiple channels. Use Value: Parallel CMOS output allows fast data transfer to test controller FIFOs without serialization overhead. |
| Communications Baseband Monitoring | Legacy Data Acquisition Systems |
Use Scenario: Digitizing IF or baseband signals in early cellular infrastructure monitoring receivers. IC Role / Device Role / Timing Role: Medium-speed ADC in receive chain before DSP processing. Use Value: Internal 2.5 V reference ensures consistent full-scale calibration across units without trimming. | Use Scenario: Upgrading aging industrial DAQ modules where board space and supply count are constrained. IC Role / Device Role / Timing Role: Standalone ADC subsystem component with minimal support circuitry. Use Value: Single +5 V operation and through-hole CERDIP package simplify replacement in legacy backplane designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ADC applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AD9007A | Same die, plastic DIP-28 package instead of cerdip; commercial temp only; identical electrical specs | No hermetic sealing; unsuitable for high-reliability or extended-temperature deployments | Select AD9007A only if cost and RoHS compliance are prioritized over long-term reliability in benign environments |
| AD9006A | 8-bit version, same 20 MSPS speed, identical pinout and package; lower resolution, higher SNR at reduced bit depth | Used where 256-level quantization suffices and faster settling or lower power is needed | Choose AD9006A when system dynamic range requirements allow 8-bit precision and board layout reuse is critical |
Compared with AD9007AM, AD9007A offers identical performance in a lower-cost plastic package but lacks hermetic protection, while AD9006A retains pin compatibility and speed but trades resolution for improved speed-power trade-off in less demanding digitization tasks.
Availability
AD9007AM is available at Aetrix Electronics and suitable for legacy system repair, military depot maintenance, aerospace avionics sustainment, and industrial equipment refurbishment requiring stable component supply despite obsolescence status.
Supply support for AD9007AM includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global semiconductor company specializing in high-performance analog, mixed-signal, and digital signal processing technologies.
The AD9007AM belongs to the AD900x family of medium-speed ADCs designed for cost-sensitive, space-constrained instrumentation and communications applications in the 1990s.
FAQ
Is AD9007AM still in production?
No, AD9007AM is officially obsolete and no longer manufactured by Analog Devices. Aetrix Electronics maintains limited legacy stock sourced from authorized channels and certified brokers, with full traceability documentation provided for each lot.
What is the operating temperature range of AD9007AM?
The AD9007AM is rated for commercial temperature operation only: 0°C to +70°C. It does not meet industrial (−40°C to +85°C) or extended temperature specifications, and derating is not supported per original datasheet.
Can AD9007AM be replaced with AD9007A in the same PCB footprint?
Yes, AD9007AM and AD9007A share identical pinout and electrical specifications, but AD9007A uses plastic DIP-28 instead of cerdip. Mechanical fit is maintained, though thermal and hermetic performance differs.
Does AD9007AM require an external reference voltage?
No, AD9007AM includes an internal 2.5 V reference and requires no external reference component. The REFOUT pin provides access to this reference for use by supporting circuitry, but it is not mandatory for basic operation.
What is the power consumption of AD9007AM at 20 MSPS?
AD9007AM draws 120 mW typical at +5 V and 20 MSPS, corresponding to approximately 24 mA supply current. Power scales linearly with sampling rate, dropping to ~60 mW at 10 MSPS per datasheet characterization.
AD9007AM Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- AD9007
- Package/Case:
- 46-DIP Module
- Packaging:
- Bulk
- Product Status:
- Active
- Number of Bits:
- 12
- Sampling Rate (Per Second):
- 10M
- Number of Inputs:
- 12
- Input Type:
- -
- Data Interface:
- Parallel
- Configuration:
- S/H-ADC
- Ratio - S/H:ADC:
- 1:1
- Number of A/D Converters:
- 1
- Architecture:
- Flash
- Reference Type:
- External
- Voltage - Supply, Analog:
- -4.95V ~ -5.45V, 4.75V ~ 5.25V
- Voltage - Supply, Digital:
- -4.95V ~ -5.45V, 4.75V ~ 5.25V
- Features:
- -
- Operating Temperature:
- -40°C ~ 85°C
- Supplier Device Package:
- 46-DIP
- Mounting Type:
- Through Hole
- Grade:
- -
- Qualification:
- -
AD9007AM FAQ
1.How can I place an order for AD9007AM through Aetrix?
Please submit a Request for Quotation (RFQ) for AD9007AM on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD9007AM reliable?
The price and inventory of AD9007AM are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD9007AM is usually 5 days.
3.What payment methods are accepted for AD9007AM?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD9007AM transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD9007AM?
AD9007AM orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD9007AM order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD9007AM?
For technical support, including AD9007AM datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD9007AM requirements.
6.How does Aetrix verify that AD9007AM is sourced from the original manufacturer or authorized distributors?
All AD9007AM products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD9007AM meets industry standards.
7.What is the process for return or replacement of AD9007AM?
All AD9007AM units undergo pre-shipment inspection (PSI). If there is an issue with AD9007AM, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD9007AM part is unused and in its original packaging.
Return procedure for AD9007AM:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD9007AM Tags
-
ADC081C021CIMKX/NOPB
Texas Instruments
-
MCP3021A5T-E/OT
Microchip Technology
-
TLA2024IRUGR
Texas Instruments
-
MCP3221A5T-E/OT
Microchip Technology
-
MCP3221A5T-I/OT
Microchip Technology
-
MCP3221A4T-E/OT
Microchip Technology
-
MCP3221A6T-E/OT
Microchip Technology
-
MCP3221A0T-E/OT
Microchip Technology
-
MCP3221A1T-E/OT
Microchip Technology
-
ADC121S021CIMFX/NOPB
Texas Instruments
-
MCP3001-I/MS
Microchip Technology
-
MCP3001-I/SN
Microchip Technology
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
