Analog Devices Inc. AD9213-10GEBZ-B

Overview

AD9213-10GEBZ-B from Analog Devices is a 12-bit, 10.25 GSPS RF analog-to-digital converter with 6.5 GHz input bandwidth, JESD204B 16-lane interface (up to 16 Gbps), integrated digital downconverter (DDC), and multichip synchronization capability. It delivers −155 dBFS/Hz noise spectral density at 170 MHz input and 70 dBFS SFDR at 1 GHz, targeting wideband radar and electronic warfare systems.

For engineers reviewing the AD9213-10GEBZ-B datasheet, AD9213-10GEBZ-B pinout, AD9213-10GEBZ-B application, or AD9213-10GEBZ-B equivalent, this evaluation board enables rapid validation of high-speed RF sampling performance, deterministic latency alignment in phased-array systems, and DDC-based frequency translation with 16 NCO profiles - critical for EW signal intelligence and 5G mmWave test equipment.

Technical Context

The AD9213-10GEBZ-B implements an interleaved pipeline ADC architecture with proprietary calibration and randomization to suppress interleaving spurs, achieving <4.6 W typical power at 10.25 GSPS. Its on-chip DDC includes a 48-bit NCO and decimation filters supporting factors of two or three, enabling real-time bandwidth reduction without external FPGA logic.

Multichip synchronization is supported via sample-accurate SYSREF alignment across multiple AD9213 devices, with averaged and sampled SYSREF modes compliant with JESD204B Subclass 1. The board routes all 16 SERDOUT differential lanes, dual clock inputs (CLK_P/CLK_N), and dedicated SYNCINB, TRIG, and FD signals for system-level timing control.

Key Specifications

Availability

AD9213-10GEBZ-B is available at Aetrix Electronics and suitable for RF test instrumentation, phased-array radar receivers, electronic warfare signal intelligence systems, and 5G mmWave channel emulation requiring stable component supply and fast evaluation turnaround.

Supply support for AD9213-10GEBZ-B includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing technologies, headquartered in Norwood, MA, with R&D and manufacturing infrastructure spanning North America, Europe, and Asia.

The AD9213 product line was designed specifically for ultra-wideband RF digitization in defense and communications infrastructure, emphasizing sample-accurate multichip synchronization, low CER (<1×10⁻¹⁶), and integrated DSP to reduce system-level FPGA complexity.

FAQ

What is the primary function of the AD9213-10GEBZ-B evaluation board?

The AD9213-10GEBZ-B is a fully populated, ready-to-use evaluation platform for the AD9213-10G RF ADC. It provides reference clock distribution, analog input matching networks, JESD204B lane routing, and SPI control interfaces - enabling immediate characterization of the AD9213-10G's 10.25 GSPS sampling, DDC operation, and multichip sync without custom PCB design.

Does the AD9213-10GEBZ-B support JESD204B Subclass 1 deterministic latency?

Yes, the AD9213-10GEBZ-B supports JESD204B Subclass 1 operation with full SYSREF capture and LMFC alignment. The board routes both SYSREF_P/N and SYNCINB_P/N signals with controlled impedance and matched lengths, allowing precise setup/hold timing for deterministic latency configuration as specified in the AD9213-10G datasheet Rev. A.

Can the AD9213-10GEBZ-B be used to evaluate the integrated digital downconverter (DDC)?

Yes, the AD9213-10GEBZ-B enables full DDC evaluation including NCO frequency tuning, decimation factor selection (×2 or ×3), complex-to-real conversion, and gain staging. Firmware and software tools provided by Analog Devices allow real-time configuration of all 16 NCO profiles and DDC filter coefficients directly through the board's SPI interface.

What analog input interface does the AD9213-10GEBZ-B provide?

The AD9213-10GEBZ-B features a 50 Ω single-ended SMA input connector routed through a broadband balun to the AD9213-10G's differential VIN_P/VIN_N pins. The analog path includes DC blocking capacitors, impedance-matching networks, and overvoltage protection circuitry - optimized for −1.0 dBFS full-scale operation with 1.4 V p-p differential swing.

Is the AD9213-10GEBZ-B compatible with the Analog Devices FMC+ carrier platforms?

No, the AD9213-10GEBZ-B uses a proprietary high-speed interconnect and is not mechanically or electrically compatible with standard FMC or FMC+ specifications. It requires the HSC-ADC-EVALCZ high-speed data capture card or direct connection to a JESD204B-enabled FPGA development platform with 16 differential lanes and Subclass 1 support.